skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Future of Work Issues for Florida Two-Year Engineering Technology Program
The two-year (60 semester credit hour) Engineering Technology (ET) Associate of Science (AS) degree program is available to students in 23 of the 25 Florida State Colleges that offer technician preparation degrees. As of 2020 there were over 2,000 students enrolled in this course of study. The degree has a Core set of courses completed in the first year followed by a set of specialized courses in year 2. The program has a high percentage of students working in industry during their course of study and enjoys an over 90% industry employment placement of its graduates. Graduates can also seamlessly articulate into an B.S. program offered in the Florida State College System as well as pursue a B.S. Engineering Technology degree that also leads to a Professional Engineers License. To maintain this rewarding ET career path, the Florida Advanced Technological Education Center (FLATE) with support from the Florida Department of Education, the National Science Foundation, and the National Institute of Standards and Technology, NIST, supported Manufacturing Extension Partnership (MEP) interacts directly with manufacturers, college technical faculty, and college upper administration to assure the ET degree program focus is manufacturing industry impact within each college service region.  more » « less
Award ID(s):
1939173
PAR ID:
10337132
Author(s) / Creator(s):
Editor(s):
Manufacturing Division Program Committee of ASEE
Date Published:
Journal Name:
ASEE annual conference exposition proceedings
ISSN:
2153-5868
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , ASEE annual conference)
    ASEE Manufacturing Division (Ed.)
    The manufacturing workspace and the technician workforce that supports that space tomorrow is an important issue to deal with today. As Industry 4.0 is absorbed into manufacturing facilities around the country, engineering technicians working in these facilities adjust to make tomorrow today. The National Science Foundation has supported the Florida Advanced Technological Education Center (FLATE) contiguously since 2004. FLATE's intent is to craft a manufacturing workforce that makes Florida manufacturers globally competitive. FLATE crafted and the Florida Department of Education now supported two-year Engineering Technology degree (A.S. ET) is the vehicle for manufacturing education in Florida. The degree is offered in over 85% of the colleges in the Florida College System (FCS) and has over 2,000 students enrolled statewide. The current NSF-supported project is to conduct an I4.0-focused Caucus of manufacturers and ET degree college faculty to collectively identify skill issues that will affect manufacturing production efficiency and product reliability. The project team initially used the nine Industry 4.0 (I4.0) technology areas identified by the Boston Consulting Group and selected four that will directly impact starting technicians working in companies that are already implementing Industry 4.0 technologies: (1) Autonomous Robots, (2) Simulation, (3) Industrial Internet of Things and (4) Additive/Subtractive Manufacturing and Advanced Materials. Technician skills are defined as those needed to set up, operate, troubleshoot, and maintain production and process equipment. Specific skills that fall in the I4.0 technologies identified as relevant for starting technicians were defined to be those that will be needed in the next 3-5 years. Initial questionnaire responses and subsequent data analysis detail are provided. Identified skills gaps as recognized by the manufacturers and faculty are provided and discussed. 
    more » « less
  2. ; ; ; ( , 2021 ASEE Virtual Annual Conference Content Access)
    Bucks County Community College (Bucks) in collaboration with Drexel University (Drexel) is committed to increasing the number of workforce ready engineers and engineering technicians and to creating a blueprint for 2+2 engineering education programs nationally. Recently, educational reform took an unexpected turn to remote teaching due to the world-wide COVID-19 pandemic. Within our NSF ATE grant to enhance our present engineering technology curriculum we modified and enhanced instructional and student engagement methods to assure workforce readiness of our students in a remote world. Curriculum enhancements within the engineering technology (ET) occupational major at Bucks and the B.S. in ET degree program at Drexel, modifications to delivery of workforce development certification programs through the Bucks Center for Workforce Development (CWD), and college-wide student engagement strategies were implemented to assure quality education and student engagement. Modifications to credit courses included asynchronous online courses, synchronous remote courses, and hybrid courses, which combined remote and on campus laboratory instruction. Our CWD implemented hybrid instruction that included necessary resources for students such as tool kits and borrowed laptop computers. In addition, a college wide program called Bucks+ was implemented through the Bucks Business and Innovation Department to increase enrollment, retention, and workforce readiness of students. The Bucks+ program focuses on student engagement through competition within curriculum, and extracurricular endeavors that prepare students for industry. We will share our successes and challenges within our call to action to engage students in a remote world and to enhance their educational experience through innovative instructional techniques. 
    more » « less
  3. ( , ASEE annual conference)
    The importance of authenticity has been examined in various aspects of education; this is especially true in the area of engineering education where most graduates will matriculate to industry. However, the importance of applied and authentic examples could be even more critical in workforce development programs. In these cases, students are often enrolled with a goal of using their acquired knowledge to advance their career or move into a new role. Purely theoretical or stylized examples would not be aligned with the educational goals of these students. As part of a National Science Foundation Advanced Technological Education grant, a certificate program in high value manufacturing (HVM) has been developed. The certificate program is a collaboration between a research intensive four-year institution and an urban community college. In this certificate program students will be taking courses in manufacturing processes, design, and other business-related subjects that are pertinent to the manufacture of low volume components that have high materials costs, stringent quality requirements, and critical project timelines. This unique content area requires example that comprise these pertinent aspects of HVM. This is particularly true of the five newly developed courses covering materials, project management, quality, logistics, and computer-aided design. While the analogous courses at a four-year degree granting institution would likely use stylized examples in these courses, this would not be preferable in an applied certificate program. This work discusses the acquisition and refinement of authentic and applied examples that are applicable to the HVM environment. Specifically, the use of industry contacts and the translation of examples into useable and appropriate examples are examined. These examples are detailed and compared to traditional stylized academic content. A methodology for examining student perceptions of these examples is also proposed. A discussion of the importance of authenticity in applied certificate programs is also presented. 
    more » « less
  4. ; ; ; ; ( , 2015 ASEE Annual Conference & Exposition)
    The 2012 President’s Council of Advisors on Science and Technology (PCAST) report “Engage to Excel: Producing One Million Additional College Graduates with Degrees in Science,Technology, Engineering, and Mathematics” indicated that addressing the retention problem in the first two years of college is the most promising and cost-effective strategy to produce the STEM professionals needed in order to retain US historical preeminence in science and technology. The California Community College System, with its 112 community colleges and 71 off-campus centers enrolling approximately 2.3 million students (roughly a third of all US community college students) is in a prime position to grow the future STEM workforce.However, in the face of shrinking resources and increasing costs and other barriers, an effective approach is needed in order to capitalize on this opportunity. One prong in this approach is to more fully exploit modern technological capabilities to reduce costs, broaden access, and improve educational productivity. This paper presents preliminary results of a collaborative project, Creating Alternative Learning Strategies for Transfer Engineering Programs (CALSTEP), which aims to strengthen community college engineering programs using distance education and other alternative delivery strategies that will enable small-to-medium community college engineering programs to provide their students access to lower-division engineering courses needed to be competitive for transfer to four-year engineering programs. Funded by a three-year grant through the National Science Foundation Improving Undergraduate STEM Education (NSF IUSE) program, CALSTEP will leverage existing educational resources and develop new ones for online lecture courses, as well as core engineering laboratory courses that are delivered either completely online, or with limited face-to-face interactions. The initial areas of focus for laboratory course development are: Introduction to Engineering, Engineering Graphics, Materials Science, and Circuit Analysis. CALSTEP will also develop alternative models of flipped classroom instruction to improve student success and enhance student access to engineering courses that otherwise could not be supported in traditional delivery modes due to low enrollment. The project will iteratively evaluate and refine the curriculum over the three-year grant period, as well as train other community college engineering faculty in the effective use of the curriculum and resources developed. 
    more » « less
  5. ; ; ; ; ; ( , 2016 ASEE Annual Conference & Exposition)
    Community colleges play an important role in educating future scientists and engineers, especially among students from groups that are traditionally underrepresented in science, technology, engineering, and mathematics. Community college transfer programs offer lower-division courses that students can take in preparation for transfer to a four-year program. For many small community colleges, however, developing a comprehensive transfer engineering program that prepares students to be competitive for transfer can be challenging due to a lack of facilities, resources, and local expertise. As a result, engineering education becomes inaccessible to many community college students. Through a grant from the National Science Foundation Improving Undergraduate STEM Education program (NSF IUSE), three community colleges from Northern California collaborated to develop resources and teaching strategies to enable small-to-medium community college engineering programs to support a comprehensive set of lower-division engineering courses that are delivered either completely online, or with limited face-to-face interactions. This paper focuses on the development and testing of the teaching and learning resources for Engineering Graphics, which is a four-unit course (three units of lecture and one unit of lab) covering the principles of engineering drawings, computer-aided design (using both AutoCAD and SolidWorks), and the engineering design process. The paper also presents the results of the pilot implementation of the curriculum, as well as a comparison of the outcomes of the online course with those from a regular, face-to-face course. Student performance on labs and tests in the two parallel sections of the course are compared. Additionally student surveys and interviews, conducted in both the online and face-to-face course are used to document and compare students’ perceptions of their learning experience, the effectiveness of the course resources, their use of these resources, and their overall satisfaction with the course. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email