skip to main content

This content will become publicly available on February 16, 2023

Title: A Wideband Stacked Patch-Patch Antenna with Hybrid Perturbations for Circular Polarization
This paper presents a wideband circularly polarized antenna for small satellites to be used with NASA Near- Earth Networks (NEN). This single-fed stacked antenna utilizes the electromagnetic coupling concept and is usable with a duplex transceiver. The circularly-polarized antenna employs hybrid perturbations on stacked patches and covers NASA NEN’s both uplink and downlink frequencies, thus replacing the conventional requirement of two separate antennas. It provides a notable wide axial ratio (AR) < 3 dB bandwidth of 1.16 GHz from 7.02 GHz to 8.18 GHz (15.3%). The optimized patch dimensions provide 34.6% VSWR ~ 2 bandwidth from 6,525 MHz to 9,253 MHz. The overall antenna size is 17 mm × 17 mm × 6.6 mm, and has a peak gain of 7.9 dBi. This proposed antenna will overcome solar cell space constraint on smallsat’s outer wall by saving at least 50% area required by the conventional two-antenna method.
Authors:
Award ID(s):
1936665
Publication Date:
NSF-PAR ID:
10354207
Journal Name:
2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI)
Sponsoring Org:
National Science Foundation
More Like this
  1. This paper presents the design of a dual-band printed planar antenna for deep space CubeSat communications. The antenna system will be used with a radio for duplex operation in a CubeSat, which can be used for a lunar mission or any deep space mission. While a high-gain CubeSat planar antenna/array is always desired for a deep space mission, high-performance ground stations are also required for robust communication links. For such a mission, the X-band is the appropriate frequency for the downlink communication, which is very challenging in the case of deep space communication compared to the uplink communication. At this frequency, the antenna size can have small enough dimension to form an array to obtain high-gain directional radiations for the successful communication, including telemetry and data download. NASA’s Deep Space Network (DSN) has the largest and most sensitive 70 meterdiameter antenna that can be considered for this type of mission for reliability. DSN has uplink and downlink frequency of operations in 7.1-GHz and 8.4-GHz bands, respectively, which are separated by approximately 1.3 GHz. A straight forward approach is to use two antennas to cover uplink and downlink frequencies. However, CubeSats have huge space constraints to accommodate science instruments and othermore »subsystems and commonly utilize outside faces for solar cells. Therefore, in this paper, we have proposed a planar directional circularly polarized antenna with a single feed that operates at both uplink and downlink DSN frequencies. Simulated 3-dB axial ratio bandwidth of 165 MHz, from 7064 MHz to 7229 MHz for uplink, and that of 183 MHz, from 8325 MHz to 8508 MHz for downlink, are achieved. Also, a wide impedance bandwidth of 23.86% (VSWR < 2) is obtained. From this single probe-fed stacked patch antenna, peak RHCP gain of 9.24 dBic can be achieved.« less
  2. A hybrid perturbation scheme is used in this article to achieve wide axial ratio (AR) bandwidth and beamwidth from circularly polarized (CP) microstrip patch–ring antennas using a single probe feed. Perturbations in the diagonal corners of a square ring and a square patch arranged in a stacked configuration are introduced to achieve the circular polarization. First, an enhanced AR bandwidth is obtained when a combination of a square ring and a square patch with negative perturbations is used as parasitic and driven elements, respectively. Next, circular polarization with wider AR bandwidth, wider beamwidth, and lower cross-polarization is obtained when a combination of a driven square patch with positive perturbation and a parasitic square ring with negative perturbations, termed as hybrid perturbations, is used. This antenna has a footprint suitable for small satellite applications (e.g., CubeSats) and its operating frequencies cover the allocated S-band downlink frequencies of NASA Deep Space Network and NASA Near Earth Network.
  3. Wireless networks at millimeter wavelengths have significant implementation difficulties. The path loss at these frequencies naturally leads us to consider antenna arrays with many elements. In these arrays, local oscillator (LO) generation is particularly challenging since the LO specifications affect the system architecture, signal processing design, and circuit implementation. We thoroughly analyze the effect of LO ar- chitecture design choices on the performance of a mm-wave massive MIMO uplink. This investigation focuses on the tradeoffs involved in centralized and distributed LO generation, correlated and uncorrelated phase noise sources, and the bandwidths of PLLs and carrier recovery loops. We show that, from both a performance and implementation complexity standpoint, the op- timal LO architecture uses several distributed subarrays locked to a single intermediate-frequency reference in the low GHz range. Additionally, we show that the choice of PLL and carrier recovery loop bandwidths strongly affects the performance; for typical system parameters, loop bandwidths on the order of tens of MHz achieve SINRs suitable for high-order constellations. Finally, we present system simulations incorporating a complete model of the LO generation system and consider the case of a 128-element array with 16x-spatial multiplexing and a 2 GHz channel bandwidth at 75 GHz carrier. Usingmore »our optimization procedure we show that the system can support 16-way spatial multiplexing with 64-QAM modulation.« less
  4. This paper demonstrates the design and implementation of two dual-polarized ultra-wideband antennas for radar ice sounding. The first antenna operates at UHF (600– 900 MHz). The second antenna operates at VHF (140–215 MHz). Each antenna element is composed of two orthogonal octagon-shaped dipoles, two inter-locked printed circuit baluns and an impedance matching network for each polarization. We built and tested one prototype antenna for each band and showed a VSWR of less than 2:1 at both polarizations over a fractional bandwidth exceeding 40 %. Our antennas display cross-polarization isolation larger than 30 dB, an E-plane 3-dB beamwidth of 69 degrees, and a gain of at least 4 dBi with a variation of ± 1 dB across the bandwidth. We demonstrate peak power handling capabilities of 400-W and 1000-W for the UHF and VHF bands, respectively. Our design flow allows for straightforward adjustment of the antenna dimensions to meet other bandwidth constraints.
  5. Microfluidically reconfigurable radio-frequency (RF) devices in general have been found attractive for low-loss, wide-frequency tunability and high-power-handling capabilities. Recently, integrated actuation of the microfluidically reconfigurable devices has been proposed for compact mm-wave device applications. This article for the first time introduces microfluidically reconfigurable frequency- and/or bandwidthtunable bandpass filters (BPFs) operated at the mm-wave band with integrated actuation. The BPFs consist of coupled hairpin resonators. Frequency tuning is achieved by capacitively loading the resonators. Bandwidth tuning is achieved by creating varying capacitive loading among the resonators to control the interresonator couplings. The capacitive loading mechanisms are realized using the selectively metallized plates (SMPs) that can be repositioned within the microfluidic channels. The microfluidic channels are located directly above the stationary metallizations of the filter. Piezoelectric bending actuators placed under the filter’s ground plane provide the SMP motion capability. The BPFs perform with the worst-case insertion loss of 3.1 dB. Frequency-tuning capable filters operate within 28–38-GHz band. Fractional bandwidth tunability varies from 7.8% to 16.7% at 38 GHz and 7.6% to 12.5% at 28 GHz for the filter that is capable of both tuning mechanisms. The filters are characterized to handle 5 W of the continuous RF power without needing thick groundmore »planes or heat sinks. In addition, the frequency-tuning speed is characterized to be 285 MHz/ms.« less