skip to main content


Title: Enhancing organosilicon polymer-derived ceramic properties
Polymer-derived ceramic (PDC) nanocomposites enable access to a large library of functional properties starting from molecular design and incorporating nanofillers. Tailoring preceramic polymer (PCP) chemistry and nanofiller size and morphology can lead to usage of the nanocomposites in complex shapes and coatings with enhanced thermal and mechanical properties. A rational design of targeted nanocomposites requires an understanding of fundamental structure–property–performance relations. Thus, we tailor our discussions of PCP design and nanofiller integration into single source precursors as well as pyrolytic processing for functionalizing PDCs. We also discuss the promises and limitations of advanced characterization techniques such as 4D transmission electron microscopy and pair distribution functions to enable in situ mapping structural evolution. The feedback loop of in situ monitoring sets the foundation for enabling accelerated materials discovery with artificial intelligence. This perspective assesses the recent progress of PDC nanocomposite research nanocomposites and presents scientific and engineering challenges for synthesis, fabrication, processing, and advanced characterization of PDC nanocomposites for enhanced magnetic, electrical, and energy conversion and storage properties.  more » « less
Award ID(s):
2024546
NSF-PAR ID:
10351715
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Journal of Applied Physics
Volume:
132
Issue:
7
ISSN:
0021-8979
Page Range / eLocation ID:
070901
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Polymer nanocomposites have been sought after for their light weight, high performance (strength-to-mass ratio, renewability, etc.), and multi-functionality (actuation, sensing, protection against lightning strikes, etc.). Nano-/micro-engineering has achieved such advanced properties by controlling crystallinity, phases, and interfaces/interphases; hierarchical structuring, often bio-inspired, has been also implemented. While driven by the advanced properties of nanofillers, properties of polymer nanocomposites are critically affected by their structuring and interfaces/interphases due to their small size (< ~50 nm) and large surface area per volume. Measures of their property improvement by nanofiller addition are often smaller than theoretically predicted. Currently, application of these novel engineered materials is limited because these materials cannot often be made in large sizes without compromising nano-scale organization, and because their multi-scale structure-property relationships are not well understood. In this work, we study precise and fast nanofiller structuring with non-contact and energy-efficient application of oscillating magnetic fields. Magnetic assembly is a promising, scalable method to deliver bulk amount of nanocomposites while maintaining organized nanofiller structure throughout the composite volume. In the past, we have demonstrated controlled alignment of nanofillers with tunable inter-assembly distances with application of oscillating one-dimentional magnetic fields (~100s of G), by taking advantage of both magnetic attraction and repulsion. The low oscillation frequency (< 1 Hz) was tuned to achieve maghemite nanofiller alignment patterns, in an epoxy matrix, with different amount of inter-nanofiller contacts with the same nanofiller volume fraction (see Figure 1a). This work was recently expanded to three-dimensional assembly using a triaxial Helmholtz coil system (see Figure 1b); the system can apply the triaxial magnetic fields of varying magnitude (max. ±300G, ±250G, ±180G (x-y-z)) and frequency (0 to 1 Hz, ~0.1 Hz resolution) with controlled phase delay to the sample size of 1.5” x 2.5” x 3.5”(x-y-z). Two model systems are currently studied: maghemite nanofillers in an elastomer for magnetoactuation, and nickel-coated CNTs in an thermoset for mehcniacl and transport property reinforcement. The assembled nanofiller structures are currently characterized by microCT; microCT scan data (see Figure 1b) are segmented through a machine learning algorithm, and will be modeled for their transport properties using a Monte Carlo method. These estimated properties will be compared with the experimentally characterized mechanical, transport, and actuation properties, providing the structure-interphase-property relationships. In future, we plan to integrate these nanocomposites to CFRPs for interlaminar property reinforcement, possibly with an out-of-autoclave composite processing. 
    more » « less
  2. Abstract

    Both experimental results and theoretical models suggest the decisive role of the filler–matrix interfaces on the dielectric, piezoelectric, pyroelectric, and electrocaloric properties of ferroelectric polymer nanocomposites. However, there remains a lack of direct structural evidence to support the so‐called interfacial effect in dielectric nanocomposites. Here, a chemical mapping of the interfacial coupling between the nanofiller and the polymer matrix in ferroelectric polymer nanocomposites by combining atomic force microscopy–infrared spectroscopy (AFM–IR) with first‐principles calculations and phase‐field simulations is provided. The addition of ceramic fillers into a ferroelectric polymer leads to augmentation of the local conformational disorder in the vicinity of the interface, resulting in the local stabilization of the all‐transconformation (i.e., the polar β phase). The formation of highly polar and inhomogeneous interfacial regions, which is further enhanced with a decrease of the filler size, has been identified experimentally and verified by phase‐field simulations and density functional theory (DFT) calculations. This work offers unprecedented structural insights into the configurational disorder‐induced interfacial effect and will enable rational design and molecular engineering of the filler–matrix interfaces of electroactive polymer nanocomposites to boost their collective properties.

     
    more » « less
  3. ABSTRACT

    The glass transition is a genuine imprint of temperature‐dependent structural relaxation dynamics of backbone chains in amorphous polymers, which can also reflect features of chemical transformations induced in macromolecular architectures. Optimization of thermophysical properties of polymer nanocomposites beyond the state of the art is contingent on strong interfacial bonding between nanofiller particles and host polymer matrix chains that accordingly modifies glass transition characteristics. Contemporary polymer nanocomposite configurations have demonstrated only marginal glass transition temperature shifts utilizing conventional polymer matrix and functionalized nanofiller combinations. We present nanofiller‐contiguous polymer network with aromatic thermosetting copolyester nanocomposites in which carbon nanofillers covalently conjugate with cure advancing crosslinked backbone chains through functional end‐groups of constituent precursor oligomers upon anin situpolymerization reaction.Viathoroughly transformed backbone chain configuration, the polymer nanocomposites demonstrate unprecedented glass transition peak broadening by about 100 °C along with significant temperature upshift of around 80 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2018,56, 1595–1603

     
    more » « less
  4. Abstract

    Polymer‐grafted nanoparticles (PGNPs) are ideal additives to enhance the mechanical properties and functionality of a polymer matrix and can even potentially serve as single‐component building blocks for highly filled composites if the polymer content is kept low. The major challenge facing such syntheses is that PGNP‐based solids with short polymer brushes often have low mechanical strength and limited processability. It therefore remains difficult to form robust architectures with a variety of 3D macroscopic shapes from single‐component PGNP composites. Forming covalent bonds between cross‐linkable PGNPs is a promising route for overcoming this limitation in processability and functionality, but cross‐linking strategies often require careful blending of components or slow assembly methods. Here, a transformative aging strategy is presented that uses anhydride cross‐linking to enable facile processing of single‐component PGNP solids via thermoforming into arbitrary shapes. The use of lowTgpolymer brushes enables the production of macroscopic composites with>30 vol% homogeneously distributed filler, and aging increases stiffness by 1–2 orders of magnitude. This strategy can be adapted to a variety of polymer and nanofiller compositions and is therefore a potentially versatile approach to synthesize nanocomposites that are functional, mechanically robust, and easily processable.

     
    more » « less
  5. High‐energy‐density storage devices play a major role in modern electronics from traditional lithium‐ion batteries to supercapacitors for a variety of applications from rechargeable devices to advanced military equipment. Despite the mass adoption of polymer capacitors, their application is limited by their low energy densities and low‐temperature tolerance. Polymer nanocomposites based on 2D nanomaterials have superior capacitive energy densities, higher thermal stabilities, and higher mechanical strength as compared to the pristine polymers and nanocomposites based on 0D or 1D nanomaterials, thus making them ideal for high‐energy‐density dielectric energy storage applications. Here, the recent advances in 2D‐nanomaterial‐based nanocomposites and their implications for energy storage applications are reviewed. Nanocomposites based on conducting 2D nanofillers such as graphene, reduced graphene oxide, MXenes, semiconducting 2D nanofillers including transition metal dichalcogenides such as MoS2, dielectric 2D nanofillers including hBN, Mica, Al2O3, TiO2, Ca2Nb3O10and MMT, and their effects on permittivity, dielectric strength, capacitive energy density, efficiency, thermal stability, and the mechanical strength, are discussed. Also, the theory and machine‐learning‐guided design of polymer 2D nanomaterial composites is learnt and the challenges and opportunities for developing ultrahigh‐capacitive‐energy‐density devices based on these nanofiller polymer composites are presented.

     
    more » « less