skip to main content

Explore Research Products in the NSF-PAR

Title: Nanoscale Structure of Langmuir–Blodgett Film of Bent-Core Molecules
Bent-core mesogens (BCMs) are a class of thermotropic liquid crystals featuring several unconventional properties. However, the interpretation and technological exploitation of their unique behavior have been hampered by the difficulty of controlling their anchoring at surfaces. To tackle this issue, we report the nanoscale structural characterization of BCM films prepared using the Langmuir–Blodgett technique. Even though BCMs are quite different from typical amphiphilic molecules, we demonstrate that stable molecular films form over water, which can then be transferred onto silicon substrates. The combination of Brewster angle microscopy, atomic force microscopy, and X-ray reflectivity measurements shows that the molecules, once transferred onto a solid substrate, form a bilayer structure with a bottom layer of flat molecules and an upper layer of upright molecules. These results suggest that Langmuir–Blodgett films of BCMs can provide a useful means to control the alignment of this class of liquid crystals.  more » « less
Award ID(s):
1709148
NSF-PAR ID:
10353896
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Nanomaterials
Volume:
12
Issue:
13
ISSN:
2079-4991
Page Range / eLocation ID:
2285
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ( , CrystEngComm)
    Reactivity trends for molecular solids cannot be explained exclusively through the topochemical phenomenon ( i.e. diffusivity, reaction cavities) or electronic structure of the molecules. As an example of this class, Diels–Alder reactions of small molecules with pentacene thin films are examined to elucidate the importance of surface phenomena to reactivity. Polarization modulation-infrared reflection–absorption spectroscopy (PM-IRRAS) has revealed that vapors from the small molecules condense on the surface, in a non-covalent manner, to form a coating 2–3 molecules thick. The phase of this layer can provide increased surface diffusion (both reactant and product) which rapidly accelerates the reaction rate. Kinetic studies of pentacene thin film reactions demonstrate the importance of this condensed state to trends in reactivity, with layers in a quasi-liquid state showing a rate acceleration of 13–30 times compared to those in a quasi-solid state. Scanning electron microscopy provides further evidence of this phase behavior, while solid-state UV-vis confirms the kinetic results. 
    more » « less
  2. ; ; ; ; ; ; ( , Advanced Materials)
    Abstract

    The flexible, transparent, and low‐weight nature of ferroelectric polymers makes them promising for wearable electronic and optical applications. To reach the full potential of the polarization‐enabled device functionalities, large‐scale fabrication of polymer thin films with well‐controlled polar directions is called for, which remains a central challenge. The widely exploited Langmuir–Blodgett, spin‐coating, and electrospinning methods only yield polymorphous or polycrystalline films, where the net polarization is compromised. Here, an easily scalable approach is reported to achieve poly(vinylidene fluoride‐trifluoroethylene) P(VDF‐TrFE) thin films composed of close‐packed crystalline nanowires via interface‐epitaxy with 1T′‐ReS2. Upon controlled thermal treatment, uniform P(VDF‐TrFE) films restructure into about 10 and 35 nm‐wide (010)‐oriented nanowires that are crystallographically aligned with the underlying ReS2, as revealed by high‐resolution transmission electron microscopy. Piezoresponse force microscopy studies confirm the out‐of‐plane polar axis of the nanowire films and reveal coercive voltages as low as 0.1 V. Reversing the polarization can induce a conductance switching ratio of >108in bilayer ReS2, over six orders of magnitude higher than that achieved by an untreated polymer gate. This study points to a cost‐effective route to large‐scale processing of high‐performance ferroelectric polymer thin films for flexible energy‐efficient nanoelectronics.

     
    more » « less
  3. ; ; ; ; ( , ChemNanoMat)
    Abstract

    The large‐scale fabrication of two‐dimensional periodic nanostructures in high quality holds great promises for building novel nanoscale devices. They have been conventionally produced using interface‐mediated self‐assembly strategies such as the Langmuir‐Blodgett and oil‐water interfacial assembly methods, which however are limited by the stringent requirements for the hydrophilicity/hydrophobicity of the particle surface. In this article, we review the recent progress on the air‐liquid interfacial self‐assembly to demonstrate that such strategies are simple, inexpensive, effective, scalable, and versatile in the fabrication of two‐dimensional periodic nanostructured arrays. They can be successfully employed to assemble nanoparticles of various compositions and surface properties into periodic nanostructured monolayer films, which find many important applications, for example, in the construction of colorimetric sensors for gas, chemical, and biomedical detection.

     
    more » « less
  4. ; ; ; ; ; ; ; ( , International Journal of Bioprinting)
    Matrix-assisted pulsed laser evaporation (MAPLE) has many benefits over conventional methods (e.g., dip-coating, spin coating, and Langmuir–Blodgett dip-coating) for manufacturing coatings containing pharmacologic agents on medical devices. In particular, the thickness of the coating that is applied to the surface of the medical device can be tightly controlled. In this study, MAPLE was used to deposit rapamycin-polyvinylpyrrolidone (rapamycin-PVP) thin films onto silicon and borosilicate optical glass substrates. Alamar Blue and PicoGreen studies were used to measure the metabolic health and DNA content of L929 mouse fibroblasts as measures of viability and proliferation, respectively. The cells on the MAPLE-deposited rapamycin-PVP surfaces exhibited 70.6% viability and 53.7% proliferation compared to a borosilicate glass control. These data indicate that the antiproliferative properties of rapamycin were maintained after MAPLE deposition. 
    more » « less
  5. ; ; ; ; ; ; ; ( , Science Advances)
    Semiconducting carbon nanotubes promise faster performance and lower power consumption than Si in field-effect transistors (FETs) if they can be aligned in dense arrays. Here, we demonstrate that nanotubes collected at a liquid/liquid interface self-organize to form two-dimensional (2D) nematic liquid crystals that globally align with flow. The 2D liquid crystals are transferred onto substrates in a continuous process generating dense arrays of nanotubes aligned within ±6°, ideal for electronics. Nanotube ordering improves with increasing concentration and decreasing temperature due to the underlying liquid crystal phenomena. The excellent alignment and uniformity of the transferred assemblies enable FETs with exceptional on-state current density averaging 520 μA μm −1 at only −0.6 V, and variation of only 19%. FETs with ion gel top gates demonstrate subthreshold swing as low as 60 mV decade −1 . Deposition across a 10-cm substrate is achieved, evidencing the promise of 2D nanotube liquid crystals for commercial semiconductor electronics. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email