- Award ID(s):
- 1906727
- NSF-PAR ID:
- 10326660
- Date Published:
- Journal Name:
- Robotics
- Volume:
- 10
- Issue:
- 4
- ISSN:
- 2218-6581
- Page Range / eLocation ID:
- 114
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
This paper presents the design, modeling, analysis, and experimental results of a bipedal robotic system that utilizes two interconnected single degree-of-freedom leg mechanisms to produce stable forward locomotion and steering. The legs are composed of double four-bar mechanism connected in series that maintain a parallel orientation of a flat foot, relative to the biped body, that is actuated via a Reuleaux triangle cam-follower system to produce a desirable foot trajectory. The mechanical design of the leg mechanism is presented followed by kinematic analysis of the cam-follower system to select the optimal foot trajectory and synthesize the mechanism dimensions and produce a desired step height and step length. The concept of leg sequencing is then presented to maintain a constant body height above the ground and a constant forward walking velocity. Experimental results using an integrated prototype indicate that the proposed biped robot is capable of maintaining quasi-static stability during locomotion, maintaining a constant robot body height, maintaining a constant body orientation, move forward with a constant maximum velocity of 27.4 cm/s, and steer.more » « less
-
Animals utilize a number of neuronal systems to produce locomotion. One type of sensory organ that contributes in insects is the campaniform sensillum (CS) that measures the load on their legs. Groups of the receptors are found on high stress regions of the leg exoskeleton and they have significant effects in adapting walking behavior. Recording from these sensors in freely moving animals is limited by technical constraints. To better understand the load feedback signaled by CS to the nervous system, we have constructed a dynamically scaled robotic model of the Carausius morosus stick insect middle leg. The leg steps on a treadmill and supports weight during stance to simulate body weight. Strain gauges were mounted in the same positions and orientations as four key CS groups (Groups 3, 4, 6B, and 6A). Continuous data from the strain gauges were processed through a previously published dynamic computational model of CS discharge. Our experiments suggest that under different stepping conditions (e.g., changing “body” weight, phasic load stimuli, slipping foot), the CS sensory discharge robustly signals increases in force, such as at the beginning of stance, and decreases in force, such as at the end of stance or when the foot slips. Such signals would be crucial for an insect or robot to maintain intra- and inter-leg coordination while walking over extreme terrain.more » « less
-
Whole-body control (WBC) is a generic task-oriented control method for feedback control of loco-manipulation behaviors in humanoid robots. The combination of WBC and model-based walking controllers has been widely utilized in various humanoid robots. However, to date, the WBC method has not been employed for unsupported passive-ankle dynamic locomotion. As such, in this article, we devise a new WBC, dubbed the whole-body locomotion controller (WBLC), that can achieve experimental dynamic walking on unsupported passive-ankle biped robots. A key aspect of WBLC is the relaxation of contact constraints such that the control commands produce reduced jerk when switching foot contacts. To achieve robust dynamic locomotion, we conduct an in-depth analysis of uncertainty for our dynamic walking algorithm called the time-to-velocity-reversal (TVR) planner. The uncertainty study is fundamental as it allows us to improve the control algorithms and mechanical structure of our robot to fulfill the tolerated uncertainty. In addition, we conduct extensive experimentation for: (1) unsupported dynamic balancing (i.e., in-place stepping) with a six-degree-of-freedom biped, Mercury; (2) unsupported directional walking with Mercury; (3) walking over an irregular and slippery terrain with Mercury; and 4) in-place walking with our newly designed ten-DoF viscoelastic liquid-cooled biped, DRACO. Overall, the main contributions of this work are on: (a) achieving various modalities of unsupported dynamic locomotion of passive-ankle bipeds using a WBLC controller and a TVR planner; (b) conducting an uncertainty analysis to improve the mechanical structure and the controllers of Mercury; and (c) devising a whole-body control strategy that reduces movement jerk during walking.more » « less
-
Small ground‐based robots show promise for locomotion on complex surfaces. A critical application area for such robots is movement over complex terrain and within constricted space such as narrow gaps in rubble. To contend with this terrain complexity, robots typically require high degree‐of‐freedom (DOF) limbs. However, for small robot platforms, this approach of high DOF legs is impractical due to actuator limitations. This presents an opportunity to design robots whose morphology enables the outsourcing of computational tasks to the robot body through the use of compliant elements (morphological computation). Herein, a novel robot appendage is developed that can passively compress in a programmed direction in response to environmental constrictions. A robot equipped with these appendages can enter narrow spaces down to 72% of the robot's sprawled body width as well as low ceilings down to 68% its freestanding height. The robot is able to step onto and over small terrain features ( hip height) and navigate various natural terrain types with ease. The results show that these compressible appendages enable versatile robot locomotion for robot exploration in previously unmapped environments.
-
The agile and power-efficient locomotion of a water strider has inspired many water-walking devices. These bioinspired water strider robots generally adopt a DC motor to create a sculling trajectory of the driving leg. These robots are, thus, inevitably heavy with many supporting legs decreasing the velocity of the robots. There have only been a few attempts to employ smart materials despite their advantages of being lightweight and having high power densities. This paper proposes an artificial muscle-based water-walking robot capable of moving forward and turning with four degrees of freedom. A compliant amplified shape memory alloy actuator (CASA) used to amplify the strain of a shape memory alloy wire enables a wide sculling motion of the actuation leg with only four supporting legs to support the entire weight of the robot. Design parameters to increase the actuation strain of the actuator and to achieve a desired swing angle (80°) are analyzed. Finally, experiments to measure the forward speed and angular velocities of the robot are carried out to compare with other robots. The robot weighs only 0.236 g and has a maximum and average speed of 1.56, 0.31 body length per second and a maximum and average angular velocity of 145.05°/s and 14.72°/s.more » « less