skip to main content


Title: Confinement Effects in Dynamics of Ionic Liquids with Polymer‐Grafted Nanoparticles
Ionic liquid mixed with poly(methyl methacrylate)-grafted nanoparticle aggregates at low particle concentrations was shown to exhibit different dynamics and ionic conductivity than that of pure ionic liquid in our previous studies. In this work, we report on the quasi-elastic neutron scattering results on ionic liquid containing polymer-grafted nanoparticles at the higher particle concentration. The diffusivity of imidazolium (HMIM + ) cations of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (HMIM-TFSI) in the presence of poly(methyl methacrylate)-grafted iron oxide nanoparticles and the ionic conductivity of solutions were discussed through the confinement. Analysis of the elastic incoherent structure factor suggested the confinement radius decreased with the addition of grafted particles in HMIM-TFSI/solvent mixture, indicating the confinement that is induced by the high concentration of grafted particles, shrinks the HMIM-TFSI restricted volume. We further conjecture that this enhanced diffusivity occurs as a result of the local ordering of cations within aggregates of poly(methyl methacrylate)-grafted particles.  more » « less
Award ID(s):
1807802
NSF-PAR ID:
10335932
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
ChemPhysChem
ISSN:
1439-4235
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    We incorporated polymer-grafted nanoparticles into ionic and zwitterionic liquids to explore the solvation and confinement effects on their heterogeneous dynamics using quasi-elastic neutron scattering (QENS). 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (HMIM-TFSI) mixed with deuterated poly(methyl methacrylate) (d-PMMA)-grafted nanoparticles is studied to unravel how dynamic coupling between PMMA and HMIM-TFSI influence the fast and slow diffusion characteristics of the HMIM + cations. The zwitterionic liquid, 1-butyl-3-methyl imidazole-2-ylidene borane (BMIM-BH 3 ) is critically selected and mixed with PMMA-grafted nanoparticles for comparison in this work as its ions do not self-dissociate and it does not couple with PMMA through ion-dipole interactions as HMIM-TFSI does. We find that long-range unrestricted diffusion of HMIM + cations is higher in well-dispersed particles than in aggregated particle systems, whereas the localized diffusion of HMIM + is measured to be higher in close-packed particles. Translational diffusion dynamics of BMIM-BH 3 is not influenced by any particle structures suggesting that zwitterions do not interact with PMMA. This difference between two ionic liquid types enables us to decouple polymer effects from the diffusion of ionic liquids, which is integral to understand the ionic transport mechanism in ionic liquids confined in polymer-grafted nanoparticle electrolytes. 
    more » « less
  2. The use of ionic liquids as solvent for polymers or polymer-grafted nanoparticles provides an exciting feature to explore electrolyte-polymer interaction. 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (HMIm-TFSI) holds specific interactions with the polymer through ion-dipole or hydrogen bonding. For this work, poly(methyl methacrylate)-b-poly(styrene sulfonate) (PMMA-b-PSS) copolymer-grafted Fe3O4 nanoparticles with different sulfonation levels (~4.9-10.9 mol% SS) were synthesized and their concentration dependent ionic conductivities were reported in acetonitrile and HMIm-TFSI/acetonitrile mixture. We found that conductivity enhancement with the particle concentration in acetonitrile was due to the aggregation of grafted particles, hence sulfonic domain connectivity. The ionic conductivity was found to be related to the effective hopping transfer within ionic channels. To the contrary, the conductivity decreased or remained constant with increasing particle concentration in HMIm-TFSI/acetonitrile. This result was attributed to the ion coupling between ionic liquid and copolymer domains. 
    more » « less
  3. Calcium-ion batteries emerged as a potential sustainable alternative energy storage system; however, there remains the need to further develop electrolytes to improve their performance. We report a gel polymer electrolyte (GPE)-based on polyvinylidene fluoride (PVDF) for calcium ion conduction. The gel electrolyte was synthesized by combining a PVDF polymer host, Ca(TFSI)2 salt, and N-methyl-2-pyrrolidone (NMP) solvent. Using Fourier transform infrared spectroscopy, we analyze the effect of salt concentration and drying temperature on the degree of salt dissociation in the electrolyte. Our results show that the concentration of free cations in the electrolyte is primarily coordinated with NMP as well as PVDF, generating a suitable network for ion transport, i.e., a liquid electrolyte encompassed within a polymer matrix. We find that processing conditions such as drying temperature, which varies solvent content, play a critical role in developing polymer electrolytes that demonstrate optimal electrochemical performance. The GPEs are semicrystalline and stable up to 120 °C, which is critical for their use in applications such as in electric vehicles and renewable energy storage systems. The ionic conductivity of the GPEs exhibit Arrhenius-type behavior, and the total ionic conductivity at room temperature is suitable for applications, with values of 0.85 × 10–4 S/cm for 0.5 M and 3.56 × 10–4 S/cm for 1.0 M concentrations. The results indicate that the GPE exhibits high conductivity and good stability, making it a promising candidate for use in high-performance calcium ion batteries. 
    more » « less
  4. Abstract

    Filler aggregation in polymer matrix nanocomposites leads to inhomogeneity in particle distribution and deterioration of mechanical properties. The use of polymer‐grafted nanoparticles (PGNPs) with polymers directly attached to the particle surfaces precludes aggregation of the filler. However, solids composed of PGNPs are mechanically weak unless the grafted chains are long enough to form entanglements between particles, and requiring long grafts limits the achievable filler density of the nanocomposite. In this work, long, entangled grafts are replaced with short reactive polymers that form covalent crosslinks between particles. Crosslinkable PGNPs, referred to as XNPs, can be easily processed from solution and subsequently cured to yield a highly filled yet mechanically robust composite. In this specific instance, silica nanoparticles are grafted with poly(glycidyl methacrylate), cast into films, and crosslinked with multifunctional amines at elevated temperatures. Indentation and scratch experiments show significant enhancement of hardness, modulus, and scratch resistance compared to non‐crosslinked PGNPs and to crosslinked polymer films without nanoparticle reinforcement. Loadings of up to 57 wt% are achieved while yielding uniform films that deform locally in a predominantly elastic manner. XNPs therefore potentially allow for the formulation of robust nanocomposites with a high level of functionality imparted by the selected filler particles.

     
    more » « less
  5. Solid polymer and perovskite-type ceramic electrolytes have both shown promise in advancing solid-state lithium metal batteries. Despite their favorable interfacial stability against lithium metal, polymer electrolytes face issues due to their low ionic conductivity and poor mechanical strength. Highly conductive and mechanically robust ceramics, on the other hand, cannot physically remain in contact with redox-active particles that expand and contract during charge-discharge cycles unless excessive pressures are used. To overcome the disadvantages of each material, polymer-ceramic composites can be formed; however, depletion interactions will always lead to aggregation of the ceramic particles if a homopolymer above its melting temperature is used. In this study, we incorporate Li 0.33 La 0.56 TiO 3 (LLTO) nanoparticles into a block copolymer, polystyrene- b -poly (ethylene oxide) (SEO), to develop a polymer-composite electrolyte (SEO-LLTO). TEMs of the same nanoparticles in polyethylene oxide (PEO) show highly aggregated particles whereas a significant fraction of the nanoparticles are dispersed within the PEO-rich lamellae of the SEO-LLTO electrolyte. We use synchrotron hard x-ray microtomography to study the cell failure and interfacial stability of SEO-LLTO in cycled lithium-lithium symmetric cells. Three-dimensional tomograms reveal the formation of large globular lithium structures in the vicinity of the LLTO aggregates. Encasing the SEO-LLTO between layers of SEO to form a “sandwich” electrolyte, we prevent direct contact of LLTO with lithium metal, which allows for the passage of seven-fold higher current densities without signatures of lithium deposition around LLTO. We posit that eliminating particle clustering and direct contact of LLTO and lithium metal through dry processing techniques is crucial to enabling composite electrolytes. 
    more » « less