An official website of the United States government
In recent decades, more than 100 different mechanophores with a broad range of activation forces have been developed. For various applications of mechanophores in polymer materials, it is crucial to selectively activate the mechanophores with high efficiency, avoiding nonspecific bond scission of the material. In this study, we embedded cyclobutane-based mechanophore cross-linkers (I and II) with varied activation forces (fa) in the first network of the double network hydrogels and quantitively investigated the activation selectivity and efficiency of these mechanophores. Our findings revealed that cross-linker I, with a lower activation force relative to the bonds in the polymer main chain (fa-I/fa-chain = 0.8 nN/3.4 nN), achieved efficient activation with 100% selectivity. Conversely, an increase of the activation force of mechanophore II (fa-II/fa-chain = 2.5 nN/3.4 nN) led to a significant decrease of its activation efficiency, accompanied by a substantial number of nonspecific bond scission events. Furthermore, with the coexistence of two cross-linkers, significantly different activation forces resulted in the almost complete suppression of the higher-force one (i.e., I and III, fa-I/fa-III = 0.8 nN/3.4 nN), while similar activation forces led to simultaneous activations with moderate efficiencies (i.e., I and IV, fa-I/fa-IV = 0.8 nN/1.6 nN). These findings provide insights into the prevention of nonspecific bond rupture during mechanophore activation and enhance our understanding of the damage mechanism within polymer networks when using mechanophores as detectors. Besides, it establishes a principle for combining different mechanophores to design multiple mechanoresponsive functional materials.
more »
« less
Force-mediated molecule release from double network hydrogels
The incorporation of mechanosensitive linkages into polymers has led to materials with dynamic force responsivity. Here we report oxanorbornadiene cross-linked double network hydrogels that release molecules through a force-mediated retro Diels–Alder reaction. The molecular design and tough double network of polyacrylamide and alginate promote significantly higher activation at substantially less force than pure polymer systems. Activation at physiologically relevant forces provides scope for instilling dynamic mechanochemical behavior in soft biological materials.
more »
« less
- Award ID(s):
- 1653059
- PAR ID:
- 10327910
- Date Published:
- Journal Name:
- Chemical Communications
- Volume:
- 57
- Issue:
- 68
- ISSN:
- 1359-7345
- Page Range / eLocation ID:
- 8484 to 8487
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
ABSTRACT Recent studies have demonstrated that muscle force is not determined solely by activation under dynamic conditions, and that length history has an important role in determining dynamic muscle force. Yet, the mechanisms for how muscle force is produced under dynamic conditions remain unclear. To explore this, we investigated the effects of muscle stiffness, activation and length perturbations on muscle force. First, submaximal isometric contraction was established for whole soleus muscles. Next, the muscles were actively shortened at three velocities. During active shortening, we measured muscle stiffness at optimal muscle length (L0) and the force response to time-varying activation and length perturbations. We found that muscle stiffness increased with activation but decreased as shortening velocity increased. The slope of the relationship between maximum force and activation amplitude differed significantly among shortening velocities. Also, the intercept and slope of the relationship between length perturbation amplitude and maximum force decreased with shortening velocity. As shortening velocities were related to muscle stiffness, the results suggest that length history determines muscle stiffness and the history-dependent muscle stiffness influences the contribution of activation and length perturbations to muscle force. A two-parameter viscoelastic model including a linear spring and a linear damper in parallel with measured stiffness predicted history-dependent muscle force with high accuracy. The results and simulations support the hypothesis that muscle force under dynamic conditions can be accurately predicted as the force response of a history-dependent viscoelastic material to length perturbations.more » « less
-
Abstract Cell engineering, soft robotics, and wearable electronics often desire soft materials that are easy to deform, self‐heal readily, and can relax stress rapidly. Hydrogels, a type of hydrophilic networks, are such kind of materials that can be made responsive to environmental stimuli. However, conventional hydrogels often suffer from poor stretchability and repairability. Here, hydrogels consisting of boronic ester dynamic covalent bonds in a double network of poly(vinyl alcohol)/boric acid and chitosan are synthesized, which demonstrate extreme stretchability (up to 310 times the original length), instant self‐healing (within 5 s), and reusability and inherent adhesion. Their instant stress relaxation stems from a low activation energy of the boronic ester bond exchange (≤20 kJ mol−1) and contributes to the extreme stretchability and self‐healing behaviors. Various water‐dispersible additives can be readily incorporated in the hydrogels via hand kneading for potential applications such as soft electronics, bio‐signal sensing, and soft artificial joints.more » « less
-
ABSTRACT Hill-type muscle models are widely used, even though they do not accurately represent the relationship between activation and force in dynamic contractions. We explored the use of neural networks as an alternative approach to capture features of dynamic muscle function, without a priori assumptions about force–length–velocity relationships. We trained neural networks using an existing dataset of two guinea fowl muscles to estimate muscle force from activation, fascicle length and velocity. Training data were recorded using sonomicrometry, electromyography and a tendon buckle. First, we compared the neural networks with Hill-type muscle models, using the same data for network training and model optimization. Second, we trained neural networks on larger datasets, in a more realistic machine learning scenario. We found that neural networks generally yielded higher coefficients of determination and lower errors than Hill-type muscle models. Neural networks performed better when estimating forces on the muscle used for training, but on another bird, than on a different muscle of the same bird, likely due to inaccuracies in activation and force scaling. We extracted force–length and force–velocity relationships from the trained neural networks and found that both effects were underestimated and the relationships were not well replicated outside the training data distribution. We discuss suggested experimental designs and the challenge of collecting suitable training data. Given a suitable training dataset, neural networks could provide a useful alternative to Hill-type muscle models, particularly for modeling muscle dynamics in faster movements; however, scaling of the training data should be comparable between muscles and animals.more » « less
-
An ongoing challenge in soft materials is to develop networks with high mechanical robustness while showing complete self-healing and stress relaxation. In this study we develop triple network (TN) materials with three different polymers with distinct dynamic linkers (Diels–Alder, boronic acid-ester and hydrogen bonding). TN materials exhibit significant improvement of strength, stability and excellent self-healing properties simultaneously compared to their analogous double networks (DNs). All the TNs (TN-FMA 5%, 7% and 9%) show higher tensile strength over all DNs. In addition, TN-FMA (9%) demonstrates an excellent fracture energy over 20 000 J m −2 , 750% elongation and fast stress relaxation. This highlights how dynamic bonding multiplicity and network structure can play a major role in improving the quality of dynamic materials.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D1CC02726C
