Artificial smart skins that integrate sensing and adaptiveness present a novel platform in wearable electronics on epidermis or next‐generation robotics. Herein, a highly sensitive capacitive touch senor based on a self‐conformable bi‐stable electroactive polymer (BSEP) is developed. The device combines the properties of conformable polymers and touch sensors, which grants the sensor the ability to conform to the shape of various surfaces and in different working conditions. A spray‐coated silver nanowire (AgNW) is selected as the sensor electrode for high‐resolution patterning. The unique antenna‐shaped electrode pattern results in a capacitance change of 31% when in contact with ground at a baseline of 0.13 pF. The BSEP provides stiffness tunability via an embedded compliant heater. The heater combines interdigitated silver with carbon nanotubes delivering uniform and highly efficient heating to create a tunable device with stiffness between 100s of MPa and tens of kPa, providing a large working flexibility. The efficient resistive heater provides uniform and stable heating over an area of 40 by 40 mm with a rate of 48 °C min−1at an input voltage as low as 7 V. This research merges intelligent polymeric systems and thin film electronics advancing conformable, skin‐like functional electronics.
Wearable piezoresistive sensors are being developed as electronic skins (E‐skin) for broad applications in human physiological monitoring and soft robotics. Tactile sensors with sufficient sensitivities, durability, and large dynamic ranges are required to replicate this critical component of the somatosensory system. Multiple micro/nanostructures, materials, and sensing modalities have been reported to address this need. However, a trade‐off arises between device performance and device complexity. Inspired by the microstructure of the spinosum at the dermo epidermal junction in skin, a low‐cost, scalable, and high‐performance piezoresistive sensor is developed with high sensitivity (0.144 kPa‐1), extensive sensing range ( 0.1–15 kPa), fast response time (less than 150 ms), and excellent long‐term stability (over 1000 cycles). Furthermore, the piezoresistive functionality of the device is realized via a flexible transparent electrode (FTE) using a highly stable reduced graphene oxide self‐wrapped copper nanowire network. The developed nanowire‐based spinosum microstructured FTEs are amenable to wearable electronics applications.
more » « less- Award ID(s):
- 1654794
- NSF-PAR ID:
- 10361759
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small Methods
- Volume:
- 6
- Issue:
- 1
- ISSN:
- 2366-9608
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract Sustainably produced biomaterials can greatly improve the biocompatibility of wearable sensor technologies while reducing the energy and environmental impacts of materials fabrication and disposal. An electronic sensor device in which the sensing element is a thin (≈2 µm) film of electrically conductive protein nanowires harvested from the microbe
Geobacter sulfurreducens is developed. The sensor rapidly responds to changes in humidity with high selectivity and sensitivity. The sensor is integrated on a flexible substrate as a wearable device, enabling real‐time monitoring of physiological conditions such as respiration and skin hydration. Noncontact body tracking is demonstrated with an array of sensors that detect a humidity gradient at distance from the skin with high sensitivity. Humidity gradients induce directional charge transport in the protein nanowires films, enabling the production of a current signal without applying an external voltage bias for powerless sensing. These results demonstrate the considerable promise for developing protein nanowire‐based wearable sensor devices. -
more » « less
Abstract Compliant pressure sensors are a key technology for wearable electronics and haptic interfaces. Making transistors pressure‐sensitive provides an opportunity to combine sensing and matrix readout characteristics. However, there is typically a trade‐off in pressure sensitivity, complexity of fabrication, and mechanical resilience. To overcome these challenges, an all solution‐processed kirigami‐inspired stretchable organic thin film transistor (OTFT) based pressure sensor array is introduced. The OTFTs integrate several novel processing and design strategies that include electrohydrodynamic (EHD) jet‐printed Ag nanowire (NW) electrodes that are partially embedded in a polyimide (PI) matrix. The EHD printing provides fine pattern control and the NW/PI composite improves mechanical stability. The OTFTs are made pressure sensitive by employing a porous styrene‐ethylene‐butylene‐styrene gate dielectric achieved using a breath figure method. The pore density can be controlled to achieve tunable pressure sensitivity. The OTFTs are shown to maintain performance under a small bending radius (1 mm) and can sense applied pressure from 0.75 to 25 kPa. Finally, a cut pattern is introduced into the substrate that imparts stretchability while maintaining pressure sensor functionality. The integration of the design features and processing methods introduced in this work enables mechanically resilient stretchable pressure sensors.
-
more » « less
Abstract Progress in soft and stretchable electronics depends on energy sources that are mechanically compliant, elastically deformable, and renewable. Energy harvesting using triboelectric nanogenerators (TENGs) made from soft materials provides a promising approach to address this critical need. Here, an elastomeric composite is introduced with sedimented liquid metal (LM) droplets for TENG‐based energy harvesting that relies on assembly of the LM to form phase‐separated conductive and insulating regions. The sedimented LM elastomer TENG (SLM‐TENG) exhibits ultrahigh stretchability (strain limit
> 500% strain), skin‐like compliance (modulus< 60 kPa), reliable device stability (> 10 000 cycles), and appreciable electrical output performance (max peak power density= 1 mW cm−2). SLM‐TENGs can be integrated with highly elastic stretchable fabrics, thereby enabling broad integration with wearable electronics. A stretchable and wearable SLM‐TENG is demonstrated that harvests energy from human motion through a patch attached to the knee or integrated into exercise clothing. This body‐mounted TENG device can generate enough electricity to fully power a wearable computing device (hygro‐thermometer with digital display) after 2.2 min of running on a treadmill. -
more » « less
Abstract Hotter summers caused by global warming and increased workload and duration are endangering the health of farmworkers, a high‐risk population for heat‐related illness (HRI), and deaths. Although prior studies using wearable sensors show the feasibility of employing field‐collected data for HRI monitoring, existing devices still have limitations, such as data loss from motion artifacts, device discomfort from rigid electronics, difficulties with administering ingestible sensors, and low temporal resolution. Here, this paper introduces a wireless, wearable bioelectronic system with functionalities for continuous monitoring of skin temperature, electrocardiograms (ECG), heart rates (HR), and activities, configured in a single integrated package. Advanced nanomanufacturing based on laser machining allows rapid device fabrication and direct incorporation of sensors with a highly breathable substrate, allowing for managing excessive sweating and multimodal stresses. To validate the device's performance in agricultural settings, the device is applied to multiple farmworkers at various operations, including fernery, nursery, and crop. The accurate data recording, including high‐fidelity ECG (signal‐to‐noise ratio: >20 dB), accurate HR (
r = 0.89,r 2= 0.65 in linear correlation), and reliable temperature/activity, confirms the device's capability for multiparameter health monitoring of farmworkers.
