An official website of the United States government
Abstract Topographic differencing measures landscape change by comparing multitemporal high-resolution topography data sets. Here, we focused on two types of topographic differencing: (1) Vertical differencing is the subtraction of digital elevation models (DEMs) that span an event of interest. (2) Three-dimensional (3-D) differencing measures surface change by registering point clouds with a rigid deformation. We recently released topographic differencing in OpenTopography where users perform on-demand vertical and 3-D differencing via an online interface. OpenTopography is a U.S. National Science Foundation–funded facility that provides access to topographic data and processing tools. While topographic differencing has been applied in numerous research studies, the lack of standardization, particularly of 3-D differencing, requires the customization of processing for individual data sets and hinders the community’s ability to efficiently perform differencing on the growing archive of topography data. Our paper focuses on streamlined techniques with which to efficiently difference data sets with varying spatial resolution and sensor type (i.e., optical vs. light detection and ranging [lidar]) and over variable landscapes. To optimize on-demand differencing, we considered algorithm choice and displacement resolution. The optimal resolution is controlled by point density, landscape characteristics (e.g., leaf-on vs. leaf-off), and data set quality. We provide processing options derived from metadata that allow users to produce optimal high-quality results, while experienced users can fine tune the parameters to suit their needs. We anticipate that the differencing tool will expand access to this state-of-the-art technology, will be a valuable educational tool, and will serve as a template for differencing the growing number of multitemporal topography data sets.
more »
« less
Statewide USGS 3DEP Lidar Topographic Differencing Applied to Indiana, USA
Differencing multi-temporal topographic data (radar, lidar, or photogrammetrically derived point clouds or digital elevation models—DEMs) measures landscape change, with broad applications for scientific research, hazard management, industry, and urban planning. The United States Geological Survey’s 3D Elevation Program (3DEP) is an ambitious effort to collect light detection and ranging (lidar) topography over the United States’ lower 48 and Interferometric Synthetic Aperture Radar (IfSAR) in Alaska by 2023. The datasets collected through this program present an important opportunity to characterize topography and topographic change at regional and national scales. We present Indiana statewide topographic differencing results produced from the 2011–2013 and 2016–2020 lidar collections. We discuss the insights, challenges, and lessons learned from conducting large-scale differencing. Challenges include: (1) designing and implementing an automated differencing workflow over 94,000 km2 of high-resolution topography data, (2) ensuring sufficient computing resources, and (3) managing the analysis and visualization of the multiple terabytes of data. We highlight observations including infrastructure development, vegetation growth, and landscape change driven by agricultural practices, fluvial processes, and natural resource extraction. With 3DEP and the U.S. Interagency Elevation Inventory data, at least 37% of the Contiguous 48 U.S. states are already covered by repeat, openly available, high-resolution topography datasets, making topographic differencing possible.
more »
« less
- Award ID(s):
- 1948997
- PAR ID:
- 10323227
- Date Published:
- Journal Name:
- Remote Sensing
- Volume:
- 14
- Issue:
- 4
- ISSN:
- 2072-4292
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Imaging tectonic creep along active faults is critical for measuring strain accumulation and ultimately understanding the physical processes that guide creep and the potential for seismicity. We image tectonic deformation along the central creeping section of the San Andreas Fault at the Dry Lake Valley paleoseismic site (36.468°N, 121.055°W) using three data sets with varying spatial and temporal scales: (1) an Interferometric Synthetic Aperture Radar (InSAR) velocity field with an ~100‐km footprint produced from Sentinel‐1 satellite imagery, (2) light detection and ranging (lidar) and structure‐from‐motion 3‐D topographic differencing that resolves a decade of deformation over a 1‐km aperture, and (3) surface fractures that formed over the 3‐ to 4‐m wide fault zone during a drought from late 2012 to 2014. The InSAR velocity map shows that shallow deformation is localized to the San Andreas Fault. We demonstrate a novel approach for differencing airborne lidar and structure‐from‐motion topography that facilitates resolving deformation along and adjacent to the San Andreas Fault. The 40‐m resolution topographic differencing resolves a 2.5 ± 0.2 cm/yr slip rate localized to the fault. The opening‐mode fractures accommodate cm/yr of fault slip. A 90% ± 30% of the 1‐km aperture deformation is accommodated over the several meter‐wide surface trace of the San Andreas Fault. The extension direction inferred from the opening‐mode fractures and topographic differencing is 40°–48° from the local trend of the San Andreas Fault. The localization of deformation likely reflects the well‐oriented and mature fault.more » « less
-
null (Ed.)Abstract This study presents an investigation into relationships among topographic elevation, surface land cover, and tornado intensity using rapid scan, mobile Doppler radar observations of four tornadoes from the U.S. Central Plains. High spatiotemporal resolution observations of tornadic vortex signatures from the radar’s lowest elevation angle data (in most cases ranging from ~100 to 350 m above ground level) are coupled with digital elevation model (DEM) and 2011 National Land Cover Database (NLCD) data using a geographic information system (GIS). The relationships between 1) tornado intensity and topographic elevation or surface roughness and 2) changes in tornado intensity and changes in topographic elevation or surface roughness are investigated qualitatively, and statistical relationships are quantified and analyzed using a bootstrap permutation method for individual case studies and all cases collectively. Results suggest that there are statistically significant relationships for individual cases, but the relationships defy generalization and are different on a case-by-case basis, which may imply that they are coincidental, indicating a null correlation.more » « less
-
Coastal populations are facing increasing environmental stress from coastal hazards including sea level rise, increasing tidal ranges, and storm surges from hurricanes. The East and Gulf Coasts of the United States (U.S.) are projected to face high rates of sea level rise and include many of the U.S.’s largest urban populations. This study proposes modelling land-use change and coastal change between 1996-2019 to project the impacts of intensifying coastal hazards on the U.S. Gulf and East Coast populations and to estimate how coastal populations are growing or retreating from high-risk areas. The primary objective is to develop a multifaceted spatial-temporal (MuST) framework to model coastal change through land-use projections and thorough analysis of the indicators of coastal urban growth or retreat. While urban growth models exist, one that presents an interdisciplinary evaluation of potential growth and retreat due to geographic factors and coastal hazards has not been released. This study proposes modelling urban growth using geospatial metrics including topographic slope, topographic elevation, distance to existing urban areas, distance to existing roads, and distance to the coast. The model will also use historic hurricane data, including storm track and footprint for named storms between 1996-2019 and the associated flood claims data from Federal Emergency Management Agency (FEMA), to account for existing impacts from coastal storms. Additionally, climate change data including sea level rise projections and future tidal ranges will be incorporated to project the impacts of future coastal hazards on urban expansion over the next 30 years (2020-2050). The basis of the urban growth model compares land-use change between 1996-2019 to complete a geospatial analysis of both the areas shifting from rural (agricultural, forest, wetlands) to urban, indicating growth and population data from 2000-2020, to evaluate coastal retreat or abandonment over the next 30 years.more » « less
-
Abstract Bedrock river width is an essential geometric parameter relevant to understanding flood hazards and gauging station rating curves, and is critical to stream power incision models and many other landscape evolution models. Obtaining bedrock river width measurements, however, typically requires extensive field campaigns that take place in rugged and steep topography where river access is often physically challenging. Although prior work has turned to measuring channel width from satellite imagery, these data present a snapshot in time, are typically limited to rivers ≥ 10–30 m wide due to the image resolution, and are physically restricted to areas devoid of vegetation. For these reasons, we are generally data limited, and the factors impacting bedrock channel width remain poorly understood. Due to these limitations, researchers often turn to assumptions of width‐scaling relationships with drainage area or discharge to estimate bedrock channel width. Here we present a new method of obtaining bedrock channel width at a desired river discharge through the incorporation of a high‐resolution bare‐earth digital elevation model (DEM) using MATLAB Topotoolbox and the HEC‐RAS river analysis system. We validate this method by comparing modeled results to US Geological Survey (USGS) field measurements at existing gauging stations, as well as field channel measurements. We show that this method can capture general characteristics of discharge rating curves and predict field‐measured channel widths within uncertainty. As high‐resolution DEMs become more available across the United States through the USGS three‐dimensional elevation program (3DEP), the future utility of this method is notable. Through developing and validating a streamlined, open‐source, and freely available workflow of channel width extraction, we hope this method can be applied to future research to improve the quantity of channel width measurements and improve our understanding of bedrock channels.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/rs14040847
