An official website of the United States government
Understanding structure–mechanochemical reactivity relationships is important for informing the rational design of new stimuli-responsive polymers. To this end, establishing accurate reaction kinetics for mechanophore activation is a key objective. Here, we validate an initial rates method that enables the accurate and rapid determination of rate constants for ultrasound-induced mechanochemical transformations. Experimental reaction profiles are well-aligned with theoretical models, which support that the initial rates method effectively deconvolutes the kinetics of specific mechanophore activation from the competitive process of nonspecific chain scission.
more »
« less
Ultrasound-assisted dopamine polymerization: rapid and oxidizing agent-free polydopamine coatings on membrane surfaces
Herein, we report a controllable pathway to accelerate the polymerization kinetics of dopamine using ultrasound as a trigger. The use of ultrasound was demonstrated to dramatically accelerate the slow liquid phase reaction kinetics and increase the deposition rate of the polydopamine coating on the surface of polymeric membranes.
more »
« less
- Award ID(s):
- 1930610
- PAR ID:
- 10315354
- Date Published:
- Journal Name:
- Chemical Communications
- Volume:
- 57
- Issue:
- 100
- ISSN:
- 1359-7345
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The live visualization with fast kinetics of the interaction between cells has been long term challenges because of the lack of efficient stimulation methods. We propose an approach to achieve single cell resolution stimulation and FRET-base calcium live cell imaging to visualize fast kinetics of calcium transport between physically connect neighboring cells. Chemical stimulation stimulates cells within a dish at the same time and is not suitable for the study of cell-cell interaction. We replaced chemical stimulation with ultrasound-based mechanical stimulation approach to provide precise spatiotemporal resolution. To achieve this, we integrated 3D translation stages and epi-fluorescence microscope and a developed 150 MHz high frequency ultrasound with f number of 1 and aperture size of 1 mm. The 150 MHz transducer can focus within 10 micrometers in diameter and directly stimulate cells by disturbing cell plasma membranes without microbubbles. High frequency stimulation was used to introduce calcium ions into cytoplasm of cells. Results demonstrate calcium transport between cells, visualized by FRET calcium biosensor after only one cell was stimulated by the developed high frequency ultrasonic transducer.more » « less
-
Abstract Ultrasound‐directed self‐assembly (DSA) utilizes the acoustic radiation force associated with a standing ultrasound wave field to organize particles dispersed in a fluid medium into specific patterns. State‐of‐the‐art ultrasound DSA methods use single‐frequency ultrasound wave fields, which only allow organizing particles into simple, periodic patterns, or require a large number of ultrasound transducers to assemble complex patterns. In contrast, this work introduces multi‐frequency ultrasound wave fields to organize particles into complex patterns. A method is theoretically derived to determine the operating parameters (frequency, amplitude, phase) of any arrangement of ultrasound transducers, required to assemble spherical particles dispersed in a fluid medium into specific patterns, and experimentally validated for a system with two frequencies. The results show that multi‐frequency compared to single‐frequency ultrasound DSA enables the assembly of complex patterns of particles with substantially fewer ultrasound transducers. Additionally, the method does not incur a penalty in terms of accuracy, and it does not require custom hardware for each different pattern, thus offering reconfigurability, which contrasts, e.g., acoustic holography. Multi‐frequency ultrasound DSA can spur progress in a myriad of engineering applications, including the manufacturing of multi‐functional polymer matrix composite materials that derive their structural, electric, acoustic, or thermal properties from the spatial organization of particles in the matrix.more » « less
-
Long duration electricity storage (LDES) with 10+ hour cycle duration is an economically competitive option to accelerate the penetration of renewable energy into the utility market. Unfortunately, none of the available energy storage technologies can meet the LDES’ requirements for duration and cost. We here report a focused kinetic study on Fe-oxide reduction process, which is a key step for solid oxide iron-air battery; the latter has been recently demonstrated as a LDES compatible battery. The study clearly shows that Ir is an excellent catalyst to boost the sluggish Fe-oxide reduction kinetics.more » « less
-
Macroscopically homogeneous mixtures of p -nitroanisole ( p NA) and mesitylene (MES) can be selectively heated using microwave (MW) energy. The p NA solutes agglomerate into distinct phase domains on the attoliter-scale (1 aL = 10 −18 L), and these agglomerates can be MW-heated selectively to temperatures that far exceed the boiling point of the surrounding MES solvent. Here, a 1 : 20 mixture of p NA : MES is used as a mixed solvent for aryl Claisen rearrangement of allyl naphthyl ether (ANE). ANE itself does not heat effectively in the MW, but selective MW heating of p NA allows for transfer of thermal energy to ANE to accelerate rearrangement kinetics above what would be expected based on Arrhenius kinetics and the measured bulk solution temperature. This focused study builds on prior work and highlights 1 : 20 p NA : MES as a mixed solvent system to consider for strategically exploiting MW-specific thermal effects.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D1CC05960B
