skip to main content

Explore Research Products in the NSF-PAR

Title: Implications of in situ chalcogen substitutions in polysulfides for rechargeable batteries
The electrochemical behavior of sulfur-based batteries is intrinsically governed by polysulfide species. Here, we compare the substitutions of selenium and tellurium into polysulfide chains and demonstrate their beneficial impact on the chemistry of lithium–sulfur batteries. While selenium-substituted polysulfides enhance cathode utilization by effectively catalyzing the sulfur/Li 2 S conversion reactions due to the preferential formation of radical intermediates, tellurium-substituted polysulfides improve lithium cycling efficiency by reducing into a passivating interfacial layer on the lithium surface with low Li + -ion diffusion barriers. This unconventional strategy based on “molecular engineering” of polysulfides and exploiting the intrinsic polysulfide shuttle effect is validated by a ten-fold improvement in the cycle life of lean-electrolyte “anode-free” pouch cells. Assembled with no free lithium metal at the anode, the anode-free configuration maximizes the energy density, mitigates the challenges of handling thin lithium foils, and eliminates self-discharge upon cell assembly. The insights generated into the differences between selenium and tellurium chemistries can be applied to benefit a broad range of metal–chalcogen batteries as well as chalcogenide solid electrolytes.  more » « less
Award ID(s):
2011415
NSF-PAR ID:
10331093
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Energy & Environmental Science
Volume:
14
Issue:
10
ISSN:
1754-5692
Page Range / eLocation ID:
5423 to 5432
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ( , Advanced Energy Materials)
    Abstract

    The development of practical lithium–sulfur (Li–S) batteries with prolonged cycle life and high Coulombic efficiency is limited by both parasitic reactions from dissolved polysulfides and mossy lithium deposition. To address these challenges, here lithium trithiocarbonate (Li2CS3)‐coated lithium sulfide (Li2S) is employed as a dual‐function cathode material to improve the cycling performance of Li–S batteries. Interestingly, at the cathode, Li2CS3forms an oligomer‐structured layer on the surface to suppress polysulfide shuttle. The presence of Li2CS3alters the conventional sulfur reaction pathway, which is supported by material characterization and density functional theory calculation. At the anode, a stable in situ solid electrolyte interphase layer with a lower Li‐ion diffusion barrier is formed on the Li‐metal surface to engender enhanced lithium plating/stripping performance upon cycling. Consequently, the obtained anode‐free full cells with Li2CS3exhibit a superior capacity retention of 51% over 125 cycles, whereas conventional Li2S cells retain only 26%. This study demonstrates that Li2CS3inclusion is an efficient strategy for designing high‐energy‐density Li–S batteries with extended cycle life.

     
    more » « less
  2. ; ; ( , Small Science)

    Enhancing the reversibility of Li is crucial for extending the cycle life of Li‐limited anode‐free lithium–sulfur (Li–S) batteries. Incorporating tellurium (Te) in the system has proven to be highly effective by its reaction with polysulfides and forming a passivating interfacial layer on Li surface, which reduces the Li‐ion diffusion barrier. However, due to the poor utilization of Te, a significant amount of Te is required to improve cell cycling performance. To address this, nanowire‐structured Te (TeNW) is synthesized via a hydrothermal method and applied to Li2S‐based anode‐free cells to minimize the Te content in the system while extending the cell cycle life. Coating TeNW onto the separator greatly enhances Te utilization and demonstrates a significant cycle life improvement (38% retention over 300 cycles) with only 4 wt% TeNW content relative to the active material. The versatility of TeNW is further demonstrated by utilizing them with carbon nanotubes as the anode substrate. The exceptional performance of TeNW is attributed to the high‐surface‐area nanostructure and excellent conductive network, facilitating efficient electron transfer during cell cycling. These advantageous properties position TeNW as a promising material to enhance the cycle life of Li‐limited Li–S batteries.

     
    more » « less
  3. ; ; ( , Small)
    Abstract

    Lithium dendrite‐induced short circuits and material loss are two major obstacles to the commercialization of lithium–sulfur (Li−S) batteries. Here, a nanocarbon composite consisting of cotton‐derived Fe3C‐encapsulated multiwalled carbon nanotubes (Fe3C‐MWCNTs) and graphene effectively traps polysulfides to suppress lithium dendrite growth is reported. Machine learning combined with molecular dynamics (MD) simulations unveils a new polysulfide‐induced lithium dendrite formation mechanism: the migration of polysulfides away from the anode drags out lithium protrusions through localized lattice distortion of the lithium anode and traps lithium ions in the surrounding electrolyte, leading to lithium dendrite formation. The Li−S battery, constructed using the composite of cotton‐derived Fe3C‐MWCNTs and graphene that serves as both the sulfur host and the anode interlayer, exhibits exceptional cycling stability, impressive capacity retention, and effective mitigation of lithium dendrite formation. The findings offer valuable strategies to prevent lithium dendrite formation and enhance understanding of lithium dendrite growth in Li−S batteries.

     
    more » « less
  4. ; ; ( , Advanced Functional Materials)
    Abstract

    Despite the potential to become the next‐generation energy storage technology, practical lithium–sulfur (Li–S) batteries are still plagued by the poor cyclability of the lithium‐metal anode and sluggish conversion kinetics of S species. In this study, lithium tritelluride (LiTe3), synthesized with a simple one‐step process, is introduced as a novel electrolyte additive for Li–S batteries. LiTe3quickly reacts with lithium polysulfides and functions as a redox mediator to greatly improve the cathode kinetics and the utilization of active materials in the cathode. Moreover, the formation of a Li2TeS3/Li2Te‐enriched interphase layer on the anode surface enhances ionic transport and stabilizes Li deposition. By regulating the chemistry on both the anode and cathode sides, this additive enables a stable operation of anode‐free Li–S batteries with only 0.1 mconcentration in conventional ether‐based electrolytes. The cell with the LiTe3additive retains 71% of the initial capacity after 100 cycles, while the control cell retains only 23%. More importantly, with high utilization of Te, the additive enables significantly better cyclability of anode‐free pouch full‐cells under lean electrolyte conditions.

     
    more » « less
  5. ; ; ( , Journal of Materials Chemistry A)
    The promise of secondary sulfur-based batteries as a sustainable and low-cost alternative to electrochemical energy storage has been long held back by the polysulfide shuttle problem. Herein, we demonstrate the utilization of electrolyte-soluble additives based on (oxo)thiomolybdate as a tool to mitigate the effect of the polysulfide shuttle in secondary sulfur-based batteries. Through a variety of techniques, it is shown that the Mo-containing anionic additives undergo spontaneous nucleophilic reactions with the highly soluble, long-chain polysulfides via a neutral S-atom transfer process, yielding higher S/Mo ratio complexes along with short-chain polysulfides. More importantly, it is shown how the O/S atomic substitution on the molybdenum center can induce enzymatic-level enhancement in the above reaction rate by lowering the homolytic S–S bond cleavage energy. Lastly, through anode-level inspections, it was realized that the dendritic electroplating of Li was suppressed considerably in the system with oxo/thiomolybdate, thereby reducing the cell impedance and overpotential, leading to significantly improved cycle-life. The positive influence of the increased polysulfide uptake reaction kinetics is evidenced by stable cycle-life and a low capacity-fade rate of 0.1% per cycle in Li–S cells with a high sulfur loading and lean electrolyte compositions. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email