skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Linear versus branched: flow of a wormlike micellar fluid past a falling sphere
We report experiments on flow of wormlike micellar solutions past a falling sphere. By increasing the salt-to-surfactant concentration ratio, and beyond a viscosity peak, wormlike micelles experience a transition from linear to branched microstructure. Two viscoelastic wormlike micelles with salt to surfactant concentrations on each side of the viscosity peak are considered. Our results indicate three significant differences in flows of branched and linear micelles. First, while the sphere drag correction factor rapidly decreases upon increasing Weissenberg number in linear micelles, it shows an apparent local maximum at Wi ≈ 3 in branched micelles. Second, despite its high viscoelasticity, the time-averaged flow of branched micelles around the falling sphere exhibits a fore-and-aft symmetry, while a strong negative wake is observed in linear micelles at relatively weaker flows. Third, branched micelles exhibit a stronger flow-induced birefringence than linear micelles in an otherwise identical condition. Our hypothesis is that subject to strong flows around the falling sphere, branched micelles can relax much more efficiently than linear wormlike micelles through sliding of the branched junctions. This additional stress relaxation mechanism may facilitate micellar orientation, produce a marginal sphere drag reduction and a Newtonian-like flow profile around the falling sphere. Finally, unsteady flow is observed in both linear and branched micellar solutions beyond some critical thresholds of the extensional Weissenber number. Our results corroborate a recently proposed criterion for onset of instability in flow of wormlike micelles past a falling sphere, thereby, suggesting that micellar branching does not affect the mechanism of flow instability.  more » « less
Award ID(s):
1942150
PAR ID:
10319275
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Soft Matter
Volume:
17
Issue:
16
ISSN:
1744-683X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Liétor-Santos, J-J (Ed.)
    The effect of branches on the linear rheology of entangled wormlike micelle solutions is modeled by tracking the diffusion of micellar material through branch points. The model is equivalent to a Kirchhoff circuit model with the sliding of an entangled branch along an entanglement tube due to the constrained diffusion of micellar material analogous to the flux of current in the Kirchhoff circuit model. When combined with our previous mesoscopic pointer algorithm for linear micelles that can both break and fuse, the model adds a branch sprouting process and therefore enables simulation of the dynamics of structural change and stress relaxation in ensembles of micelle clusters of different topologies. Applying this new model to study the relationships between fluid rheology and microstructure of micelles, our results show that branches change the scaling law exponents for viscosity versus micelle strand length. This contrasts with the long-standing hypothesis that branches affect viscosity and relaxation in the same way that micelle ends do. The model also suggests a process for inferring branching density from salt-dependent linear rheology. This is exemplified by mixed surfactant solutions over a range of salt concentrations with flow properties measured using both mechanical rheometry and diffusing wave spectroscopy (DWS). By elucidating the connection between the branching characteristics, such as strand length and branching density, with the nonmonotonic variation of solution viscosity, the above model provides a powerful new tool to help extract branching information from rheology. 
    more » « less
  2. Structure-property-processing relationships for model lamellar structured 70 wt.% SLEnS solutions were developed with a combination of rheometry, cross-polarized optical microscopy, calorimetry, small angle X-ray scattering, and rheo-ultrasonic speckle velocimetry. Additives were utilized to maintain high surfactant activity, reduce bulk viscosity and simplify processing. While the bulk flow behavior of neat SLEnS solutions was similar, the effect of some additives was sensitive to the degree of ethoxylation. Linear-chain alcohols (C2-C5) partitioned into inter-bilayer water layers, dehydrating surfactant headgroups and inducing lamellar-to-micellar transitions. Short-chain polyols formed higher-viscosity hexagonal and mixed phases at room temperature through hydrogen bonding with surfactant headgroups. Heating beyond the upper temperature limit weakened these interactions, resulting in low-viscosity solutions. Within the lamellar phase, common salt promoted shear-induced crystallization above the equilibrium temperature range. Propylene glycol suppressed shear-induced crystallization and promoted wall-slip under shear, forming lubrication layers near the wall. These strategies offer practical levers to tune rheology and microstructure of concentrated surfactant systems, with the datasets developed providing a foundation for future modeling. Outcomes from this study inform the sustainable design and efficient processing of concentrated surfactant-based products. 
    more » « less
  3. We investigate the flow evolution of a linear and a branched wormlike micellar solution with matched rheology in a Taylor–Couette (TC) cell using a combination of particle-tracking velocimetry, birefringence, and turbidity measurements. Both solutions exhibit a stress plateau within a range of shear rates. Under startup of a steady shear rate flow within the stress plateau, both linear and branched samples exhibit strong transient shear thinning flow profiles. However, while the flow of the linear solution evolves to a banded structure at longer times, the flow of the branched solution transitions to a curved velocity profile with no evidence of shear banding. Flow-induced birefringence measurements indicate transient birefringence banding with strong micellar alignment in the high shear band for the linear solution. The transient flow-induced birefringence is stronger for the branched system at an otherwise identical Wi. At longer times, the birefringence bands are replaced by a chaotic flow reminiscent of elastic instabilities. Visualization of the flow-induced turbidity in the velocity gradient-vorticity plane reveals quasi-steady banding with a turbidity contrast between high and low shear bands in the linear solution. However, the turbidity evolves uniformly within the gap of the TC cell for the branched solution, corroborating the non-banded quasi-steady velocimetry results. Finally, we show that while elastic instabilities in the linear solution emerge in the high shear band, the flow of branched solution at high Wi becomes unstable due to end effects, with growing end regions that ultimately span the entire axial length of the TC cell. 
    more » « less
  4. Abstract Hydrophobic hydration, whereby water spontaneously structures around hydrophobic and amphiphilic molecules, plays a key role in the process of surfactant micelle formation and micellar oil solubilization. Using vibrational Raman multivariate curve resolution spectroscopy, we characterized changes in the hydrophobic hydration occurring within nonionic alkylphenol ethoxylate surfactant Tergitol NP‐12 micelles as a function of oil solubilization. We report trends in the changes of hydrophobic hydration depending on the chain length of the oil as well as the presence of a halogen atom in the oil chemical structure. Changes in hydrophobic hydration directly correlate to changes in the physical properties of the micellar solution, including cloud point and micelle hydrodynamic diameter. We compare hydrophobic hydration of Tergitol NP‐12 to nonionic linear alkyl ethoxylate surfactant Makon TD‐12 and ionic sodium dodecyl sulfate and observe similar trends; the molecular structure of the oil has the largest impact on the hydrophobic hydration. We believe these studies contribute to a fundamental understanding of the importance of hydrophobic hydration in surfactant and oil aggregates, especially as it relates to micellar oil solubilization, and provide insight into how the molecular solubilizate can impact micellar structure, size, and stability. 
    more » « less
  5. We investigate the effects of micellar entanglement number on the kinetics of shear banding flow formation in a Taylor–Couette flow. Three sets of wormlike micellar solutions, each set with a similar fluid elasticity and zero-shear-rate viscosity, but with varying entanglement densities, are studied under the startup of steady shear. Our experiments indicate that in the set with low fluid elasticity, the transient shear banding flow is characterized by the formation of a transient flow reversal in a range of entanglement densities. Outside of this range, the transient flow reversal is not observed. For the sets of medium and high elasticities, the transient flow reversals exist for relatively small entanglement densities and disappear for large entanglement densities. Our analysis shows that wall slip and elastic instabilities do not affect the transient flow feature. We identify a correlation between micellar entanglement number, the width of the stress plateau, and the extent of the transient flow reversal. As the micellar entanglement number increases, the width of the stress plateau first increases; then, at a higher micellar entanglement number, the plateau width decreases. Therefore, we hypothesize that the transient flow reversal is connected to the micellar entanglement number through the width of the stress plateau. 
    more » « less