An official website of the United States government
Introduction Using data collected from hearing aid users’ own hearing aids could improve the customization of hearing aid processing for different users based on the auditory environments they encounter in daily life. Prior studies characterizing hearing aid users’ auditory environments have focused on mean sound pressure levels and proportions of environments based on classifications. In this study, we extend these approaches by introducing entropy to quantify the diversity of auditory environments hearing aid users encounter. Materials and Methods Participants from 4 groups (younger listeners with normal hearing and older listeners with hearing loss from an urban or rural area) wore research hearing aids and completed ecological momentary assessments on a smartphone for 1 week. The smartphone was programmed to sample the processing state (input sound pressure level and environment classification) of the hearing aids every 10 min and deliver an ecological momentary assessment every 40 min. Entropy values for sound pressure levels, environment classifications, and ecological momentary assessment responses were calculated for each participant to quantify the diversity of auditory environments encountered over the course of the week. Entropy values between groups were compared. Group differences in entropy were compared to prior work reporting differences in mean sound pressure levels and proportions of environment classifications. Group differences in entropy measured objectively from the hearing aid data were also compared to differences in entropy measured from the self-report ecological momentary assessment data. Results Auditory environment diversity, quantified using entropy from the hearing aid data, was significantly higher for younger listeners than older listeners. Entropy measured using ecological momentary assessment was also significantly higher for younger listeners than older listeners. Discussion Using entropy, we show that younger listeners experience a greater diversity of auditory environments than older listeners. Alignment of group entropy differences with differences in sound pressure levels and hearing aid feature activation previously reported, along with alignment with ecological momentary response entropy, suggests that entropy is a valid and useful metric. We conclude that entropy is a simple and intuitive way to measure auditory environment diversity using hearing aid data.
more »
« less
Multirate Audiometric Filter Bank for Hearing Aid Devices
The frequency-dependent nature of hearing loss poses many challenges for hearing aid design. In order to compensate for a hearing aid user’s unique hearing loss pattern, an input signal often needs to be separated into frequency bands, or channels, through a process called sub-band decomposition. In this paper, we present a real-time filter bank for hearing aids. Our filter bank features 10 channels uniformly distributed on the logarithmic scale, located at the standard audiometric frequencies used for the characterization and fitting of hearing aids. We obtained filters with very narrow passbands in the lower frequencies by employing multi-rate signal processing. Our filter bank offers a 9.1× reduction in complexity as compared to conventional signal processing. We implemented our filter bank on Open Speech Platform, an open-source hearing aid, and confirmed real-time operation.
more »
« less
- Award ID(s):
- 1838897
- PAR ID:
- 10351928
- Date Published:
- Journal Name:
- 2021 55th Asilomar Conference on Signals, Systems, and Computers
- Page Range / eLocation ID:
- 1436 to 1442
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Spectrotemporal modulations (STM) are essential features of speech signals that make them intelligible. While their encoding has been widely investigated in neurophysiology, we still lack a full understanding of how STMs are processed at the behavioral level and how cochlear hearing loss impacts this processing. Here, we introduce a novel methodological framework based on psychophysical reverse correlation deployed in the modulation space to characterize the mechanisms underlying STM detection in noise. We derive perceptual filters for young normal-hearing and older hearing-impaired individuals performing a detection task of an elementary target STM (a given product of temporal and spectral modulations) embedded in other masking STMs. Analyzed with computational tools, our data show that both groups rely on a comparable linear (band-pass)–nonlinear processing cascade, which can be well accounted for by a temporal modulation filter bank model combined with cross-correlation against the target representation. Our results also suggest that the modulation mistuning observed for the hearing-impaired group results primarily from broader cochlear filters. Yet, we find idiosyncratic behaviors that cannot be captured by cochlear tuning alone, highlighting the need to consider variability originating from additional mechanisms. Overall, this integrated experimental-computational approach offers a principled way to assess suprathreshold processing distortions in each individual and could thus be used to further investigate interindividual differences in speech intelligibility.more » « less
-
Wireless assistive listening devices (ALDs), such as induction loops, radio-frequency transmitters, and digital streaming systems, improve accessibility for people with hearing loss by transmitting from a venue’s sound system directly to the listener. Today, ALDs are used primarily for lectures and performances. When paired with advanced hearing devices, however, they could form part of an augmented listening system that lets users "remix" sounds in their environment, including from loudspeakers in public spaces. For example, users could amplify public announcements or suppress background music while having a conversation. In the proposed system, a binaural adaptive filter uses the ALD signal to estimate the loudspeaker sound at the ears. The hearing device can then either enhance or remove the loudspeaker sound in the hearing device output while preserving other nearby sounds. We demonstrate the proposed system using several commercial ALDs and assess the effects of delay, bandwidth, distortion, and noise on real-world system performance.more » « less
-
Adults with mild-to-moderate hearing loss can use over-the-counter hearing aids to treat their hearing loss at a fraction of traditional hearing care costs. These products incorporate self-fitting methods that allow end-users to configure their hearing aids without the help of an audiologist. A self-fitting method helps users configure the gain-frequency responses that control the amplification for each frequency band of the incoming sound. This paper considers how to guide the design of self-fitting methods by evaluating certain aspects of their design using computational tools before performing user studies. Most existing fitting methods provide various user interfaces to allow users to select a configuration from a predetermined set of presets. Accordingly, it is essential for the presets to meet the hearing needs of a large fraction of users who suffer from varying degrees of hearing loss and have unique hearing preferences. To this end, we propose a novel metric for evaluating the effectiveness of preset-based approaches by computing their population coverage. The population coverage estimates the fraction of users for which a self-fitting method can find a configuration they prefer. A unique aspect of our approach is a probabilistic model that captures how a user's unique preferences differ from other users with similar hearing loss. Next, we propose methods for building preset-based and slider-based self-fitting methods that maximize the population coverage. Simulation results demonstrate that the proposed algorithms can effectively select a small number of presets that provide higher population coverage than clustering-based approaches. Moreover, we may use our algorithms to configure the number of increments of slider-based methods. We expect that the computational tools presented in this article will help reduce the cost of developing new self-fitting methods by allowing researchers to evaluate population coverage before performing user studies.more » « less
-
The accuracy of radar tracks depends strongly on the variances of the measurements, and those variances are inversely proportional to the signal-to-noise (SNR) produced the hardware and signal processor. The signal processor uses matched filter processing, and the efficiency of that depends on knowledge of the kinematics of the target. In particular, the matched filter performance depends heavily on range rate and range acceleration. Traditionally, the predicted state of the target from the track filter is used for matched filter processing, but the predicted kinematic state can have rather large errors, and those errors result in match filter loss. This loss can be very large for maneuvering (i.e., accelerating) targets. In this paper, an expected-maximization (EM) approach is taken to jointly address signal processing and tracking. The signal processor maximizes the SNR using the predicted state and produces measurements. The state estimator ( e.g., Kalman filter) uses those measurements to produce expected values of the kinematic state (i.e. the nuisance parameters). The signal processor then maximizes the SNR using the new state estimates. This process continues until the maximum likelihood values of the measurements are achieved. In this paper, the Interacting Multiple Model (IMM) estimator is introduced for the tracking function better address sudden maneuvers. The EM-Based approach to join signal processing and tracking are presented along with a discussion of the real-time computing. Monte Carlo simulation results are given to illustrate a 6 dB improvement in SNR and enhanced tracks for a maneuvering target.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/IEEECONF53345.2021.9723257
