An official website of the United States government
Differencing multi-temporal topographic data (radar, lidar, or photogrammetrically derived point clouds or digital elevation models—DEMs) measures landscape change, with broad applications for scientific research, hazard management, industry, and urban planning. The United States Geological Survey’s 3D Elevation Program (3DEP) is an ambitious effort to collect light detection and ranging (lidar) topography over the United States’ lower 48 and Interferometric Synthetic Aperture Radar (IfSAR) in Alaska by 2023. The datasets collected through this program present an important opportunity to characterize topography and topographic change at regional and national scales. We present Indiana statewide topographic differencing results produced from the 2011–2013 and 2016–2020 lidar collections. We discuss the insights, challenges, and lessons learned from conducting large-scale differencing. Challenges include: (1) designing and implementing an automated differencing workflow over 94,000 km2 of high-resolution topography data, (2) ensuring sufficient computing resources, and (3) managing the analysis and visualization of the multiple terabytes of data. We highlight observations including infrastructure development, vegetation growth, and landscape change driven by agricultural practices, fluvial processes, and natural resource extraction. With 3DEP and the U.S. Interagency Elevation Inventory data, at least 37% of the Contiguous 48 U.S. states are already covered by repeat, openly available, high-resolution topography datasets, making topographic differencing possible.
more »
« less
Measuring change at Earth’s surface: On-demand vertical and three-dimensional topographic differencing implemented in OpenTopography
Abstract Topographic differencing measures landscape change by comparing multitemporal high-resolution topography data sets. Here, we focused on two types of topographic differencing: (1) Vertical differencing is the subtraction of digital elevation models (DEMs) that span an event of interest. (2) Three-dimensional (3-D) differencing measures surface change by registering point clouds with a rigid deformation. We recently released topographic differencing in OpenTopography where users perform on-demand vertical and 3-D differencing via an online interface. OpenTopography is a U.S. National Science Foundation–funded facility that provides access to topographic data and processing tools. While topographic differencing has been applied in numerous research studies, the lack of standardization, particularly of 3-D differencing, requires the customization of processing for individual data sets and hinders the community’s ability to efficiently perform differencing on the growing archive of topography data. Our paper focuses on streamlined techniques with which to efficiently difference data sets with varying spatial resolution and sensor type (i.e., optical vs. light detection and ranging [lidar]) and over variable landscapes. To optimize on-demand differencing, we considered algorithm choice and displacement resolution. The optimal resolution is controlled by point density, landscape characteristics (e.g., leaf-on vs. leaf-off), and data set quality. We provide processing options derived from metadata that allow users to produce optimal high-quality results, while experienced users can fine tune the parameters to suit their needs. We anticipate that the differencing tool will expand access to this state-of-the-art technology, will be a valuable educational tool, and will serve as a template for differencing the growing number of multitemporal topography data sets.
more »
« less
- Award ID(s):
- 1948997
- PAR ID:
- 10323228
- Date Published:
- Journal Name:
- Geosphere
- Volume:
- 17
- Issue:
- 4
- ISSN:
- 1553-040X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Imaging tectonic creep along active faults is critical for measuring strain accumulation and ultimately understanding the physical processes that guide creep and the potential for seismicity. We image tectonic deformation along the central creeping section of the San Andreas Fault at the Dry Lake Valley paleoseismic site (36.468°N, 121.055°W) using three data sets with varying spatial and temporal scales: (1) an Interferometric Synthetic Aperture Radar (InSAR) velocity field with an ~100‐km footprint produced from Sentinel‐1 satellite imagery, (2) light detection and ranging (lidar) and structure‐from‐motion 3‐D topographic differencing that resolves a decade of deformation over a 1‐km aperture, and (3) surface fractures that formed over the 3‐ to 4‐m wide fault zone during a drought from late 2012 to 2014. The InSAR velocity map shows that shallow deformation is localized to the San Andreas Fault. We demonstrate a novel approach for differencing airborne lidar and structure‐from‐motion topography that facilitates resolving deformation along and adjacent to the San Andreas Fault. The 40‐m resolution topographic differencing resolves a 2.5 ± 0.2 cm/yr slip rate localized to the fault. The opening‐mode fractures accommodate cm/yr of fault slip. A 90% ± 30% of the 1‐km aperture deformation is accommodated over the several meter‐wide surface trace of the San Andreas Fault. The extension direction inferred from the opening‐mode fractures and topographic differencing is 40°–48° from the local trend of the San Andreas Fault. The localization of deformation likely reflects the well‐oriented and mature fault.more » « less
-
For the last seven years, PlanetScope satellites have started near-daily imaging of parts of the Earth’s surface, making high-density multitemporal, multispectral, 3-m pixel imagery accessible to researchers. Multitemporal satellite data enables landscape archaeologists to examine changes in environmental conditions at time scales ranging from daily to decadal. This kind of temporal resolution can accentuate landscape features on the ground by de-emphasizing non-permanent signatures caused by seasonal or even daily changes in vegetation. We argue that the availability of high spatial and temporal resolution multispectral imagery from Planet Inc. will enable new approaches to studying archaeological visibility in landscapes. While palimpsests are discrete overlapping layers of material accumulation, multitemporal composites capture cyclical and seasonal time and can be used to interpret past landscape histories at multiple scales. To illustrate this perspective, we present three case studies using PlanetScope imagery in tropical environments on the Indian Ocean islands of Madagascar, Mauritius, and Zanzibar.more » « less
-
Abstract Understanding the interactions among agricultural processes, soil, and plants is necessary for optimizing crop yield and productivity. This study focuses on developing effective monitoring and analysis methodologies that estimate key soil and plant properties. These methodologies include data acquisition and processing approaches that use unmanned aerial vehicles (UAVs) and surface geophysical techniques. In particular, we applied these approaches to a soybean farm in Arkansas to characterize the soil–plant coupled spatial and temporal heterogeneity, as well as to identify key environmental factors that influence plant growth and yield. UAV-based multitemporal acquisition of high-resolution RGB (red–green–blue) imagery and direct measurements were used to monitor plant height and photosynthetic activity. We present an algorithm that efficiently exploits the high-resolution UAV images to estimate plant spatial abundance and plant vigor throughout the growing season. Such plant characterization is extremely important for the identification of anomalous areas, providing easily interpretable information that can be used to guide near-real-time farming decisions. Additionally, high-resolution multitemporal surface geophysical measurements of apparent soil electrical conductivity were used to estimate the spatial heterogeneity of soil texture. By integrating the multiscale multitype soil and plant datasets, we identified the spatiotemporal co-variance between soil properties and plant development and yield. Our novel approach for early season monitoring of plant spatial abundance identified areas of low productivity controlled by soil clay content, while temporal analysis of geophysical data showed the impact of soil moisture and irrigation practice (controlled by topography) on plant dynamics. Our study demonstrates the effective coupling of UAV data products with geophysical data to extract critical information for farm management.more » « less
-
Van Stan, John Toland (Ed.)Topography is commonly viewed as a passive backdrop on which vegetation grows. Yet, in certain circumstances, a bidirectional feedback may develop between the control of topography and the spatial distribution of vegetation and landform development, because vegetation modulates the erosion of the land surface. Therefore, if reinforcing feedbacks are established between erosion and land cover distribution over timescales relevant to landform development, then the interactions between vegetation and topography may create distinctive landforms, shaped by vegetation. We expose here a strong correlation between the spatial distribution of vegetation, erosion rates, and topography at a characteristic length scale of 10 2 -10 3 m (mesoscale topography) in the Luquillo Experimental forest (LEF) of Puerto Rico. We use high-resolution LiDAR topography to characterize landforms, satellite images to classify the vegetation into forest types, and in-situ produced cosmogenic 10 Be in the quartz extracted from soils and stream sediments to document spatial variations in soil erosion. The data document a strong correlation between forest type and topographic position (hilltop vs. valleys), and a correlation between topographic position and 10 Be-derived erosion rates over 10 3 −10 4 years. Erosion is faster in valleys, which are mostly covered by monocot Palm Forest, and slower on surrounding hills mostly covered by the dicot Palo Colorado Forest. Transition from one forest type to the next occurs across a break-in-slope that separates shallowly convex hilltops from deeply concave valleys (coves). The break-in-slope is the consequence of a longer-lasting erosional imbalance whereby coves erode faster than hills over landscape-shaping timescales. Such a deepening of the coves is usually spurred by external drivers, but such drivers are here absent. This implies that cove erosion is driven by a process originating within the coves themselves. We propose that vegetation is the primary driver of this imbalance, soil erosion being faster under Palm forest than under Palo Colorado forest. Concentration of the Palm forest in the deepening coves is reinforced by the better adaptation of Palm trees to the erosive processes that take place in the coves, once these develop steep slopes. At the current rate of landscape development, we find that the imbalance started within the past 0.1–1.5 My. The initiation of the process could correspond to time of settlement of these mountain slopes by the Palm and Palo Colorado forests.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1130/GES02259.1
