skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: The Trajectory of the (η 5-Cyclopentadienyl)cobalt-Mediated Cycloisomerization of Ene-Yne-Ene-Type Allyl Propargylic Ethers to Furans: A DFT Appraisal
Abstract The mechanisms by which the complexes CpCoL2 (Cp = C5H5; L = CO or CH2=CH2) mediate the cycloisomerizations of α,δ,ω-enynenes containing allylic ether linkages are probed by DFT methods. The outcomes corroborate experimental results and provide energetic and structural details of the trajectories leading to 3-(oxacyclopentyl or cycloalkyl)furans via the intermediacy of isolable CpCo-η 4-dienes. They comprise initial stereoselective complexation of one of the double bonds and the triple bond, rate-determining oxidative coupling to a triplet 16e cobalta-2-cyclopentene, and terminal double bond docking, followed by stereocontrolled insertion to assemble intermediate cis- and trans-fused triplet cobalta-4-cycloheptenes. A common indicator of the energetic facility of the latter is the extent of parallel alignment of the alkene moiety and its target Co–Cα bond. The cobalta-4-cycloheptenes transform further by β-hydride elimination–reductive elimination to furnish CpCo-η 4-dienes, which are sufficiently kinetically protected to allow for their experimental observation. The cascade continues through cobalt-mediated hydride shifts and dissociation of the aromatic furan ring. The findings in silico with respect to the stereo-, regio-, and chemoselectivity are in consonance with those obtained in vitro.  more » « less
Award ID(s):
1764328
PAR ID:
10346564
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Synthesis
Volume:
53
Issue:
22
ISSN:
0039-7881
Page Range / eLocation ID:
4279 to 4289
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Experimental and computational studies address key questions in a structure–function analysis of bioinspired electrocatalysts for the HER. Combinations of NiN 2 S 2 or [(NO)Fe]N 2 S 2 as donors to (η 5 -C 5 H 5 )Fe(CO) + or [Fe(NO) 2 ] +/0 generate a series of four bimetallics, gradually “softened” by increasing nitrosylation, from 0 to 3, by the non-innocent NO ligands. The nitrosylated NiFe complexes are isolated and structurally characterized in two redox levels, demonstrating required features of electrocatalysis. Computational modeling of experimental structures and likely transient intermediates that connect the electrochemical events find roles for electron delocalization by NO, as well as Fe–S bond dissociation that produce a terminal thiolate as pendant base well positioned to facilitate proton uptake and transfer. Dihydrogen formation is via proton/hydride coupling by internal S–H + ⋯ − H–Fe units of the “harder” bimetallic arrangements with more localized electron density, while softer units convert H − ⋯H − via reductive elimination from two Fe–H deriving from the highly delocalized, doubly reduced [Fe 2 (NO) 3 ] − derivative. Computational studies also account for the inactivity of a Ni 2 Fe complex resulting from entanglement of added H + in a pinched –S δ− ⋯H + ⋯ δ− S− arrangement. 
    more » « less
  2. Catalytic site-selective hydroallylation of vinyl arenes and 1,3-dienes is reported. Transformations are promoted by a readily accessible bidentate carbodicarbene-rhodium complex and involve commercially available allyltrifluoroborates and an alco-hol. The reaction is applicable to vinyl arenes, and aryl or alkyl-substituted 1,3-dienes (30 examples). Allyl addition products are generated in 40–78% yield and in up to >98:2 site-selectivity. Reaction outcomes are consistent with the intermedi-acy of a Rh(III)-hydride generated by protonation of Rh(I) by an acid. A number of key mechanistic details of the reaction are presented: (1) Deuterium scrambling into the product and starting alkene indicates reversible Rh(III)–H migratory insertion. (2) A large primary kinetic isotope effect is observed. (3) With substituted allyltrifluoroborates (e.g., crotyl-BF3K) mixtures of site isomers are generated as a result of transmetalation followed by Rh-(allyl) complex equilibration; consequently, disproving outer-sphere addition of the allyl nucleophile to Rh(III)-(η3-allyl). (4) The stereochemical analysis of a cyclohexadiene allyl addition product supports a syn Rh(III)–hydride addition. (5) A Hammett plot shows a negative slope suggesting reductive elimination as the rate-determining step. Finally, utility is highlighted by a iodocyclization and cross metathesis. 
    more » « less
  3. Abstract The catalytic one‐bond isomerization (transposition) of 1‐alkenes is an emerging approach toZ‐2‐alkenes. Design of more selective catalysts would benefit from a mechanistic understanding of factors controllingZselectivity. We propose here a reaction pathway forcis‐Mo(CO)4(PCy3)(piperidine) (3), a precatalyst that shows highZselectivity for transposition of alpha olefins (e. g., 1‐octene to 2‐octene, 18 : 1Z : Eat 74 % conversion). Computational modeling of reaction pathways and isotopic labeling suggests the isomerization takes place via an allyl (1,3‐hydride shift) pathway, where oxidative addition offac‐(CO)3Mo(PCy3)(η2‐alkene) is followed by hydride migration from one position (cisto allyl C3carbon) to another (cisto allyl C1carbon) via hydride/CO exchanges. Calculated barriers for the hydride migration pathway are lower than explored alternative mechanisms (e. g., change of allyl hapticity, allyl rotation). To our knowledge, this is the first study to propose such a hydride migration in alkene isomerization. 
    more » « less
  4. We report the synthesis and reactivity of a model of [Fe]-hydrogenase derived from an anthracene-based scaffold that includes the endogenous, organometallic acyl(methylene) donor. In comparison to other non-scaffolded acyl-containing complexes, the complex described herein retains molecularly well-defined chemistry upon addition of multiple equivalents of exogenous base. Clean deprotonation of the acyl(methylene) C–H bond with a phenolate base results in the formation of a dimeric motif that contains a new Fe–C(methine) bond resulting from coordination of the deprotonated methylene unit to an adjacent iron center. This effective second carbanion in the ligand framework was demonstrated to drive heterolytic H 2 activation across the Fe( ii ) center. However, this process results in reductive elimination and liberation of the ligand to extrude a lower-valent Fe–carbonyl complex. Through a series of isotopic labelling experiments, structural characterization (XRD, XAS), and spectroscopic characterization (IR, NMR, EXAFS), a mechanistic pathway is presented for H 2 /hydride-induced loss of the organometallic acyl unit ( i.e. pyCH 2 –CO → pyCH 3 +CO). The known reduced hydride species [HFe(CO) 4 ] − and [HFe 3 (CO) 11 ] − have been observed as products by 1 H/ 2 H NMR and IR spectroscopies, as well as independent syntheses of PNP[HFe(CO) 4 ]. The former species ( i.e. [HFe(CO) 4 ] − ) is deduced to be the actual hydride transfer agent in the hydride transfer reaction (nominally catalyzed by the title compound) to a biomimetic substrate ([ Tol Im](BAr F ) = fluorinated imidazolium as hydride acceptor). This work provides mechanistic insight into the reasons for lack of functional biomimetic behavior (hydride transfer) in acyl(methylene)pyridine based mimics of [Fe]-hydrogenase. 
    more » « less
  5. Warren Piers (Ed.)
    Although cobalt( i ) bis-phosphine complexes have been implicated in many selective C–C bond-forming reactions, until recently relatively few of these compounds have been fully characterized or have been shown to be intermediates in catalytic reactions. In this paper we present a new practical method for the synthesis and isolation of several cobalt( i )-bis-phosphine complexes and their use in Co( i )-catalyzed reactions. We find that easily prepared ( in situ generated or isolated) bis-phosphine and (2,6- N -aryliminoethyl)pyridine (PDI) cobalt( ii ) halide complexes are readily reduced by 1,4-bis-trimethylsilyl-1,4-dihydropyrazine or commercially available lithium nitride (Li 3 N), leaving behind only innocuous volatile byproducts. Depending on the structures of the bis-phosphines, the cobalt( i ) complex crystallizes as a phosphine-bridged species [(P∼P)(X)Co I [μ-(P∼P)]Co I (X)(P∼P)] or a halide-bridged species [(P∼P)Co I [μ-(X)] 2 Co I (P∼P)]. Because the side-products are innocuous, these methods can be used for the in situ generation of catalytically competent Co( i ) complexes for a variety of low-valent cobalt-catalyzed reactions of even sensitive substrates. These complexes are also useful for the synthesis of rare cationic [(P∼P)Co I -η 4 -diene] + X − or [(P∼P)Co I -η 6 -arene] + X − complexes, which are shown to be excellent single-component catalysts for the following regioselective reactions of dienes: heterodimerizations with ethylene or methyl acrylate, hydroacylation and hydroboration. The reactivity of the single-component catalysts with the in situ generated species are also documented. 
    more » « less