skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Densified Pupil Spectrograph as High-precision Radial Velocimetry: From Direct Measurement of the Universe’s Expansion History to Characterization of Nearby Habitable Planet Candidates
Abstract The direct measurement of the universe’s expansion history and the search for terrestrial planets in habitable zones around solar-type stars require extremely high-precision radial-velocity measures over a decade. This study proposes an approach for enabling high-precision radial-velocity measurements from space. The concept presents a combination of a high-dispersion densified pupil spectrograph and a novel line-of-sight monitor for telescopes. The precision of the radial-velocity measurements is determined by combining the spectrophotometric accuracy and the quality of the absorption lines in the recorded spectrum. Therefore, a highly dispersive densified pupil spectrograph proposed to perform stable spectroscopy can be utilized for high-precision radial-velocity measures. A concept involving the telescope’s line-of-sight monitor is developed to minimize the change of the telescope’s line of sight over a decade. This monitor allows the precise measurement of long-term telescope drift without any significant impact on the Airy disk when the densified pupil spectra are recorded. We analytically derive the uncertainty of the radial-velocity measurements, which is caused by the residual offset of the lines of sight at two epochs. We find that the error could be reduced down to approximately 1 cm s −1 , and the precision will be limited by another factor (e.g., wavelength calibration uncertainty). A combination of the high-precision spectrophotometry and the high spectral resolving power could open a new path toward the characterization of nearby non-transiting habitable planet candidates orbiting late-type stars. We present two simple and compact highly dispersed densified pupil spectrograph designs for cosmology and exoplanet sciences.  more » « less
Award ID(s):
2107821
PAR ID:
10356103
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
The Astronomical Journal
Volume:
163
Issue:
2
ISSN:
0004-6256
Page Range / eLocation ID:
63
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The CO Mapping Array Project (COMAP) is a carbon monoxide (CO) line intensity mapping experiment using a 19-feed 26–34 GHz focal plane spectrometer array on a 10.4 m dish at the Owens Valley Radio Observatory. We are developing a water vapor radiometer (WVR) that continuously measures the temporal variability of the atmosphere’s water vapor content along the telescope’s line of sight to better calibrate the COMAP science data. The WVR is designed to monitor the rotational transition line of water vapor around 22.2 GHz, with a spectral measurement between 18 and 26 GHz and a measurement of continuum at 28–30 GHz. Here we describe the COMAP WVR instrument system. 
    more » « less
  2. The search for Earth-like exoplanets with the Doppler radial velocity (RV) technique is an extremely challenging and multifaceted precision spectroscopy problem. Currently, one of the limiting instrumental factors in reaching the required long-term 10−10level of radial velocity precision is the defect-driven subpixel quantum efficiency (QE) variations in the large-format detector arrays used by precision echelle spectrographs. Tunable frequency comb calibration sources that can fully map the point spread function (PSF) across a spectrograph’s entire bandwidth are necessary for quantifying and correcting these detector artifacts. In this work, we demonstrate a combination of laser frequency and mode spacing control that allows full and deterministic tunability of a 30 GHz electro-optic comb together with its filter cavity. After supercontinuum generation, this gives access to any optical frequency across 700–1300 nm. Our specific implementation is intended for the comb deployed at the Habitable-Zone Planet Finder (HPF) spectrograph and its near-infrared Hawaii-2RG array, but the techniques apply to all laser frequency combs (LFCs) used for precision astronomical spectrograph calibration and other applications that require broadband tuning. 
    more » « less
  3. null (Ed.)
    ABSTRACT Until the recent advent of Gaia Data Release 2 (DR2) and deep multi-object spectroscopy, it has been difficult to obtain 6D phase space information for large numbers of stars beyond 4 kpc, in particular towards the Galactic Centre, where dust and crowding are significant. We combine line-of-sight velocities from the Abundances and Radial velocity Galactic Origins Survey (ARGOS) with proper motions from Gaia DR2 to obtain a sample of ∼7000 red clump stars with 3D velocities. We perform a large-scale stellar kinematics study of the Milky Way bulge to characterize the bulge velocity ellipsoids in 20 fields. The tilt of the major-axis of the velocity ellipsoid in the radial-longitudinal velocity plane, or vertex deviation, is characteristic of non-axisymmetric systems and a significant tilt is a robust indicator of non-axisymmetry or bar presence. We compare the observations to the predicted kinematics of an N-body boxy-bulge model formed from dynamical instabilities. In the model, the lv values are strongly correlated with the angle (α) between the bulge major-axis and the Sun-Galactic centre line of sight. We use a maximum likelihood method to obtain an independent measurement of α, from bulge stellar kinematics alone, performing a robust error analysis. The most likely value of α given our model is α = (29 ± 3)○, with an additional systematic uncertainty due to comparison with one specific model. In Baade’s window, the metal-rich stars display a larger vertex deviation (lv = −40○) than the metal-poor stars (lv = 10○) but we do not detect significant lv−metallicity trends in the other fields. 
    more » « less
  4. Abstract In this study, we investigate interstellar absorption lines along the line of sight toward the galactic low-mass X-ray binary Cygnus X-2. We combine absorption line data obtained from high-resolution X-ray spectra collected with the Chandra and XMM-Newton satellites, along with far-UV absorption lines observed by the Hubble Space Telescope’s (HST) Cosmic Origins Spectrograph (COS) instrument. Our primary objective is to understand the abundance and depletion of oxygen, iron, sulfur, and carbon. To achieve this, we have developed an analysis pipeline that simultaneously fits both the UV and X-ray data sets. This novel approach takes into account the line-spread function of HST/COS, enhancing the precision of our results. We examine the absorption lines of Feii, Sii, Cii, and Cipresent in the far-UV spectrum of Cygnus X-2, revealing the presence of at least two distinct absorbers characterized by different velocities. Additionally, we employCloudysimulations to compare our findings concerning the ionic ratios for the studied elements. We find that gaseous iron and sulfur exist in their singly ionized forms, Feiiand Sii, respectively, while the abundances of Ciiand Cido not agree with the Cloudy simulations of the neutral ISM. Finally, we explore discrepancies in the X-ray atomic data of iron and discuss their impact on the overall abundance and depletion of iron. 
    more » « less
  5. Abstract In the coming decade, thousands of stellar streams will be observed in the halos of external galaxies. What fundamental discoveries will we make about dark matter from these streams? As a first attempt to look at these questions, we model Magellan/Megacam imaging of the Centaurus A (Cen A) disrupting dwarf companion Dwarf 3 (Dw3) and its associated stellar stream, to find out what can be learned about the Cen A dark matter halo. We develop a novel external galaxy stream-fitting technique and generate model stellar streams that reproduce the stream morphology visible in the imaging. We find that there are many viable stream models that fit the data well, with reasonable parameters, provided that Cen A has a halo mass larger than M 200 > 4.70 × 10 12 M ⊙ . There is a second stream in Cen A’s halo that is also reproduced within the context of this same dynamical model. However, stream morphology in the imaging alone does not uniquely determine the mass or mass distribution for the Cen A halo. In particular, the stream models with high likelihood show covariances between the inferred Cen A mass distribution, the inferred Dw3 progenitor mass, the Dw3 velocity, and the Dw3 line-of-sight position. We show that these degeneracies can be broken with radial-velocity measurements along the stream, and that a single radial velocity measurement puts a substantial lower limit on the halo mass. These results suggest that targeted radial-velocity measurements will be critical if we want to learn about dark matter from extragalactic stellar streams. 
    more » « less