An official website of the United States government
Understanding and predicting Arctic change and its impacts on global climate requires broad, sustained observations of the atmosphere-ice-ocean system, yet technological and logistical challenges severely restrict the temporal and spatial scope of observing efforts. Satellite remote sensing provides unprecedented, pan-Arctic measurements of the surface, but complementary in situ observations are required to complete the picture. Over the past few decades, a diverse range of autonomous platforms have been developed to make broad, sustained observations of the ice-free ocean, often with near-real-time data delivery. Though these technologies are well suited to the difficult environmental conditions and remote logistics that complicate Arctic observing, they face a suite of additional challenges, such as limited access to satellite services that make geolocation and communication possible. This paper reviews new platform and sensor developments, adaptations of mature technologies, and approaches for their use, placed within the framework of Arctic Ocean observing needs.
more »
« less
Novel approach to observing system simulation experiments improves information gain of surface–atmosphere field measurements
Abstract. The observing system design of multidisciplinary fieldmeasurements involves a variety of considerations on logistics, safety, andscience objectives. Typically, this is done based on investigator intuitionand designs of prior field measurements. However, there is potential forconsiderable increases in efficiency, safety, and scientific success byintegrating numerical simulations in the design process. Here, we present anovel numerical simulation–environmental response function (NS–ERF)approach to observing system simulation experiments that aidssurface–atmosphere synthesis at the interface of mesoscale and microscalemeteorology. In a case study we demonstrate application of the NS–ERFapproach to optimize the Chequamegon Heterogeneous Ecosystem Energy-balanceStudy Enabled by a High-density Extensive Array of Detectors 2019(CHEESEHEAD19). During CHEESEHEAD19 pre-field simulation experiments, we considered theplacement of 20 eddy covariance flux towers, operations for 72 h oflow-altitude flux aircraft measurements, and integration of various remotesensing data products. A 2 h high-resolution large eddy simulationcreated a cloud-free virtual atmosphere for surface and meteorologicalconditions characteristic of the field campaign domain and period. Toexplore two specific design hypotheses we super-sampled this virtualatmosphere as observed by 13 different yet simultaneous observing systemdesigns consisting of virtual ground, airborne, and satellite observations.We then analyzed these virtual observations through ERFs to yield an optimalaircraft flight strategy for augmenting a stratified random flux towernetwork in combination with satellite retrievals. We demonstrate how the novel NS–ERF approach doubled CHEESEHEAD19'spotential to explore energy balance closure and spatial patterning scienceobjectives while substantially simplifying logistics. Owing to its modularextensibility, NS–ERF lends itself to optimizing observing system designs alsofor natural climate solutions, emission inventory validation, urban airquality, industry leak detection, and multi-species applications, among otheruse cases.
more »
« less
- PAR ID:
- 10339144
- Date Published:
- Journal Name:
- Atmospheric Measurement Techniques
- Volume:
- 14
- Issue:
- 11
- ISSN:
- 1867-8548
- Page Range / eLocation ID:
- 6929 to 6954
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Abstract. Flux measurements of nitrogen oxides (NOx) were made over London usingairborne eddy covariance from a low-flying aircraft. Seven low-altitude flights were conducted over Greater London, performing multiple overpasses across the city during eight days in July 2014. NOx fluxes across theGreater London region (GLR) exhibited high heterogeneity and strong diurnalvariability, with central areas responsible for the highest emission rates(20–30 mg m−2 h−1). Other high-emission areas included the M25 orbital motorway. The complexity of London's emission characteristics makes it challenging to pinpoint single emissions sources definitively usingairborne measurements. Multiple sources, including road transport andresidential, commercial and industrial combustion sources, are all likely to contribute to measured fluxes. Measured flux estimates were compared toscaled National Atmospheric Emissions Inventory (NAEI) estimates, accountingfor monthly, daily and hourly variability. Significant differences were found between the flux-driven emissions and the NAEI estimates acrossGreater London, with measured values up to 2 times higher in Central London than those predicted by the inventory. To overcome the limitations ofusing the national inventory to contextualise measured fluxes, we usedphysics-guided flux data fusion to train environmental response functions(ERFs) between measured flux and environmental drivers (meteorological and surface). The aim was to generate time-of-day emission surfaces usingcalculated ERF relationships for the entire GLR; 98 % spatial coverage was achieved across the GLR at 400 m2 spatial resolution. All flight legprojections showed substantial heterogeneity across the domain, with highemissions emanating from Central London and major road infrastructure. Thediurnal emission structure of the GLR was also investigated, through ERF,with the morning rush hour distinguished from lower emissions during the early afternoon. Overall, the integration of airborne fluxes with anERF-driven strategy enabled the first independent generation of surfaceNOx emissions, at high resolution using an eddy-covariance approach,for an entire city region.more » « less
-
null (Ed.)The Chequamegon Heterogeneous Ecosystem Energy-Balance Study Enabled by a High-Density Extensive Array of Detectors 2019 (CHEESEHEAD19) is an ongoing National Science Foundation project based on an intensive field campaign that occurred from June to October 2019. The purpose of the study is to examine how the atmospheric boundary layer (ABL) responds to spatial heterogeneity in surface energy fluxes. One of the main objectives is to test whether lack of energy balance closure measured by eddy covariance (EC) towers is related to mesoscale atmospheric processes. Finally, the project evaluates data-driven methods for scaling surface energy fluxes, with the aim to improve model–data comparison and integration. To address these questions, an extensive suite of ground, tower, profiling, and airborne instrumentation was deployed over a 10 km × 10 km domain of a heterogeneous forest ecosystem in the Chequamegon–Nicolet National Forest in northern Wisconsin, United States, centered on an existing 447-m tower that anchors an AmeriFlux/NOAA supersite (US-PFa/WLEF). The project deployed one of the world’s highest-density networks of above-canopy EC measurements of surface energy fluxes. This tower EC network was coupled with spatial measurements of EC fluxes from aircraft; maps of leaf and canopy properties derived from airborne spectroscopy, ground-based measurements of plant productivity, phenology, and physiology; and atmospheric profiles of wind, water vapor, and temperature using radar, sodar, lidar, microwave radiometers, infrared interferometers, and radiosondes. These observations are being used with large-eddy simulation and scaling experiments to better understand submesoscale processes and improve formulations of subgrid-scale processes in numerical weather and climate models.more » « less
-
Abstract In the last decades the energy-balance-closure problem has been thoroughly investigated from different angles, resulting in approaches to reduce but not completely close the surface energy balance gap. Energy transport through secondary circulations has been identified as a major cause of the remaining energy imbalance, as it is not captured by eddy covariance measurements and can only be measured additionally with great effort. Several models have already been developed to close the energy balance gap that account for factors affecting the magnitude of the energy transport by secondary circulations. However, to our knowledge, there is currently no model that accounts for thermal surface heterogeneity and that can predict the transport of both sensible and latent energy. Using a machine-learning approach, we developed a new model of energy transport by secondary circulations based on a large data set of idealized large-eddy simulations covering a wide range of unstable atmospheric conditions and surface-heterogeneity scales. In this paper, we present the development of the model and show first results of the application on more realistic LES data and field measurements from the CHEESEHEAD19 project to get an impression of the performance of the model and how the application can be implemented on field measurements. A strength of the model is that it can be applied without additional measurements and, thus, can retroactively be applied to other eddy covariance measurements to model energy transport through secondary circulations. Our work provides a promising mechanistic energy balance closure approach to 30-min flux measurements.more » « less
-
NA (Ed.)Satellite-based evapotranspiration (ET) products inform decision-making regarding water availability and plant water use from sub-field to watershed scales. These products are validated using eddy covariance flux towers, where observations are subject to the influence of landscape heterogeneity due to a constantly shifting contributing area, or flux footprint, governed by surface and atmospheric drivers. In agricultural regions with multiple crop types, local heterogeneity may amplify the importance of appropriate grid cell selection for satellite ET comparisons. We evaluate the extent to which different satellite ET products capture both ET magnitudes and spatial variability due to landscape heterogeneity. We compare ECOSTRESS 70m instantaneous and daily ET products to flux tower observations in central Illinois with measurements at two heights, representing different but overlapping flux footprint areas. We estimate satellite ET based on a flux footprint weighting, gridded averages around the tower, and for crop-specific corn or soybean grid cells. In this region, the disALEXI daily ET product has better overall performance relative to the PT-JPL daily product, which is more sensitive to overpass times and tends to overestimate instantaneous ET. However, the PT-JPL model reflects more variability at high spatial resolution. Specifically, a footprint-derived ET improves the data-model comparison relative to disALEXI, and PT-JPL more closely replicates crop-specific and field-specific differences as inferred from the 2-height experimental setup. This study highlights differences in how models integrate spatial inputs, which lead to different representations of spatial variability for the same nominal resolution. This can also have important implications for understanding and predicting field-level differences in land-atmosphere fluxes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.5194/amt-14-6929-2021
