An official website of the United States government
Graphene is a promising materials platform for metasurface flat optics at terahertz wavelengths, with the important advantage of active tunability. Here we review recent work aimed at the development of tunable graphene metasurfaces for THz wavefront shaping (including beam-steering metamirrors and metalenses) and light emission. Various design strategies for the constituent meta-units are presented, ranging from metallic phase-shifting elements combined with a nearby graphene sheet for active tuning to graphene plasmonic resonators providing the required phase control or radiation mechanism. The key challenge in the development of these devices, related to the limited radiative coupling of graphene plasmonic excitations, is discussed in detail together with recently proposed solutions. The resulting metasurface technology can be expected to have a far-reaching impact on a wide range of device applications for THz imaging, sensing, and future wireless communications.
more »
« less
Graphene-Based Environmental Sensors: Electrical and Optical Devices
In this review paper, we summarized the recent progress of using graphene as a sensing platform for environmental applications. Especially, we highlight the electrical and optical sensing devices developed based on graphene and its derivatives. We discussed the role of graphene in these devices, the sensing mechanisms, and the advantages and disadvantages of specific devices. The approaches to improve the sensitivity and selectivity are also discussed.
more »
« less
- Award ID(s):
- 1945364
- PAR ID:
- 10314321
- Date Published:
- Journal Name:
- Molecules
- Volume:
- 26
- Issue:
- 8
- ISSN:
- 1420-3049
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We characterize a novel fabrication procedure for the implementation of large arrays of subwavelength graphene devices. With the proposed process, we can now integrate graphene layers on large substrate areas (> 4 cm2) and implement thousands of devices with high-yield (> 90 %). Examples of such systems include broadband THz phased arrays and metasurfaces that can be used in THz imaging and sensing. Current nano-fabrication processes hinder the proliferation of large arrays due to the fragile nature of graphene. Conversely, we use titanium sacrificial layers to protect the delicate graphene throughout the fabrication process. Thus, we minimize graphene delamination and enable multiple devices on large-area substrates with high-yield. In addition, we present a series of on-wafer measurement results in the 220-330 GHz band, verifying the robustness of our fabrication process.more » « less
-
Graphene has transformed the fields of plasmonics and photonics, and become an indispensable component for devices operating in the terahertz to mid-infrared range. Here, for instance, graphene surface plasmons can be excited, and their extreme interfacial confinement makes them vastly effective for sensing and detection. The rapid, robust, and accurate numerical simulation of optical devices featuring graphene is of paramount importance and many groups appeal to Black-Box Finite Element solvers. While accurate, these are quite computationally expensive for problems with simplifying geometrical features such as multiple homogeneous layers, which can be recast in terms of interfacial (rather than volumetric) unknowns. In either case, an important modeling consideration is whether to treat the graphene as a material of small (but non-zero) thickness with an effective permittivity, or as a vanishingly thin sheet of current with an effective conductivity. In this contribution we ponder the correct relationship between the effective conductivity and permittivity of graphene, and propose a new relation which is based upon a concrete mathematical calculation that appears to be missing in the literature. We then test our new model both in the case in which the interface deformation is non-trivial, and when there are two layers of graphene with non-flat interfacial deformation.more » « less
-
Abstract Universal platforms for biomolecular analysis using label‐free sensing modalities can address important diagnostic challenges. Electrical field effect‐sensors are an important class of devices that can enable point‐of‐care sensing by probing the charge in the biological entities. Use of crumpled graphene for this application is especially promising. It is previously reported that the limit of detection (LoD) on electrical field effect‐based sensors using DNA molecules on the crumpled graphene FET (field‐effect transistor) platform. Here, the crumpled graphene FET‐based biosensing of important biomarkers including small molecules and proteins is reported. The performance of devices is systematically evaluated and optimized by studying the effect of the crumpling ratio on electrical double layer (EDL) formation and bandgap opening on the graphene. It is also shown that a small and electroneutral molecule dopamine can be captured by an aptamer and its conformation change induced electrical signal changes. Three kinds of proteins were captured with specific antibodies including interleukin‐6 (IL‐6) and two viral proteins. All tested biomarkers are detectable with the highest sensitivity reported on the electrical platform. Significantly, two COVID‐19 related proteins, nucleocapsid (N‐) and spike (S‐) proteins antigens are successfully detected with extremely low LoDs. This electrical antigen tests can contribute to the challenge of rapid, point‐of‐care diagnostics.more » « less
-
Abstract Complex graphene electrode fabrication protocols including conventional chemical vapor deposition and graphene transfer techniques as well as more recent solution‐phase printing and postprint annealing methods have hindered the wide‐scale implementation of electrochemical devices including solid‐state ion‐selective electrodes (ISEs). Herein, a facile graphene ISE fabrication technique that utilizes laser induced graphene (LIG), formed by converting polyimide into graphene by a CO2laser and functionalization with ammonium ion (NH4+) and potassium ion (K+) ion‐selective membranes, is demonstrated. The electrochemical LIG ISEs exhibit a wide sensing range (0.1 × 10−3–150 × 10−3mfor NH4+and 0.3 × 10−3–150 × 10−3mfor K+) with high stability (minimal drop in signal after 3 months of storage) across a wide pH range (3.5–9.0). The LIG ISEs are also able to monitor the concentrations of NH4+and K+in urine samples (29–51% and 17–61% increase for the younger and older patient; respectively, after dehydration induction), which correlate well with conventional hydration status measurements. Hence, these results demonstrate a facile method to perform in‐field ion sensing and are the first steps in creating a protocol for quantifying hydration levels through urine testing in human subjects.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/molecules26082165
