Critical processes including seismic faulting, reservoir compartmentalization, and borehole failure involve high‐pressure mechanical behavior and strain localization of sedimentary rocks such as sandstone. Sand is often used as a model material to study the mechanical behavior of poorly lithified sandstone. Recent studies exploring the multi‐scale mechanics of sand have characterized the brittle, low‐pressure regime of behavior; however, limited work has provided insights into the ductile, high‐pressure regime of behavior via
- Award ID(s):
- 2042325
- NSF-PAR ID:
- 10355692
- Date Published:
- Journal Name:
- Rock Mechanics and Rock Engineering
- ISSN:
- 0723-2632
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract in‐situ measurements. Critical features of the ductile regime, including grain breakage, grain micromechanics, and volumetric strain behavior therefore remain under‐explored. Here, we use a new high‐pressure triaxial apparatus within‐situ x‐ray tomography to provide new insights into deformation banding, grain breakage, and grain micromechanics in Ottawa sand subjected to triaxial compression under confining pressures between 10 and 45 MPa. We observed strain‐hardening at pressures above 15 MPa and strain‐neutral responses at pressures below 15 MPa. Compacting shear bands and grain breakage were observed at all pressures with no significant variation due to grain size, except for minor increases in breakage in less‐rounded sands. Grain breakage emerged at stress levels lower than the assumed yield threshold and more intense breakage was associated with thinner deformation bands. Contact sliding at inter‐grain contacts demonstrated a bifurcation into a bimodal distribution, with intense sliding within deformation bands and reduced but non‐negligible sliding outside of deformation bands, suggesting that off‐band zones remain mechanically active during strain hardening. -
Test of the Effective Stress Law for Semibrittle Deformation Using Isostatic and Triaxial Load Pathsmore » « less
Abstract For brittle friction and rock deformation, the coefficient
α in the general effective stress relationσ e =σ −αP p can be approximated as unity with sufficient accuracy. However, it is uncertain ifα deviates from unity for semibrittle flow when both brittle and intracrystalline‐plastic deformation is involved. We conducted triaxial and isostatic compression experiments on synthetic salt‐rocks (∼300 ppm water) at room temperature to test the effective stress relation in the semibrittle regime using silicone oil and argon gas as pore fluids. Confining and pore pressures were cycled while their difference (differential pressure) was kept constant, such that changes in the mechanical behavior would indicate deviation ofα from unity. Microstructural observations were used to determine the dependence ofα on true area of grain contact from asperity yielding. In triaxial compression experiments, semibrittle flow involves grain boundary cracking and sliding, and intragranular dislocation glide and cracking. Flow strength remains constant for changes in pore fluid pressure of more than two orders of magnitude. In isostatic compression experiments, samples show combined processes of microcracking, grain boundary sliding, dislocation glide, and fluid‐assisted grain boundary migration recrystallization. Volumetric strain depends directly on the differential pressures (i.e.,α equals one). Analysis of grain‐contact area in both experiments indicates thatα is independent of the true area of contact defined by plastic yielding at grain boundaries. The observation ofα effectively equals one may be explained by operation of pressure‐independent intracrystalline‐plastic mechanisms and transmission of pore pressure at grain boundaries through thin fluid films. -
null (Ed.)Abstract. The continuum of behavior that emerges during fracturenetwork development in crystalline rock may be categorized into threeend-member modes: fracture nucleation, isolated fracture propagation, andfracture coalescence. These different modes of fracture growth producefracture networks with distinctive geometric attributes, such as clusteringand connectivity, that exert important controls on permeability and theextent of fluid–rock interactions. To track how these modes of fracturedevelopment vary in dominance throughout loading toward failure and thushow the geometric attributes of fracture networks may vary under theseconditions, we perform in situ X-ray tomography triaxial compressionexperiments on low-porosity crystalline rock (monzonite) under upper-crustalstress conditions. To examine the influence of pore fluid on the varyingdominance of the three modes of growth, we perform two experiments undernominally dry conditions and one under water-saturated conditions with 5 MPa ofpore fluid pressure. We impose a confining pressure of 20–35 MPa and thenincrease the differential stress in steps until the rock failsmacroscopically. After each stress step of 1–5 MPa we acquire athree-dimensional (3D) X-ray adsorption coefficient field from which weextract the 3D fracture network. We develop a novel method of trackingindividual fractures between subsequent tomographic scans that identifieswhether fractures grow from the coalescence and linkage of several fracturesor from the propagation of a single fracture. Throughout loading in all ofthe experiments, the volume of preexisting fractures is larger than that ofnucleating fractures, indicating that the growth of preexisting fracturesdominates the nucleation of new fractures. Throughout loading until close tomacroscopic failure in all of the experiments, the volume of coalescingfractures is smaller than the volume of propagating fractures, indicatingthat fracture propagation dominates coalescence. Immediately precedingfailure, however, the volume of coalescing fractures is at least double thevolume of propagating fractures in the experiments performed at nominallydry conditions. In the water-saturated sample, in contrast, although thevolume of coalescing fractures increases during the stage preceding failure,the volume of propagating fractures remains dominant. The influence ofstress corrosion cracking associated with hydration reactions at fracturetips and/or dilatant hardening may explain the observed difference infracture development under dry and water-saturated conditions.more » « less
-
more » « less
Abstract The spatial organization of deformation may provide key information about the timing of catastrophic failure in the brittle regime. In an ideal homogenous system, deformation may continually localize toward macroscopic failure, and so increasing localization unambiguously signals approaching failure. However, recent analyses demonstrate that deformation, including low‐magnitude seismicity, and fractures and strain in triaxial compression experiments, experience temporary phases of delocalization superposed on an overall trend of localization toward large failure events. To constrain the conditions that promote delocalization, we perform a series of X‐ray tomography experiments at varying confining pressures (5–20 MPa) and fluid pressures (0–10 MPa) on Westerly granite cores with varying amounts of preexisting damage. We track the spatial distribution of the strain events with the highest magnitudes of the population within a given time step. The results show that larger confining pressure promotes more dilation, and promotes greater localization of the high strain events approaching macroscopic failure. In contrast, greater amounts of preexisting damage promote delocalization. Importantly, the dilative strain experiences more systematic localization than the shear strain, and so may provide more reliable information about the timing of catastrophic failure than the shear strain.
-
more » « less
Abstract Soft‐sediment deformation of contorted and massive sandstone is common throughout much of the siliciclastic record, but clastic pipes represent a distinctive class of pressurized synsedimentary features. Remarkable centimetre to metre‐scale clastic pipe exposures in the Jurassic Navajo Sandstone of Utah (USA) establish a range of pipe sizes, expressions and relationships to the host rock in an erg margin setting, traditionally thought to be just a dry desert system. In particular, the field and laboratory characterizations of cylindrical pipes show internal concentric, annular rings that imply water fluidization, with alignment of long grain axes due to shear flow along pipe margins. Central interior parts of decimetre‐scale pipes appear massive in plan view, but display weakly developed pseudobedding from post‐pressure release, gravitational settling in the cross‐sectional view. Deformation features of conjugate fractures, ring faults, hypotrochoid patterns (geometric arcs and circles) and breccia in the host material reflect both brittle and ductile behaviour in response to the fluidization and injection of the clastic pipes. The stratigraphic context of individual pipes and the stratabound intervals of pipe features imply dynamic deformation nearly coincident with deposition in this Early Jurassic aeolian system related to multiple factors of groundwater expulsion, timing and local host sediment properties that influenced pipe development. Although the pipe features might be easily overlooked as a smaller scale feature of soft‐sediment deformation in dune deposits, these are valuable environmental indications of disrupted fluid pathways within porous, reservoir quality sands, associated with possible combinations of periodic springs, high water‐table conditions and strong ground‐motion events. These pipe examples may be important analogues where exposures are not so clear, with applications to diverse modern and ancient clastic settings internationally on Earth as well as in planetary explorations such as on Mars.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1007/s00603-022-02963-z
