Capillary flow of liquids plays a key role in many applications including lab-on-a-chip devices, heat pipes and printed electronics manufacturing. Open rectangular microchannels often appear in these applications, with the lack of a top resulting in a complex free-surface morphology and evaporation. In this work we develop a theoretical model based on lubrication theory and kinetically limited evaporation to examine capillary flow of evaporating liquid solutions in open rectangular microchannels connected to circular reservoirs. The model accounts for the complex free-surface morphology, solvent evaporation, Marangoni flows due to gradients in solute concentration and temperature and finite-size reservoir effects. Significant differences are predicted in flow behaviour between pure liquids and liquid solutions due to solvent evaporation and solute transport. Marangoni flows are found to promote more uniform solute deposition patterns after solvent evaporation. Model predictions of meniscus position evolution are in good agreement with prior capillary-flow experiments of aqueous poly(vinyl alcohol) solutions in the presence of evaporation. The model reveals that the principal mechanism through which evaporation influences the meniscus position in the experiments is the increase in viscosity with solute concentration.
more »
« less
Capillary-flow dynamics in open rectangular microchannels
Spontaneous capillary flow of liquids in narrow spaces plays a key role in a plethora of applications including lab-on-a-chip devices, heat pipes, propellant management devices in spacecrafts and flexible printed electronics manufacturing. In this work we use a combination of theory and experiment to examine capillary-flow dynamics in open rectangular microchannels, which are often found in these applications. Scanning electron microscopy and profilometry are used to highlight the complexity of the free-surface morphology. We develop a self-similar lubrication-theory-based model accounting for this complexity and compare model predictions to those from the widely used modified Lucas–Washburn model, as well as experimental observations over a wide range of channel aspect ratios $\lambda$ and equilibrium contact angles $\theta _0$ . We demonstrate that for large $\lambda$ the two model predictions are indistinguishable, whereas for smaller $\lambda$ the lubrication-theory-based model agrees better with experiments. The lubrication-theory-based model is also shown to have better agreement with experiments at smaller $\theta _0$ , although as $\theta _0\rightarrow {\rm \pi}/4$ it fails to account for important axial curvature contributions to the free surface and the agreement worsens. Finally, we show that the lubrication-theory-based model also quantitatively predicts the dynamics of fingers that extend ahead of the meniscus. These findings elucidate the limitations of the modified Lucas–Washburn model and demonstrate the importance of accounting for the effects of complex free-surface morphology on capillary-flow dynamics in open rectangular microchannels.
more »
« less
- Award ID(s):
- 1634263
- NSF-PAR ID:
- 10310948
- Date Published:
- Journal Name:
- Journal of Fluid Mechanics
- Volume:
- 911
- ISSN:
- 0022-1120
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Capillary flow is the spontaneous wicking of liquids in narrow spaces without the assistance of external forces. Examples of capillary flow can be found in numerous applications ranging from controlling and transporting fuel in spacecrafts to printed electronics manufacturing. Open rectangular microchannels often appear in these applications, with the lack of a top resulting in a complex free-surface morphology and evaporation. Here, we present a brief overview of this topic and discuss some recent advances.
-
null (Ed.)We examine the axisymmetric and non-axisymmetric flows of thin fluid films over a spherical glass dome. A thin film is formed by raising a submerged dome through a silicone oil mixture composed of a volatile, low surface tension species (1 cSt, solvent) and a non-volatile species at a higher surface tension (5 cSt, initial solute volume fraction $\phi _0$ ). Evaporation of the 1 cSt silicone oil establishes a concentration gradient and, thus, a surface tension gradient that drives a Marangoni flow that leads to the formation of an initially axisymmetric mound. Experimentally, when $\phi _0 \leqslant 0.3\,\%$ , the mound grows axisymmetrically for long times (Rodríguez-Hakim et al. , Phys. Rev. Fluids , vol. 4, 2019, pp. 1–22), whereas when $\phi _0 \geqslant 0.35\,\%$ , the mound discharges in a preferred direction, thereby breaking symmetry. Using lubrication theory and numerical solutions, we demonstrate that, under the right conditions, external disturbances can cause an imbalance between the Marangoni flow and the capillary flow, leading to symmetry breaking. In both experiments and simulations, we observe that (i) the apparent, most amplified disturbance has an azimuthal wavenumber of unity, and (ii) an enhanced Marangoni driving force (larger $\phi _0$ ) leads to an earlier onset of the instability. The linear stability analysis shows that capillarity and diffusion stabilize the system, while Marangoni driving forces contribute to the growth in the disturbances.more » « less
-
null (Ed.)We study the dynamic wetting of a self-propelled viscous droplet using the time-dependent lubrication equation on a conical-shaped substrate for different cone radii, cone angles and slip lengths. The droplet velocity is found to increase with the cone angle and the slip length, but decrease with the cone radius. We show that a film is formed at the receding part of the droplet, much like the classical Landau–Levich–Derjaguin film. The film thickness $h_f$ is found to decrease with the slip length $\lambda$ . By using the approach of matching asymptotic profiles in the film region and the quasi-static droplet, we obtain the same film thickness as the results from the lubrication approach for all slip lengths. We identify two scaling laws for the asymptotic regimes: $h_fh''_o \sim Ca^{2/3}$ for $\lambda \ll h_f$ and $h_f h''^{3}_o\sim (Ca/\lambda )^2$ for $\lambda \gg h_f$ ; here, $1/h''_o$ is a characteristic length at the receding contact line and $Ca$ is the capillary number. We compare the position and the shape of the droplet predicted from our continuum theory with molecular dynamics simulations, which are in close agreement. Our results show that manipulating the droplet size, the cone angle and the slip length provides different schemes for guiding droplet motion and coating the substrate with a film.more » « less
-
Experiments have shown that flow in compliant microchannels can become unstable at a much lower Reynolds number than the corresponding flow in a rigid conduit. Therefore, it has been suggested that the wall's elastic compliance can be exploited towards new modalities of microscale mixing. While previous studies mainly focused on the local instability induced by the fluid–structure interactions (FSIs) in the system, we derive a one-dimensional (1-D) model to study the FSI's effect on the global instability. The proposed 1-D FSI model is tailored to long, shallow rectangular microchannels with a deformable top wall, similar to the experiments. Going beyond the usual lubrication flows analysed in these geometries, we include finite fluid inertia and couple the reduced flow equations to a novel reduced 1-D wall deformation equation. Although a quantitative comparison with previous experiments is difficult, the behaviours of the proposed model show, qualitatively, agreement with the experimental observations, and capture several key effects. Specifically, we find the critical conditions under which the inflated base state of the 1-D FSI model is linearly unstable to infinitesimal perturbations. The critical Reynolds numbers predicted are in agreement with experimental observations. The unstable modes are highly oscillatory, with frequencies close to the natural frequency of the wall, suggesting that the observed instabilities are resonance phenomena. Furthermore, during the start-up from an undeformed initial state, self-sustained oscillations can be triggered by FSI. Our modelling framework can be applied to other microfluidic systems with similar geometric scale separation under different operating conditions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/jfm.2020.986
