Touch as a modality in social communication has been getting more attention with recent developments in wearable technology and an increase in awareness of how limited physical contact can lead to touch starvation and feelings of depression. Although several mediated touch methods have been developed for conveying emotional support, the transfer of emotion through mediated touch has not been widely studied. This work addresses this need by exploring emotional communication through a novel wearable haptic system. The system records physical touch patterns through an array of force sensors, processes the recordings using novel gesture-based algorithms to create actuator control signals, and generates mediated social touch through an array of voice coil actuators. We conducted a human subject study ( N = 20) to understand the perception and emotional components of this mediated social touch for common social touch gestures, including poking, patting, massaging, squeezing, and stroking. Our results show that the speed of the virtual gesture significantly alters the participants' ratings of valence, arousal, realism, and comfort of these gestures with increased speed producing negative emotions and decreased realism. The findings from the study will allow us to better recognize generic patterns from human mediated touch perception and determine how mediated social touch can be used to convey emotion. Our system design, signal processing methods, and results can provide guidance in future mediated social touch design.
more »
« less
Wearable System for Generating Mediated Social Touch through Force Mapping
Due to the COVID-19 crisis, social distancing has been a necessary and effective means of reducing disease through decreased close human contact. However, there has been a corresponding increase in touch starvation due to limited physical contact. Our research seeks to create a solution for allowing individuals to safely communicate through touch over
a distance. Our system consists of wearable sensors to measure the social touch gesture, which is then processed and sent to an array of voice coils in an actuator device.
more »
« less
- Award ID(s):
- 2047867
- NSF-PAR ID:
- 10312999
- Date Published:
- Journal Name:
- IEEE World Haptics Conference Hands-On Demonstrations
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Traditional fingerprint authentication requires the acquisition of data through touch-based specialized sensors. However, due to many hygienic concerns including the global spread of the COVID virus through contact with a surface has led to an increased interest in contactless fingerprint image acquisition methods. Matching fingerprints acquired using contactless imaging against contact-based images brings up the problem of performing cross modal fingerprint matching for identity verification. In this paper, we propose a cost-effective, highly accurate and secure end-to-end contactless fingerprint recognition solution. The proposed framework first segments the finger region from an image scan of the hand using a mobile phone camera. For this purpose, we developed a cross-platform mobile application for fingerprint enrollment, verification, and authentication keeping security, robustness, and accessibility in mind. The segmented finger images go through fingerprint enhancement to highlight discriminative ridge-based features. A novel deep convolutional network is proposed to learn a representation from the enhanced images based on the optimization of various losses. The proposed algorithms for each stage are evaluated on multiple publicly available contactless databases. Our matching accuracy and the associated security employed in the system establishes the strength of the proposed solution framework.more » « less
-
null (Ed.)This paper proposes and evaluates the use of image classification for detailed, full-body human-robot tactile interaction. A camera positioned below a translucent robot skin captures shadows generated from human touch and infers social gestures from the captured images. This approach enables rich tactile interaction with robots without the need for the sensor arrays used in traditional social robot tactile skins. It also supports the use of touch interaction with non-rigid robots, achieves high-resolution sensing for robots with different sizes and shape of surfaces, and removes the requirement of direct contact with the robot. We demonstrate the idea with an inflatable robot and a standing-alone testing device, an algorithm for recognizing touch gestures from shadows that uses Densely Connected Convolutional Networks, and an algorithm for tracking positions of touch and hovering shadows. Our experiments show that the system can distinguish between six touch gestures under three lighting conditions with 87.5 - 96.0% accuracy, depending on the lighting, and can accurately track touch positions as well as infer motion activities in realistic interaction conditions. Additional applications for this method include interactive screens on inflatable robots and privacy-maintaining robots for the home.more » « less
-
Madden, John D. ; Anderson, Iain A. ; Shea, Herbert R. (Ed.)Ras Labs makes Synthetic Muscle™, which is a class of electroactive polymer (EAP) based materials and actuators that sense pressure (gentle touch to high impact), controllably contract and expand at low voltage (1.5 V to 50 V, including use of batteries), and attenuate force. We are in the robotics era, but robots do have their challenges. Currently, robotic sensing is mainly visual, which is useful up until the point of contact. To understand how an object is being gripped, tactile feedback is needed. For handling fragile objects, if the grip is too tight, breakage occurs, and if the grip is too loose, the object will slip out of the grasp, also leading to breakage. Rigid robotic grippers using a visual feedback loop can struggle to determine the exact point and quality of contact. Robotic grippers can also get a stuttering effect in the visual feedback loop. By using soft Synthetic Muscle™ based EAP pads as the sensors, immediate feedback was generated at the first point of contact. Because these pads provided a soft, compliant interface, the first point of contact did not apply excessive force, allowing the force applied to the object to be controlled. The EAP sensor could also detect a change in pressure location on its surface, making it possible to detect and prevent slippage by then adjusting the grip strength. In other words, directional glide provided feedback for the presence of possible slippage to then be able to control a slightly tighter grip, without stutter, due to both the feedback and the soft gentleness of the fingertip-like EAP pads themselves. The soft nature of the EAP fingertip pad also naturally held the gripped object, improving the gripping quality over rigid grippers without an increase in applied force. Analogous to finger-like tactile touch, the EAPs with appropriate coatings and electronics were positioned as pressure sensors in the fingertip or end effector regions of robotic grippers. This development of using Synthetic Muscle™ based EAPs as soft sensors provided for sensors that feel like the pads of human fingertips. Basic pressure position and magnitude tests have been successful, with pressure sensitivity down to 0.05 N. Most automation and robots are very strong, very fast, and usually need to be partitioned away from humans for safety reasons. For many repetitive tasks that humans do with delicate or fragile objects, it would be beneficial to use robotics; whether it is for agriculture, medical surgery, therapeutic or personal care, or in extreme environments where humans cannot enter, including with contagions that have no cure. Synthetic Muscle™ was also retrofitted as actuator systems into off-the-shelf robotic grippers and is being considered in novel biomimetic gripper designs, operating at low voltages (less than 50 V). This offers biomimetic movement by contracting like human muscles, but also exceeds natural biological capabilities by expanding under reversed electric polarity. Human grasp is gentle yet firm, with tactile touch feedback. In conjunction with shape-morphing abilities, these EAPs also are being explored to intrinsically sense pressure due to the correlation between mechanical force applied to the EAP and its electronic signature. The robotic field is experiencing phenomenal growth in this fourth phase of the industrial revolution, the robotics era. The combination of Ras Labs’ EAP shape-morphing and sensing features promises the potential for robotic grippers with human hand-like control and tactile sensing. This work is expected to advance both robotics and prosthetics, particularly for collaborative robotics to allow humans and robots to intuitively work safely and effectively together.more » « less
-
Our daily observations tell us that the delivery of social sentiments and emotions differs between strangers and romantic partners. This work explores how relationship status influences our delivery and perception of social touches and emotions, by evaluating the physics of contact interactions. In a study with human participants, strangers and romantically involved touchers delivered emotional messages to receivers’ forearms. Physical contact interactions were measured using a customized 3D tracking system. The results indicate that strangers and romantic receivers recognize emotional messages with similar accuracy, but with higher levels of valence and arousal between romantic partners. Further investigation into the contact interactions which underlie the higher levels of valence and arousal reveals that a toucher tunes their strategy with their romantic partner. For example, when stroking, romantic touchers use velocities preferential to C-tactile afferents, and maintain contact for longer durations with larger contact areas. Notwithstanding, while we show that relationship intimacy influences the deployment of touch strategies, such impact is relatively subtle compared to distinctions between gestures, emotional messages, and individual preferences.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
