skip to main content


Title: Crustal Architecture of Puerto Rico Using Body-Wave Seismic Tomography and High-Resolution Earthquake Relocation
Abstract Puerto Rico is a highly seismically active island, where several damaging historical earthquakes have occurred and frequent small events persist. It situates at the boundary between the Caribbean and North American plates, featuring a complex fault system. Here, we investigate the seismotectonic crustal structure of the island by interpreting the 3D compressional-wave velocity VP and compressional- to shear-wave velocity ratio VP/VS models and by analyzing the distribution of the relocated earthquakes. The 3D velocity models are obtained by applying the simul2000 tomographic inversion algorithm based on the phase arrivals recorded by the Puerto Rico seismic network. We find high-VP and low-VP/VS anomalies in the eastern and central province between the Great Northern Puerto Rico fault zone and the Great Southern Puerto Rico fault zone, correlating with the Utuado pluton. Further, there are low-VP anomalies beneath both the Great Southern Puerto Rico fault zone and the South Lajas fault, indicating northerly dipping structures from the southwest to the northwest of the island. We relocate 19,095 earthquakes from May 2017 to April 2021 using the new 3D velocity model and waveform cross-correlation data. The relocated seismicity shows trends along the Investigator fault, the Ponce faults, the Guayanilla rift, and the Punta Montalva fault. The majority of the 2019–2021 Southwestern Puerto Rico earthquakes are associated with the Punta Montalva fault. Earthquakes forming 17° northward-dipping structures at various depths possibly manifest continuation of the Muertos trough, along which the Caribbean plate is being subducted beneath the Puerto Rico microplate. Our results show complex fault geometries of a diffuse fault network, suggesting possible subduction process accommodated by faults within a low-velocity zone.  more » « less
Award ID(s):
2022441 2022429
NSF-PAR ID:
10345481
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Seismological Research Letters
Volume:
93
Issue:
2A
ISSN:
0895-0695
Page Range / eLocation ID:
555 to 566
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract We present two new seismic velocity models for Alaska from joint inversions of body-wave and ambient-noise-derived surface-wave data, using two different methods. Our work takes advantage of data from many recent temporary seismic networks, including the Incorporated Research Institutions for Seismology Alaska Transportable Array, Southern Alaska Lithosphere and Mantle Observation Network, and onshore stations of the Alaska Amphibious Community Seismic Experiment. The first model primarily covers south-central Alaska and uses body-wave arrival times with Rayleigh-wave group-velocity maps accounting for their period-dependent lateral sensitivity. The second model results from direct inversion of body-wave arrival times and surface-wave phase travel times, and covers the entire state of Alaska. The two models provide 3D compressional- (VP) and shear-wave velocity (VS) information at depths ∼0–100  km. There are many similarities as well as differences between the two models. The first model provides a clear image of the high-velocity subducting plate and the low-velocity mantle wedge, in terms of the seismic velocities and the VP/VS ratio. The statewide model provides clearer images of many features such as sedimentary basins, a high-velocity anomaly in the mantle wedge under the Denali volcanic gap, low VP in the lower crust under Brooks Range, and low velocities at the eastern edge of Yakutat terrane under the Wrangell volcanic field. From simultaneously relocated earthquakes, we also find that the depth to the subducting Pacific plate beneath southern Alaska appears to be deeper than previous models. 
    more » « less
  2. Abstract

    We derive new, 3D, isotropic models of seismic compressional and shear wavespeeds, Vp and Vs, respectively, their ratio, Vp/Vs, and a catalog of relocated earthquakes for Southern California from more than 10 million P‐ and S‐wave arrivals associated with over 0.3 million earthquakes that occurred between 2000 and 2020. We augment high‐quality analyst‐reviewed phase arrival picks from the Southern California Earthquake Data Center with S‐wave arrival picks obtained with an automated algorithm, and we derive new wavespeed models via traveltime tomography formulated using Poisson‐Voronoi cells (Fang et al., 2020,https://doi.org/10.1785/0220190141). The results contribute to improved regional wavespeed models, particularly the Vp/Vs model, and absolute event locations. The obtained models correlate well with regional geological features and yield more accurate synthetic waveforms than other regional models do for waves with periods shorter than 5 s in much of the modeled region. The derived event catalog exhibits tighter spatial clustering than the standard regional catalog, thereby helping to characterize subsurface features of major faults. The regional 1D averaged Vp/Vs ratio shows high values at shallow depths, decreases to a minimum at about 10 km, then increases again at greater depths below 15 km. Deep seismicity correlates well with regions of Vp/Vs ratio lower than 1.75, which may indicate an increased brittle‐to‐ductile transition depth with an important influence on crustal mechanics. The new wavespeed models and seismic catalog can be useful for various studies including analyses of seismicity patterns and simulations of crustal deformation and ground motion.

     
    more » « less
  3. Abstract

    The Charlevoix Seismic Zone (CSZ) is located along the early Paleozoic St. Lawrence rift zone in southeastern Quebec at the location of a major Devonian impact structure. The impact structure superimposed major, steeply dipping basement faults trending approximately N35°E. Approximately 250 earthquakes are recorded each year and are concentrated within and beneath the impact structure. MostM4+ earthquakes associated with the rift faults occurred outside the impact structure. Apart from the unique distribution of earthquakes, stress inversion of focal mechanisms shows stress rotations within the CSZ, and in the CSZ relative to the stress orientation determined from borehole breakouts. The primary goal of this research is to investigate the combined effects of the preexisting structures and regional stresses on earthquake activity and stress rotations in the CSZ. We approach this using PyLith, a finite‐element code for simulations of crustal deformation. Adopting the results from recent hypocenter relocation and 3‐D tomography studies, we modify the locations and dips of the rift faults and assess the effect of the new fault geometries on stress distributions. We also discuss the effects of resolved velocity anomalies. We find that the observed stress rotation is due to the combined effect of the rift faults and the impact structure. One‐dimensional velocity models of the CSZ with an embedded impact structure and a combination of 65°‐40°‐40° and constant 70° fault dip models with a very low friction coefficient of 0.3 and cohesion of 0 MPa can explain the observed seismicity and more than 50% of the stress rotations.

     
    more » « less
  4. Abstract

    We investigated the seismic velocity structure of the Hikurangi margin in New Zealand to uncover the physical features of the subduction zone and explore the relationships between microearthquake seismicity, seismic velocity structure, and slow slip events. Using local earthquake tomography with data collected from both temporary ocean bottom seismometers and on‐land permanent seismic stations, we used the tomography code TomoFD to iteratively perform a damped least squared inversion of absolute P and S arrival times to obtain relocated hypocenters and generate 3D velocity models for Vp and Vp/Vs. The seismic tomography images show two high Vp/Vs anomalies, one offshore and adjacent to a subducted seamount and the other beneath the North Island of New Zealand. The ∼50‐km wide offshore anomaly extends ∼10 km beneath the plate interface and lies directly beneath the area that slipped at least 50 mm during the 2 week‐long 2014 slow slip event. High Vp/Vs values may be related to high pore fluid pressures from subducted sediments, and such increases in pore fluid pressures have been suggested to trigger the occurrence of slow slip events in active subduction zones. The second onshore high Vp/Vs anomaly is located in the overlying plate and subducting slab and correlates with areas suggested by other geophysical techniques to be rich in fluids. Our seismic imaging supports interpretations that subduction processes in the Hikurangi margin are highly dependent on physical features such as subducted seamounts and fluid‐rich sediments.

     
    more » « less
  5. Abstract

    Controlled and natural source seismic data are used to build a 3‐DPwave model for southern North Island, New Zealand, where the Pacific Plate subducts beneath the Australian Plate at a rate of ~41 mm/year. Our analysis reveals an abrupt along‐strike transition in overthrusting plate structure within Cook Strait. Contrasts in properties (Vp, Vp/Vs, and Qs) likely reflects the degree of deformation in the Australian Plate, where the Alpine‐Wairau and Awatere Faults mark the northern boundary of a terrane that has undergone >50° of clockwise vertical‐axis rotation since the early Miocene. Heterogeneity of the crustal transition is likely associated with changes in frictional and elastic properties that may impact elastic stress accumulation and inhibit southward propagation of megathrust earthquakes. Low connectivity of faults in Cook Strait is consistent with the heterogeneity we observe and may promote complex earthquake triggering by lateral stress loading during earthquakes or slow slip events.

     
    more » « less