More Like this

1. On the Reactivity Enhancement of Graphene by Metallic Substrates towards Aryl Nitrene Cycloadditions

   https://doi.org/10.1002/chem.202100227  

   Yang, Xiaojian ; Chen, Feiran ; Kim, Min A ; Liu, Haitao ; Wolf, Lawrence M ; Yan, Mingdi ( March 2021 , Chemistry – A European Journal)

   null (Ed.)

   Pristine graphene is fairly inert chemically, and as such, most application‐driven studies use graphene oxide, or reduced graphene oxide. Using substrates to modulate the reactivity of graphene represents a unique strategy in the covalent functionalization of this otherwise fairly inert material. We found that the reactivity of pristine graphene towards perfluorophenyl azide (PFPA) can be enhanced by a metal substrate on which graphene is supported. Results on the extent of functionalization, defect density, and reaction kinetics all show that graphene supported on Ni (G/Ni) has the highest reactivity toward PFPA, followed by G/Cu and then G/silicon wafer. DFT calculations suggest that the metal substrate stabilizes the physisorbed nitrene through enhanced electron transfer to the singlet nitrene from the graphene surface assisted by the electron rich metal substrate. The G/Ni substantially stabilizes the singlet nitrene relative to G/Cu and the free‐standing graphene. The product structure is also predicted to be substrate dependent. These findings open the opportunities to enhance the reactivity of pristine graphene simply through the selection of the substrate. This also represents a new and powerful approach to increasing the reactivity of singlet nitrene through direct electron communication with graphene. 

   more » « less
2. BF3–Catalyzed Diels–Alder Reaction between Butadiene and Methyl Acrylate in Aqueous Solution—An URVA and Local Vibrational Mode Study

   https://doi.org/10.3390/catal12040415  

   Freindorf, Marek ; Kraka, Elfi ( April 2022 , Catalysts)

   In this study we investigate the Diels–Alder reaction between methyl acrylate and butadiene, which is catalyzed by BF3 Lewis acid in explicit water solution, using URVA and Local Mode Analysis as major tools complemented with NBO, electron density and ring puckering analyses. We considered four different starting orientations of methyl acrylate and butadiene, which led to 16 DA reactions in total. In order to isolate the catalytic effects of the BF3 catalyst and those of the water environment and exploring how these effects are synchronized, we systematically compared the non-catalyzed reaction in gas phase and aqueous solution with the catalyzed reaction in gas phase and aqueous solution. Gas phase studies were performed at the B3LYP/6-311+G(2d,p) level of theory and studies in aqueous solution were performed utilizing a QM/MM approach at the B3LYP/6-311+G(2d,p)/AMBER level of theory. The URVA results revealed reaction path curvature profiles with an overall similar pattern for all 16 reactions showing the same sequence of CC single bond formation for all of them. In contrast to the parent DA reaction with symmetric substrates causing a synchronous bond formation process, here, first the new CC single bond on the CH2 side of methyl acrylate is formed followed by the CC bond at the ester side. As for the parent DA reaction, both bond formation events occur after the TS, i.e., they do not contribute to the energy barrier. What determines the barrier is the preparation process for CC bond formation, including the approach diene and dienophile, CC bond length changes and, in particular, rehybridization of the carbon atoms involved in the formation of the cyclohexene ring. This process is modified by both the BF3 catalyst and the water environment, where both work in a hand-in-hand fashion leading to the lowest energy barrier of 9.06 kcal/mol found for the catalyzed reaction R1 in aqueous solution compared to the highest energy barrier of 20.68 kcal/mol found for the non-catalyzed reaction R1 in the gas phase. The major effect of the BF3 catalyst is the increased mutual polarization and the increased charge transfer between methyl acrylate and butadiene, facilitating the approach of diene and dienophile and the pyramidalization of the CC atoms involved in the ring formation, which leads to a lowering of the activation energy. The catalytic effect of water solution is threefold. The polar environment leads also to increased polarization and charge transfer between the reacting species, similar as in the case of the BF3 catalyst, although to a smaller extend. More important is the formation of hydrogen bonds with the reaction complex, which are stronger for the TS than for the reactant, thus stabilizing the TS which leads to a further reduction of the activation energy. As shown by the ring puckering analysis, the third effect of water is space confinement of the reacting partners, conserving the boat form of the six-member ring from the entrance to the exit reaction channel. In summary, URVA combined with LMA has led to a clearer picture on how both BF3 catalyst and aqueous environment in a synchronized effort lower the reaction barrier. These new insights will serve to further fine-tune the DA reaction of methyl acrylate and butadiene and DA reactions in general. 

   more » « less
3. Ad aurum: tunable transfer of N-heterocyclic carbene complexes to gold surfaces

   https://doi.org/10.1039/d2qi01941h  

   Dominique, Nathaniel L. ; Chen, Ran ; Santos, Alyssa V. ; Strausser, Shelby L. ; Rauch, Theodore ; Kotseos, Chandler Q. ; Boggess, William C. ; Jensen, Lasse ; Jenkins, David M. ; Camden, Jon P. ( November 2022 , Inorganic Chemistry Frontiers)

   The exceptional stability of N-heterocyclic carbene (NHC) monolayers on gold surfaces and nanoparticles (AuNPs) is enabling new and diverse applications from catalysis to biomedicine. Our understanding of NHC reactivity at surfaces; however, is quite nascent when compared to the long and rich history of NHC ligands in organometallic chemistry. In this work, well-established transmetalation reactions, previously developed for NHC transfer in homogeneous organometallic systems, are explored to determine how they can be used to create carbene functionalized gold surfaces. Two classes of NHCs, based on imidazole and benzimidazole scaffolds, were tested. The resulting AuNP surfaces were analyzed using X-ray photoelectron spectroscopy (XPS), laser desorption ionization mass spectrometry (LDI-MS), and surface-enhanced Raman spectroscopy (SERS). Reaction of either a Au( i ) or Ag( i ) isopropyl benzimidazole NHC complex with citrate-capped AuNPs yields, in both cases, a chemisorbed NHC that is bound through a Au adatom. Theoretical calculations additionally illustrate that binding through the Au adatom is favored by more than 10 kcal mol −1 , in good agreement with experiments. Surprisingly, reaction of Au( i ), Ag( i ), and Cu( i ) diisopropylphenyl imidazole NHCs do not follow the same pattern. The Cu complex undergoes transmetalation with very little deposition of Cu; whereas, unexpectedly, the Ag complex foregoes transmetalation and instead adducts to the AuNP with retention of the Ag–C bond. Theoretical calculations illustrate that the imidazole ligand affords significant dispersion interactions with the gold surface, which may stabilize binding through the Ag adatom motif, despite its less favorable bonding energies. Taken together these results suggest a unique ability to tune the reactivity by changing the carbene structure and raise critical questions about how established transmetalation reactions in organometallic chemistry can be applied to form NHC functionalized surfaces. 

   more » « less
4. Universal Cathode Design Strategies to Engineer Cathode Electrolyte Interfaces for High Performance All-Solid-State Batteries

   Zhang, Yuxuan ; Song, Han Wook ; Lee, Sunghwan ( May 2022 , Materials Research Society)

   Metal-ion batteries (e.g., lithium and sodium ion batteries) are the promising power sources for portable electronics, electric vehicles, and smart grids. Recent metal-ion batteries with organic liquid electrolytes still suffer from safety issues regarding inflammability and insufficient lifetime.1 As the next generation energy storage devices, all-solid-state batteries (ASSBs) have promising potentials for the improved safety, higher energy density, and longer cycle life than conventional Li-ion batteries.2 The nonflammable solid electrolytes (SEs), where only Li ions are mobile, could prevent battery combustion and explosion since the side reactions that cause safety issues as well as degradation of the battery performance are largely suppressed. However, their practical application is hampered by the high resistance arising at the solid–solid electrode–electrolyte interface (including cathode-electrolyte interface and anode-electrolyte interface).3 Several methods have been introduced to optimize the contact capability as well as the electrochemical/chemical stability between the metal anodes (i.e.: Li and Na) and the SEs, which exhibited decent results in decreasing the charge transfer resistance and broadening the range of the stable energy window (i.e., lowing the chemical potential of metal anode below the highest occupied molecular orbital of the SEs).4 Nevertheless, mitigation for the cathode in ASSB is tardily developed because: (1) the porous structure of the cathode is hard to be infiltrated by SEs;5 (2) SEs would be oxidized and decomposed by the high valence state elements at the surface of the cathode at high state of charge.5 Herein, we demonstrate a universal cathode design strategy to achieve superior contact capability and high electrochemical/chemical stability with SEs. Stereolithography is adopted as a manufacturing technique to realize a hierarchical three-dimensional (HTD) electrode architecture with micro-size channels, which is expected to provide larger contact areas with SEs. Then, the manufactured cathode is sintered at 700 °C in a reducing atmosphere (e.g.: H2) to accomplish the carbonization of the resin, delivering sufficiently high electronic conductivity for the cathode. To avoid the direct exposure of the cathode active materials to the SEs, oxidative chemical vapor deposition technique (oCVD) is leveraged to build conformal and highly conducting poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of the HTD cathode.6 To demonstrate our design strategy, both NCM811 and Na3V2(PO4)3 is selected as active materials in the HTD cathode, then each cathode is paired with organic (polyacrylonitrile-based) and inorganic (sulfur-based) SEs assembled into two batteries (total four batteries). SEM and TEM reveal the micro-size HTD structure with built-in channels. Featured by the HTD architecture, the intrinsic kinetic and thermodynamic conditions will be enhanced by larger surface contact areas, more active sites, improved infusion and electrolyte ion accessibility, and larger volume expansion capability. Disclosed by X-ray computed tomography, the interface between cathode and SEs in the four modified samples demonstrates higher homogeneity at the interface between the cathode and SEs than that of all other pristine samples. Atomic force microscopy is employed to measure the potential image of the cross-sectional interface by the peak force tapping mode. The average potential of modified samples is lower than that of pristine samples, which confirms a weakened space charge layer by the enhanced contact capability. In addition, through Electron Energy Loss Spectroscopy coupled with Scanning Transmission Electron Microscopy, the preserved interface between HTD cathode and SE is identified; however, the decomposing of the pristine cathode is clearly observed. In addition, Finite element method simulations validate that the diffusion dynamics of lithium ions is favored by HTD structure. Such a demonstrated universal strategy provides a new guideline to engineer cathode electrolyte interface by reconstructing electrode structures that can be applicable to all solid-state batteries in a wide range of chemical conditions. 

   more » « less
5. Enhancing the Stability of a Pt‐Free ORR Catalyst via Reaction Intermediates

   https://doi.org/10.1002/admi.202202132  

   Helsel, Naomi ; Choudhury, Pabitra ( February 2023 , Advanced Materials Interfaces)

   Finding a platinum‐free cathode catalyst that effectively models the oxygen reduction reaction (ORR) of a proton‐exchange membrane (PEM) fuel cell cathode better than the current commercial Pt/C catalyst has been a major shortcoming in fuel cell technology. Overall, a promising platinum‐free cathode catalyst must offer great ORR activity, ORR selectivity, and acid stability. Due to their enticing ORR activity and selectivity to the preferred four‐electron ORR pathway, the possible dissolution reactions and oxygen‐intermediate reactions of iron phthalocyanine monolayer supported on a pristine graphene (GFePc) and boron‐doped graphene substrate (BGFePc) have been studied to determine the stability as a function of potential and pH through spin‐polarized density functional theory (DFT) calculations at both infinitesimally low (10⁻⁹ m) and 1 mFe²⁺/Fe³⁺ionic concentrations. BGFePc offers higher stability in both concentrations than GFePc. In both cases, the oxygen‐intermediates are more stable than the bare catalytic surface due to the metal d‐band center shifting further away from the Fermi level in the valence band state (higher energy of antibonding). Moreover, at an Fe²⁺ionic concentration, both catalysts would be stable in the potential and pH regions at the operating conditions of rotating disk electrode (RDE) experiments and PEM fuel cells.

    

   more » « less