Conformal coating of nanopores with functional polymer nanolayers is the key to many emerging technologies such as miniature sensors and membranes for advanced molecular separations. While the polymer coatings are often used to introduce functional moieties, their controlled growth under nanoconfinement could serve as a new approach to manipulate the size and shape of coated nanopores, hence, enabling novel functions like molecular separation. However, precise control of coating thickness in the longitudinal direction of a nanopore is limited by the lack of a characterization method to profile coating thickness within the nanoconfined space. Here, we report an experimental approach that combines ion milling (IM) and high-resolution field emission scanning electron microscopy (FESEM) for acquiring an accurate depth profile of ultrathin (∼20 nm or less) coatings synthesized inside nanopores via initiated chemical vapor deposition (iCVD). The enhanced capability of this approach stems from the excellent x–y resolution achieved by FESEM (i.e., 4.9 nm/pixel), robust depth ( z) control enabled by IM (step size as small as 100 nm with R2 = 0.992), and the statistical power afforded by high-throughput sampling (i.e., ∼2000 individual pores). With that capability, we were able to determine with unparalleled accuracy and precision the depth profile of coating thickness and iCVD kinetics along 110-nm-diameter nanopores. That allowed us to uncover an unexpected coating depth profile featuring a maximum rate of polymerization at ∼250 nm underneath the top surface, i.e., down the pores, which we termed “necking.” The necking phenomenon deviates considerably from the conventionally assumed monotonous decrease in thickness along the longitudinal direction into a nanopore, as predicted by the diffusion-limited kinetics model of free radical polymerization. An initiator-centric collision model was then developed, which suggests that under the experimental conditions, the confinement imposed by the nanopores may lead to local amplification of the effective free radical concentration at z ≤ 100 nm and attenuation at z ≥ 500 nm, thus contributing to the observed necking phenomenon. The ion-milling-enabled depth profiling of ultrathin coatings inside nanopores, along with the initiator-mediated coating thickness control in the z-direction, may serve to enhance the performance of size-exclusion filtration membranes and even provide more flexible control of nanopore shape in the z dimension.
- Award ID(s):
- 1719875
- NSF-PAR ID:
- 10325608
- Date Published:
- Journal Name:
- Frontiers in Bioengineering and Biotechnology
- Volume:
- 9
- ISSN:
- 2296-4185
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Elastic broadband antireflection coatings for flexible optics using multi-layered polymer thin filmsFlexible optics and optoelectronic devices require stretchable and compliant antireflection coatings (ARC). Conventional optical coatings, typically inorganic thin films, are brittle and crack under strain, while porous or patterned surfaces often lack environmental endurance and/or involve complex processing. Polymeric optical thin films prepared by initiated chemical vapor deposition (iCVD) comprise a promising alternative class of materials. With iCVD, multilayered, uniform thin film coatings can be synthesized conformally on the surface of a temperature-sensitive substrate near room temperature with precise compositional and thickness control. In this study, a model two-layer coating design consisting of poly(1 H ,1 H ,6 H ,6 H -perfluorohexyl diacrylate) (pPFHDA) with a refractive index at 633 nm of n 633 = 1.426 was deposited atop poly(4-vinylpyridine) (p4VP, n 633 = 1.587). Broadband antireflection over the visible wavelength range (400–750 nm) was conferred to a transparent, flexible thermoplastic polyurethane (TPU) substrate ( n 633 ∼ 1.51), reducing the front-surface reflectance from ∼4% to ∼2%. The superior mechanical compliance of polymer ARCs over conventional inorganic coatings (MgF 2 , SiO 2 , and Al 2 O 3 ) on the TPU substrate was thoroughly investigated by monitoring the evolution of film morphology and tensile fracture with applied equibiaxial strain. The polymer ARC withstood at least ε = 1.64% equibiaxial strain without fracture, while all inorganic coatings cracked. Through a repeated application of strain over hundreds of cycles, the antireflection by the polymer film was shown to possess excellent stability and fatigue resilience. Finally, simulations of established iCVD polymer chemistries possessing larger index contrast revealed that reflectance can be further reduced to <1% or better.more » « less
-
Abstract We are reporting the effect of thickness on the Seebeck coefficient, electrical conductivity and power factor of Ca3Co4O9thin films grown on single-crystal Sapphire (0001) substrate. Pulsed laser deposition (PLD) technique was employed to deposit Ca3Co4O9films with precisely controlled thickness values ranging from 15 to 75 nm. Structural characterization performed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that the growth of Ca3Co4O9on Sapphire (0001) follows the island growth-mode. It was observed that in-plane grain sizes decrease from 126 to 31 nm as the thickness of the films decreases from 75 to 15 nm. The thermoelectric power measurements showed an overall increase in the value of the Seebeck coefficient as the films’ thickness decreased. The above increase in the Seebeck coefficient was accompanied with a simultaneous decrease in the electrical conductivity of the thinner films due to enhanced scattering of the charge carriers at the grain boundaries. Because of the competing mechanisms of the thickness dependence of Seebeck coefficient and electrical conductivity, the power factor of the films showed a non-monotonous functional dependence on thickness. The films with the intermediate thickness (60 nm) showed the highest power factor (~ 0.27 mW/m-K2at 720 K).
-
Two-Dimensional and Three-Dimensional Ultrathin Multilayer Hydrogels through Layer-by-Layer AssemblyStimuli-responsive multilayer hydrogels have opened new opportunities to design hierarchically organized networks with properties controlled at the nanoscale. These multilayer materials integrate structural, morphological, and compositional versatility provided by alternating layer-bylayer polymer deposition with the capability for dramatic and reversible changes in volumes upon environmental triggers, a characteristic of chemically crosslinked responsive networks. Despite their intriguing potential, there has been limited knowledge about the structure−property relationships of multilayer hydrogels, partly because of the challenges in regulating network structural organization and the limited set of the instrumental pool to resolve structure and properties at nanometer spatial resolution. This Feature Article highlights our recent studies on advancing assembly technologies, fundamentals, and applications of multilayer hydrogels. The fundamental relationships among synthetic strategies, chemical compositions, and hydrogel architectures are discussed, and their impacts on stimuli-induced volume changes, morphology, and mechanical responses are presented. We present an overview of our studies on thin multilayer hydrogel coatings, focusing on controlling and quantifying the degree of layer intermixing, which are crucial issues in the design of hydrogels with predictable properties. We also uncover the behavior of stratified “multicompartment” hydrogels in response to changes in pH and temperature. We summarize the mechanical responses of free-standing multilayer hydrogels, including planar thin coatings and films with closed geometries such as hollow microcapsules and nonhollow hydrogel microparticles with spherical and nonspherical shapes. Finally, we will showcase potential applications of pH- and temperature-sensitive multilayer hydrogels in sensing and drug delivery. The knowledge about multilayer hydrogels can advance the rational design of polymer networks with predictable and well-tunable properties, contributing to modern polymer science and broadening hydrogel applications.more » « less
-
Abstract A knowledge-based understanding of the plasma-surface-interaction with the aim to precisely control (reactive) sputtering processes for the deposition of thin films with tailored and reproducible properties is highly desired for industrial applications. In order to understand the effect of plasma parameter variations on the film properties, a single plasma parameter needs to be varied, while all other process and plasma parameters should remain constant. In this work, we use the Electrical Asymmetry Effect in a multi-frequency capacitively coupled plasma to control the ion energy at the substrate without affecting the ion-to-growth flux ratio by adjusting the relative phase between two consecutive driving harmonics and their voltage amplitudes. Measurements of the ion energy distribution function and ion flux at the substrate by a retarding field energy analyzer combined with the determined deposition rate
R dfor a reactive Ar/N2(8:1) plasma at 0.5 Pa show a possible variation of the mean ion energy at the substrateE migwithin a range of 38 and 81 eV that allows the modification of the film characteristics at the grounded electrode, when changing the relative phase shiftθ between the applied voltage frequencies, while the ion-to-growth flux ratio Γig/Γgrcan be kept constant. AlN thin films are deposited and exhibit an increase in compressive film stress from −5.8 to −8.4 GPa as well as an increase in elastic modulus from 175 to 224 GPa as a function of the mean ion energy. Moreover, a transition from the preferential orientation (002) at low ion energies to the (100), (101) and (110) orientations at higher ion energies is observed. In this way, the effects of the ion energy on the growing film are identified, while other process relevant parameters remain unchanged.