More Like this

1. 3,4,5‐Trimethoxy Substitution on an N‐DMBI Dopant with New N‐type Polymers: Polymer‐Dopant Matching for Improved Conductivity‐Seebeck Coefficient Relationship

   https://doi.org/10.1002/anie.202110505  

   Han, Jinfeng; Chiu, Arlene; Ganley, Connor; McGuiggan, Patricia M.; Thon, Susanna M.; Clancy, Paulette; Katz, Howard E. (October 2021, Angewandte Chemie International Edition)

   null (Ed.)

   Achieving high electrical conductivity and thermoelectric power factor simultaneously for n-type organic thermoelectrics is still challenging. By constructing two new acceptor-acceptor n-type conjugated polymers with different backbones and introducing the 3,4,5-trimethoxyphenyl group to form the new n-type dopant 1,3-dimethyl-2-(3,4,5-trimethoxyphenyl)-2,3-dihydro-1H-benzo[d]imidazole (TP-DMBI), high electrical conductivity of 11 S cm-1 and power factor of 32 μW m-1 K-2 are achieved. Calculations using Density Functional Theory show that TP-DMBI presents a higher singly occupied molecular orbital (SOMO) energy level of -1.94 eV than that of the common dopant 4-(1, 3-dimethyl-2, 3-dihydro-1H-benzoimidazol-2-yl) phenyl) dimethylamine (N-DMBI) (-2.36 eV), which can result in a larger offset between the SOMO of dopant and lowest unoccupied molecular orbital (LUMO) of n-type polymers, though that effect may not be dominant in the present work. The doped polymer films exhibit higher Seebeck coefficient and power factor than films using N-DMBI at the same doping levels or similar electrical conductivity levels. Moreover, TP-DMBI doped polymer films offer much higher electron mobility of up to 0.53 cm2 V-1 s-1 than films with N-DMBI doping, demonstrating the potential of TP-DMBI, and 3,4,5-trialkoxy DMBIs more broadly, for high performance n-type organic thermoelectrics. 

   more » « less
2. Solution‐Doped Donor–Acceptor Copolymers Based on Diketopyrrolopyrrole and 3, 3′‐Bis (2‐(2‐(2‐Methoxyethoxy) Ethoxy) ethoxy)‐2, 2′‐Bithiophene Exhibiting Outstanding Thermoelectric Power Factors with p ‐Dopants

   https://doi.org/10.1002/adfm.202309646  

   Mukhopadhyaya, Tushita; Wagner, Justine; Lee, Taein D; Ganley, Connor; Tanwar, Swati; Raj, Piyush; Li, Lulin; Song, Yunjia; Melvin, Sophia J; Ji, Yuyang; et al (February 2024, Advanced Functional Materials)

   Katz, Howard (Ed.)

   Abstract The design of polymeric semiconductors exhibiting high electrical conductivity (σ) and thermoelectric power factor (PF) will be vital for flexible large‐area electronics. In this work, four polymers based on diketopyrrolopyrrole (DPP), 2,3‐dihydrothieno[3,4‐b][1,4]dioxine (EDOT), thieno[3,2‐b]thiophene (TT), and 3, 3′‐bis (2‐(2‐(2‐methoxyethoxy) ethoxy) ethoxy)‐2, 2′‐bithiophene (MEET) are investigated as side‐chains, with the MEET polymers newly synthesized for this study. These polymers are systematically doped with tetrafluorotetracyanoquinodimethane ( F₄TCNQ), CF3SO3H, and the synthesized dopant Cp(CN)₃‐(COOMe)₃, differing in geometry and electron affinity. The DPP‐EDOT‐based polymer containing MEET as side‐chains exhibits the highest conductivity (σ) ≈700 S cm−1 in this series with the acidic dopant (CF₃SO₃H). This polymer also shows the lowest oxidation potential by cyclic voltammetry (CV), the strongest intermolecular interactions evidenced by differential scanning calorimetry (DSC), and has the most oxygen‐based functionality for possible hydrogen bonding and ionic screening. Other polymers exhibit high σ ≈300–500 S cm−1 and power factor up to 300 µW m⁻¹K⁻². The mechanism of conductivity is predominantly electronic, as validated by time‐dependent conductance studies and transient thermo voltage monitoring over time, including for those doped with the acid. These materials maintain significant thermal stability and air stability over ≈6 weeks. Density functional theory calculations reveal molecular geometries and inform about frontier energy levels. Raman spectroscopy, in conjunction with scanning electron microscopy (SEM‐EDS) and x‐ray diffraction, provides insight into the solid‐state microstructure and degree of phase separation of the doped polymer films. Infrared spectroscopy enables this study to further quantify the degree of charge transfer from polymer to dopant. 

   more » « less
3. A high-conductivity n-type polymeric ink for printed electronics

   https://doi.org/10.1038/s41467-021-22528-y  

   Yang, Chi-Yuan; Stoeckel, Marc-Antoine; Ruoko, Tero-Petri; Wu, Han-Yan; Liu, Xianjie; Kolhe, Nagesh B.; Wu, Ziang; Puttisong, Yuttapoom; Musumeci, Chiara; Massetti, Matteo; et al (December 2021, Nature Communications)

   Abstract Conducting polymers, such as the p -doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), have enabled the development of an array of opto- and bio-electronics devices. However, to make these technologies truly pervasive, stable and easily processable, n -doped conducting polymers are also needed. Despite major efforts, no n -type equivalents to the benchmark PEDOT:PSS exist to date. Here, we report on the development of poly(benzimidazobenzophenanthroline):poly(ethyleneimine) (BBL:PEI) as an ethanol-based n -type conductive ink. BBL:PEI thin films yield an n -type electrical conductivity reaching 8 S cm −1 , along with excellent thermal, ambient, and solvent stability. This printable n -type mixed ion-electron conductor has several technological implications for realizing high-performance organic electronic devices, as demonstrated for organic thermoelectric generators with record high power output and n -type organic electrochemical transistors with a unique depletion mode of operation. BBL:PEI inks hold promise for the development of next-generation bioelectronics and wearable devices, in particular targeting novel functionality, efficiency, and power performance. 

   more » « less
4. The effect of aromatic ring size in electron deficient semiconducting polymers for n-type organic thermoelectrics

   https://doi.org/10.1039/D0TC03347B  

   Alsufyani, Maryam; Hallani, Rawad K.; Wang, Suhao; Xiao, Mingfei; Ji, Xudong; Paulsen, Bryan D.; Xu, Kai; Bristow, Helen; Chen, Hu; Chen, Xingxing; et al (November 2020, Journal of Materials Chemistry C)

   null (Ed.)

   N-type semiconducting polymers have been recently utilized in thermoelectric devices, however they have typically exhibited low electrical conductivities and poor device stability, in contrast to p-type semiconductors, which have been much higher performing. This is due in particular to the n-type semiconductor's low doping efficiency, and poor charge carrier mobility. Strategies to enhance the thermoelectric performance of n-type materials include optimizing the electron affinity (EA) with respect to the dopant to improve the doping process and increasing the charge carrier mobility through enhanced molecular packing. Here, we report the design, synthesis and characterization of fused electron-deficient n-type copolymers incorporating the electron withdrawing lactone unit along the backbone. The polymers were synthesized using metal-free aldol condensation conditions to explore the effect of enlarging the central phenyl ring to a naphthalene ring, on the electrical conductivity. When n-doped with N-DMBI, electrical conductivities of up to 0.28 S cm −1 , Seebeck coefficients of −75 μV K −1 and maximum Power factors of 0.16 μW m −1 K −2 were observed from the polymer with the largest electron affinity of −4.68 eV. Extending the aromatic ring reduced the electron affinity, due to reducing the density of electron withdrawing groups and subsequently the electrical conductivity reduced by almost two orders of magnitude. 

   more » « less
5. The effects of humidity on the electrical properties and carrier mobility of semiconducting polymers anion-exchange doped with hygroscopic salts

   https://doi.org/10.1063/5.0169905  

   Duong, Quynh M; Garcia_Vidales, Diego; Schwartz, Benjamin J (November 2023, Applied Physics Letters)

   To improve their electrical conductivity for various applications, semiconducting polymer films are often chemically doped to increase their equilibrium charge carrier density. Recently, a novel doping method involving anion exchange has provided control over the identity of the counterions that reside in such films, leading to increased stability under ambient conditions. In this work, however, we show that by ion-exchanging 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane-doped poly(3-hexylthiophene-2,5-diyl) films with hygroscopic salts like bis(trifluoromethane)sulfonimide lithium or LiPF6, the doped film's electrical conductivity drops significantly when exposed to ambient humidity. The change in electrical conductivity depends directly on the degree of hygroscopicity of the counterion and can be over 50% with relatively modest changes in relative humidity (RH), and up to a factor of four between ambient and completely dry conditions. The film's humidity response is entirely reversible when adsorbed water is removed, potentially allowing the doped semiconducting polymer films to function as humidity sensors. Hall effect measurements show that the cause of the drop in conductivity with increasing RH is due to a decrease in carrier mobility and not due to de-doping. Our results emphasize that it is important to control the sample environment when making electrical measurements on anion-exchange doped semiconducting polymer films. 

   more » « less