An official website of the United States government
Abstract Endoluminal devices are indispensable in medical procedures in the natural lumina of the body, such as the circulatory system and gastrointestinal tract. In current clinical practice, there is a need for increased control and capabilities of endoluminal devices with less discomfort and risk to the patient. This paper describes the detailed modeling and experimental validation of a magneto-electroactive endoluminal soft (MEESo) robot concept that combines magnetic and electroactive polymer (EAP) actuation to improve the utility of the device. The proposed capsule-like device comprises two permanent magnets with alternating polarity connected by a soft, low-power ionic polymer-metal composite (IPMC) EAP body. A detailed model of the MEESo robot is developed to explore quantitatively the effects of dual magneto-electroactive actuation on the robot’s performance. It is shown that the robot’s gait is enhanced, during the magnetically-driven gait cycle, with IPMC body deformation. The concept is further validated by creating a physical prototype MEESo robot. Experimental results show that the robot’s performance increases up to 68% compared to no IPMC body actuation. These results strongly suggest that integrating EAP into the magnetically-driven system extends the efficacy for traversing tract environments.
more »
« less
Modeling and Analysis of a Soft Endoluminal Inchworm Robot Propelled by a Rotating Magnetic Dipole Field
In clinical practice, therapeutic and diagnostic endoluminal procedures of the human body often use a scope, catheter, or passive pill-shaped camera. Unfortunately, such devices used in the circulatory system and gastrointestinal tract are often uncomfortable, invasive, and require the patient to be sedated. With current technology, regions of the body are often inaccessible to the clinician. Herein, a magnetically actuated soft endoluminal inchworm robot that may extend clinicians’ ability to reach further into the human body and practice new procedures is described, modeled, and analyzed. A detailed locomotion model is pro- posed that takes into account the elastic deformation of the robot and its interactions with the environment. The model is validated with in vitro and ex vivo (pig intestine) physical experiments and is shown to capture the robot’s gait characteristics through a lumen. Utilizing dimensional analysis, the effects of the mechanical properties and design variables on the robot’s motion are investigated further to advance the understanding of this endoluminal robot concept.
more »
« less
- Award ID(s):
- 1830958
- PAR ID:
- 10354516
- Date Published:
- Journal Name:
- Journal of mechanisms and robotics
- Volume:
- 14
- ISSN:
- 1942-4310
- Page Range / eLocation ID:
- 051002
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
As over 11,000 people turn 65 each day in the U.S., our country, like many others, is facing growing challenges in caring for elderly persons, further exacerbated by a major shortfall of care workers. To address this, we introduce an eldercare robot (E-BAR) capable of lifting a human body, assisting with postural changes/ambulation, and catching a user during a fall, all without the use of any wearable device or harness. Our robot is the first to integrate these 3 tasks, and is capable of lifting the full weight of a human outside of the robot’s base of support (across gaps and obstacles). In developing E-BAR, we interviewed nurses and care professionals and conducted user experience tests with elderly persons. Based on their functional requirements, the design parameters were optimized using a computational model and trade-off analysis. We developed a novel 18-bar linkage to lift a person from a floor to a standing position along a natural trajectory, while providing maximal mechanical advantage at key points. An omnidirectional, nonholonomic drive base, in which the wheels could be oriented to passively maximize floor grip, enabled the robot to resist lateral forces without active compensation. With a minimum width of 38 cm, the robot’s small footprint allowed it to navigate the typical home environment. Four airbags were used to catch and stabilize a user during a fall in ≤ 250 ms. We demonstrate E-BAR’s utility in multiple typical home scenarios, including getting into/out of a bathtub, bending to reach for objects, sit-to-stand transitions, and ambulation.more » « less
-
null (Ed.)Robots are increasingly being introduced into domains where they assist or collaborate with human counterparts. There is a growing body of literature on how robots might serve as collaborators in creative activities, but little is known about the factors that shape human perceptions of robots as creative collaborators. This paper investigates the effects of a robot’s social behaviors on people’s creative thinking and their perceptions of the robot. We developed an interactive system to facilitate collaboration between a human and a robot in a creative activity. We conducted a user study (n = 12), in which the robot and adult participants took turns to create compositions using tangram pieces projected on a shared workspace. We observed four human behavioral traits related to creativity in the interaction: accepting robot inputs as inspiration, delegating the creative lead to the robot, communicating creative intents, and being playful in the creation. Our findings suggest designs for co-creation in social robots that consider the adversarial effect of giving the robot too much control in creation, as well as the role playfulness plays in the creative process.more » « less
-
Abstract Simultaneous Localization and Mapping (SLAM) is an autonomous localization technique used for mobile robots without GPS. Since autonomous localization relies on pre-existing maps, to use SLAM with the Robotic Operating System (ROS), a map of the surroundings must first be created, and a controller can then use the initial map. The first mapping procedure is mostly carried out manually, with human intervention. When operating manually, the person operating the robot is responsible for avoiding obstacles and moving the robot to different sections of the space to create a full map of the entire environment. The mapping process, if done manually, is time demanding, and often not feasible. To solve this constraint, which is to construct a map of the environment autonomously without human involvement while avoiding obstacles, the Vector Field Histogram (VFH) technique is implemented in this study by integrating it with SLAM. VFH is a real-time motion planning approach in robotics that uses a statistical representation of the robot’s surroundings known as the histogram grid, to place a strong emphasis on handling modeling errors and sensor uncertainty. Furthermore, using range sensor values, the VFH algorithm determines a robot’s obstacle-free driving directions. Aside from its real-time obstacle avoidance function, the VFH method is enhanced in this study to collaborate with SLAM to create maps and reduce localization complexity. While generating maps, the VFH approach uses a two-step data-reduction procedure to calculate the appropriate vehicle control directives. The robot’s temporary location is used to generate a one-dimensional polar histogram, which is the first stage of the histogram grid reduction process. The polar obstacle density in a given direction is represented by a value in each sector of the polar histogram. In the second stage, the robot’s steering is oriented in the direction of the most appropriate sector, which the algorithm determines from all the polar histogram sectors with a low polar obstacle density. Following that, further algorithms, such as Rapidly Exploring Random Tree (RRT) and A*, can be used to plan autonomous pathways using the map provided by VFH. In order to put the concept into practice, MATLAB and ROS are used together in collaboration to autonomously and simultaneously map the environment and localize the robot. The combination of MATLAB and ROS provides many advantages because of their extensive feature set and ability to integrate with each other. Finally, a simulation and a real-time robot are utilized to analyze and validate the study’s findings.more » « less
-
Developing whole-body tactile skins for robots remains a challenging task, as existing solutions often prioritize modular, one-size-fits-all designs, which, while versatile, fail to account for the robot’s specific shape and the unique demands of its operational context. In this work, we introduce GenTact Toolbox, a computational pipeline for creating versatile wholebody tactile skins tailored to both robot shape and application domain. Our method includes procedural mesh generation for conforming to a robot’s topology, task-driven simulation to refine sensor distribution, and multi-material 3D printing for shape-agnostic fabrication. We validate our approach by creating and deploying six capacitive sensing skins on a Franka Research 3 robot arm in a human-robot interaction scenario. This work represents a shift from “one-size-fits-all” tactile sensors toward context-driven, highly adaptable designs that can be customized for a wide range of robotic systems and applications. The project website is available at https://hiro-group.ronc.one/gentacttoolboxmore » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/https://doi.org/10.1115/1.4053114
