An official website of the United States government
Abstract Properties of particulate-filled polymer matrix composites are highly dependent on the spatial position, orientation and assembly of the particles throughout the matrix. External fields such as electric and magnetic have been individually used to orient, position and assemble micro and nanoparticles in polymer solutions and their resulting material properties were investigated, but the combined effect of using more than one external field on the material properties has not been studied in detail. Applying different configurations of electric and magnetic fields on geometrically and magnetically anisotropic particulates can produce varying microarchitectures with a range of material properties. Experimentally and with simulations, we systematically probe the effect of combined electric and magnetic fields on the microstructure formation of geometrically and magnetically anisotropic barium hexaferrite (BHF) in polydimethylsiloxane (PDMS). The magnetic and dielectric properties resulting from different microstructures are characterized and microstructure-property relationships are analyzed. Our results demonstrate that a variety of microarchitectures can be produced using multi-field processing depending on the nature of the applied external field. For example, the application of an electric field creates macro-chains where the orientation of the BHF stacks inside the macro-chains is random. On the other hand, application of a magnetic field rotates the BHF stacks within the macro-chain in the direction dictated by the magnetic field. In simulations, the dielectrophoretic, magnetic, and viscous forces and torques acting on the particles show that particle anisotropies are central to the ability to control orientation along the orthogonal magnetic and geometric axes, mirroring experimental results. The authors refer to the ability to manipulate particle orientation along orthogonal axes as ‘orthogonal control’. Using this technique, not only are a variety of microstructures possible, but also a range of dielectric and magnetic properties can result. For example, for 1 vol% BHF-PDMS composites, the experimental dielectric permittivity is found to vary from 2.84 to 5.12 and the squareness ratio (remnant magnetization over saturation magnetization) is found to vary from 0.55 to 0.92 (from 0.52 to 0.99 in simulations) depending on the applied external stimuli. The ability to predict and produce a variety of microstructures with a range of properties from a single material set will be particularly beneficial for resin pool based additive manufacturing and 3D printing.
more »
« less
The Study of Particle-Particle Interaction and Assembly under the Influence of Dielectrophoretic Force Experienced between Carbon Microelectrodes
Electrokinetic microassembly is used to position microparts via dielectrophoresis and electro-osmosis. Present work studies experimental conditions for creating latex particle agglomerates such as “pearly chains”. The work discusses one of the approaches to lock particles in the position after the electric field is removed. Particle-to-particle interactions such as electro-rotation and formation of particle chains parallel and perpendicular to the field lines are explored.
more »
« less
- Award ID(s):
- 1661877
- PAR ID:
- 10313495
- Date Published:
- Journal Name:
- Proceedings of the World Congress on Micro and Nano Manufacturing 2018
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Nonlinear electrokinetic phenomena, where electrically driven fluid flows depend nonlinearly on the applied voltage, are commonly encountered in aqueous suspensions of colloidal particles. A prime example is the induced-charge electro-osmosis, driven by an electric field acting on diffuse charge induced near a polarizable surface. Nonlinear electrohydrodynamic flows also occur in non-polar fluids, driven by the electric field acting on space charge induced by conductivity gradients. Here, we analyse the flows about a charge-neutral spherical solid particle in an applied uniform electric field that arise from conductivity dependence on local field intensity. The flow pattern varies with particle conductivity: while the flow about a conducting particle has a quadrupolar pattern similar to induced-charge electro-osmosis, albeit with opposite direction, the flow about an insulating particle has a more complex structure. We find that this flow induces a force on a particle near an electrode that varies non-trivially with particle conductivity: while it is repulsive for perfectly insulating particles and particles more conductive than the suspending medium, there exists a range of particle conductivities where the force is attractive. The force decays as the inverse square of the distance to the electrode and thus can dominate the dielectrophoretic attraction due to the image dipole, which falls off with the fourth power with the distance. This electrohydrodynamic lift opens new possibilities for colloidal manipulation and driven assembly by electric fields.more » « less
-
There are driving applications for large populations of tiny robots in robotics, biology, and chemistry. These robots often lack onboard computation, actuation, and communication. Instead, these “robots” are particles carrying some payload and the particle swarm is controlled by a shared control input such as a uniform magnetic gradient or electric field. In previous works, we showed that the 2D position of each particle in such a swarm is controllable if the workspace contains a single obstacle the size of one particle. Requiring a small, rigid obstacle suspended in the middle of the workspace is a strong constraint, especially in 3D. This paper relaxes that constraint, and provides position control algorithms that only require non-slip wall contact in 2D. Both in vivo and artificial environments often have such boundaries. We assume that particles in contact with the boundaries have zero velocity if the shared control input pushes the particle into the wall. This paper provides a shortest-path algorithm for positioning a two-particle swarm, and a generalization to positioning an n-particle swarm. Results are validated with simulations and a hardware demonstration.more » « less
-
Hypothesis The interaction of active particles with walls can explain discrepancies between experiments and theory derived for particles in the bulk. For an electric field driven metallodielectric Janus particle (JP) adjacent to an electrode, interaction between the asymmetric particle and the partially screened electrode yields a net electrostatic force – termed self-dielectrophoresis (sDEP) - that competes with induced-charge electrophoresis (ICEP) to reverse particle direction. Experiments The potential contribution of hydrodynamic flow to the reversal is evaluated by visualizing flow around a translating particle via micro-particle image velocimetry and chemically suppressing ICEP with poly(l-lysine)-g-poly(ethylene glycol) (PLL-PEG). Mobility of Polystyrene-Gold JPs is measured in KCl electrolytes of varying concentration and with a capacitive SiO2 coating at the metallic JP surface or electrode. Results are compared with theory and numerical simulations accounting for electrode screening. Findings PLL-PEG predominantly suppresses low-frequency mobility where propulsive electro-hydrodynamic jetting is observed; supporting the hypothesis of an electrostatic driving force at high frequencies. Simulations and theory show the magnitude, direction and frequency dispersion of JP mobility are obtained by superposition of ICEP and sDEP using the JP height and capacitance as fitting parameters. Wall proximity enhances ICEP and sDEP and manifests a secondary ICEP charge relaxation time dominating in the contact limit.more » « less
-
Microfluidic manipulation of particles usually relies on their cross-stream migration. A center- or wall-directed motion has been reported for particles leading or lagging the Poiseuille flow of viscoelastic polyethylene oxide (PEO) solution via positive or negative electrophoresis. Such electro-elastic migration is exactly opposite to the electro-inertial migration of particles in a Newtonian fluid flow. We demonstrate here through the top- and side-view imaging that the leading and lagging particles in the electro-hydrodynamic flow of PEO solution migrate toward the centerline and corners of a rectangular microchannel, respectively. Each of these electro-elastic particle migrations is reduced in the PEO solution with shorter polymers though neither of them exhibits a strong dependence on the particle size. Both phenomena can be reasonably explained by the theory in terms of the ratios of the forces involved in the process. Decreasing the PEO concentration causes the particle migration to shift from the viscoelastic mode to the Newtonian mode, for which the magnitude of the imposed electric field is found to play an important role.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.3850/978-981-11-2728-1_52
