An official website of the United States government
Abstract Long-read sequencing technology enables significant progress in de novo genome assembly. However, the high error rate and the wide error distribution of raw reads result in a large number of errors in the assembly. Polishing is a procedure to fix errors in the draft assembly and improve the reliability of genomic analysis. However, existing methods treat all the regions of the assembly equally while there are fundamental differences between the error distributions of these regions. How to achieve very high accuracy in genome assembly is still a challenging problem. Motivated by the uneven errors in different regions of the assembly, we propose a novel polishing workflow named BlockPolish. In this method, we divide contigs into blocks with low complexity and high complexity according to statistics of aligned nucleotide bases. Multiple sequence alignment is applied to realign raw reads in complex blocks and optimize the alignment result. Due to the different distributions of error rates in trivial and complex blocks, two multitask bidirectional Long short-term memory (LSTM) networks are proposed to predict the consensus sequences. In the whole-genome assemblies of NA12878 assembled by Wtdbg2 and Flye using Nanopore data, BlockPolish has a higher polishing accuracy than other state-of-the-arts including Racon, Medaka and MarginPolish & HELEN. In all assemblies, errors are predominantly indels and BlockPolish has a good performance in correcting them. In addition to the Nanopore assemblies, we further demonstrate that BlockPolish can also reduce the errors in the PacBio assemblies. The source code of BlockPolish is freely available on Github (https://github.com/huangnengCSU/BlockPolish).
more »
« less
NeuralPolish: a novel Nanopore polishing method based on alignment matrix construction and orthogonal Bi-GRU Networks
Abstract Motivation Oxford Nanopore sequencing producing long reads at low cost has made many breakthroughs in genomics studies. However, the large number of errors in Nanopore genome assembly affect the accuracy of genome analysis. Polishing is a procedure to correct the errors in genome assembly and can improve the reliability of the downstream analysis. However, the performances of the existing polishing methods are still not satisfactory. Results We developed a novel polishing method, NeuralPolish, to correct the errors in assemblies based on alignment matrix construction and orthogonal Bi-GRU networks. In this method, we designed an alignment feature matrix for representing read-to-assembly alignment. Each row of the matrix represents a read, and each column represents the aligned bases at each position of the contig. In the network architecture, a bi-directional GRU network is used to extract the sequence information inside each read by processing the alignment matrix row by row. After that, the feature matrix is processed by another bi-directional GRU network column by column to calculate the probability distribution. Finally, a CTC decoder generates a polished sequence with a greedy algorithm. We used five real datasets and three assembly tools including Wtdbg2, Flye and Canu for testing, and compared the results of different polishing methods including NeuralPolish, Racon, MarginPolish, HELEN and Medaka. Comprehensive experiments demonstrate that NeuralPolish achieves more accurate assembly with fewer errors than other polishing methods and can improve the accuracy of assembly obtained by different assemblers. Availability and implementation https://github.com/huangnengCSU/NeuralPolish.git. Supplementary information Supplementary data are available at Bioinformatics online.
more »
« less
- Award ID(s):
- 1759856
- PAR ID:
- 10327133
- Editor(s):
- Robinson, Peter
- Date Published:
- Journal Name:
- Bioinformatics
- Volume:
- 37
- Issue:
- 19
- ISSN:
- 1367-4803
- Page Range / eLocation ID:
- 3120 to 3127
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Long nanopore reads are advantageous in de novo genome assembly. However, nanopore reads usually have broad error distribution and high-error-rate subsequences. Existing error correction tools cannot correct nanopore reads efficiently and effectively. Most methods trim high-error-rate subsequences during error correction, which reduces both the length of the reads and contiguity of the final assembly. Here, we develop an error correction, and de novo assembly tool designed to overcome complex errors in nanopore reads. We propose an adaptive read selection and two-step progressive method to quickly correct nanopore reads to high accuracy. We introduce a two-stage assembler to utilize the full length of nanopore reads. Our tool achieves superior performance in both error correction and de novo assembling nanopore reads. It requires only 8122 hours to assemble a 35X coverage human genome and achieves a 2.47-fold improvement in NG50. Furthermore, our assembly of the human WERI cell line shows an NG50 of 22 Mbp. The high-quality assembly of nanopore reads can significantly reduce false positives in structure variation detection.more » « less
-
null (Ed.)Efficient and accurate alignment of DNA/RNA sequence reads to each other or to a reference genome/transcriptome is an important problem in genomic analysis. Nanopore sequencing has emerged as a major sequencing technology and many long-read aligners have been designed for aligning nanopore reads. However, the high error rate makes accurate and efficient alignment difficult. Utilizing the noise and error characteristics inherent in the sequencing process properly can play a vital role in constructing a robust aligner. In this article, we design QAlign, a pre-processor that can be used with any long-read aligner for aligning long reads to a genome/transcriptome or to other long reads. The key idea in QAlign is to convert the nucleotide reads into discretized current levels that capture the error modes of the nanopore sequencer before running it through a sequence aligner.We show that QAlign is able to improve alignment rates from around 80\% up to 90\% with nanopore reads when aligning to the genome. We also show that QAlign improves the average overlap quality by 9.2, 2.5 and 10.8\% in three real datasets for read-to-read alignment. Read-to-transcriptome alignment rates are improved from 51.6\% to 75.4\% and 82.6\% to 90\% in two real datasets.https://github.com/joshidhaivat/QAlign.git.Supplementary data are available at Bioinformatics online.more » « less
-
Birol, Inanc (Ed.)Abstract Motivation Oxford Nanopore sequencing has great potential and advantages in population-scale studies. Due to the cost of sequencing, the depth of whole-genome sequencing for per individual sample must be small. However, the existing single nucleotide polymorphism (SNP) callers are aimed at high-coverage Nanopore sequencing reads. Detecting the SNP variants on low-coverage Nanopore sequencing data is still a challenging problem. Results We developed a novel deep learning-based SNP calling method, NanoSNP, to identify the SNP sites (excluding short indels) based on low-coverage Nanopore sequencing reads. In this method, we design a multi-step, multi-scale and haplotype-aware SNP detection pipeline. First, the pileup model in NanoSNP utilizes the naive pileup feature to predict a subset of SNP sites with a Bi-long short-term memory (LSTM) network. These SNP sites are phased and used to divide the low-coverage Nanopore reads into different haplotypes. Finally, the long-range haplotype feature and short-range pileup feature are extracted from each haplotype. The haplotype model combines two features and predicts the genotype for the candidate site using a Bi-LSTM network. To evaluate the performance of NanoSNP, we compared NanoSNP with Clair, Clair3, Pepper-DeepVariant and NanoCaller on the low-coverage (∼16×) Nanopore sequencing reads. We also performed cross-genome testing on six human genomes HG002–HG007, respectively. Comprehensive experiments demonstrate that NanoSNP outperforms Clair, Pepper-DeepVariant and NanoCaller in identifying SNPs on low-coverage Nanopore sequencing data, including the difficult-to-map regions and major histocompatibility complex regions in the human genome. NanoSNP is comparable to Clair3 when the coverage exceeds 16×. Availability and implementation https://github.com/huangnengCSU/NanoSNP.git. Supplementary information Supplementary data are available at Bioinformatics online.more » « less
-
Alkan, Can (Ed.)Abstract MotivationDetection of structural variants (SVs) from the alignment of sample DNA reads to the reference genome is an important problem in understanding human diseases. Long reads that can span repeat regions, along with an accurate alignment of these long reads play an important role in identifying novel SVs. Long-read sequencers, such as nanopore sequencing, can address this problem by providing very long reads but with high error rates, making accurate alignment challenging. Many errors induced by nanopore sequencing have a bias because of the physics of the sequencing process and proper utilization of these error characteristics can play an important role in designing a robust aligner for SV detection problems. In this article, we design and evaluate HQAlign, an aligner for SV detection using nanopore sequenced reads. The key ideas of HQAlign include (i) using base-called nanopore reads along with the nanopore physics to improve alignments for SVs, (ii) incorporating SV-specific changes to the alignment pipeline, and (iii) adapting these into existing state-of-the-art long-read aligner pipeline, minimap2 (v2.24), for efficient alignments. ResultsWe show that HQAlign captures about 4%–6% complementary SVs across different datasets, which are missed by minimap2 alignments while having a standalone performance at par with minimap2 for real nanopore reads data. For the common SV calls between HQAlign and minimap2, HQAlign improves the start and the end breakpoint accuracy by about 10%–50% for SVs across different datasets. Moreover, HQAlign improves the alignment rate to 89.35% from minimap2 85.64% for nanopore reads alignment to recent telomere-to-telomere CHM13 assembly, and it improves to 86.65% from 83.48% for nanopore reads alignment to GRCh37 human genome. Availability and implementationhttps://github.com/joshidhaivat/HQAlign.git.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1093/bioinformatics/btab354
