An official website of the United States government
ABSTRACT Batteries are prevalent energy storage devices, and their failures can cause huge losses such as the shutdown of entire systems. Therefore, the prognostic health management of batteries to increase their availability is highly desirable. This work focuses on improving the serviceability of batteries for wireless sensor networks (WSNs) deployed in remote and hard‐to‐reach places. We propose an active management strategy such that the batteries in a network will attain similar end‐of‐life times, in addition to lifetime extension. The fundamental idea is to adaptively adjust the node quality‐of‐service (QoS) to actively manage their degradation processes, while ensuring a minimum level of network QoS. The framework first executes a prognostic algorithm that can predict the remaining useful life (RUL) of a battery, given its assigned node‐level QoS. A Bayesian optimization framework with an augmented Lagrangian method has been adopted to efficiently solve the developed black‐box constrained optimization problem. A Matlab Simulink model based on a truss bridge structure health monitoring network is built considering the battery aging and temperature effects. Compared with the benchmark models, the proposed strategy demonstrates a more extended network lifespan and uniform working time ratio.
more »
« less
Accelerated Battery Lifetime Simulations Using Adaptive Inter-Cycle Extrapolation Algorithm
We propose algorithms to speed up physics-based battery lifetime simulations by one to two orders of magnitude compared to the state-of-the-art. First, we propose a reformulation of the Single Particle Model with side reactions to remove algebraic equations and hence reduce stiffness, with 3x speed-up in simulation time (intra-cycle reformulation). Second, we introduce an algorithm that makes use of the difference between the “fast” timescale of battery cycling and the “slow” timescale of battery degradation by adaptively selecting and simulating representative cycles, skipping other cycles, and hence requires fewer cycle simulations to simulate the entire lifetime (adaptive inter-cycle extrapolation). This algorithm is demonstrated with a specific degradation mechanism but can be applied to various models of aging phenomena. In the particular case study considered, simulations of the entire lifetime are performed in under 5 s. This opens the possibility for much faster and more accurate model development, testing, and comparison with experimental data.
more »
« less
- Award ID(s):
- 1762247
- PAR ID:
- 10361067
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 168
- Issue:
- 12
- ISSN:
- 0013-4651
- Page Range / eLocation ID:
- Article No. 120531
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Wang, Dong (Ed.)Lithium-ion batteries have been extensively used to power portable electronics, electric vehicles, and unmanned aerial vehicles over the past decade. Aging decreases the capacity of Lithium-ion batteries. Therefore, accurate remaining useful life (RUL) prediction is critical to the reliability, safety, and efficiency of the Lithium-ion battery-powered systems. However, battery aging is a complex electrochemical process affected by internal aging mechanisms and operating conditions (e.g., cycle time, environmental temperature, and loading condition). In this paper, a physics-informed machine learning method is proposed to model the degradation trend and predict the RUL of Lithium-ion batteries while accounting for battery health and operating conditions. The proposed physics-informed long short-term memory (PI-LSTM) model combines a physics-based calendar and cycle aging (CCA) model with an LSTM layer. The CCA model measures the aging effect of Lithium-ion batteries by combining five operating stress factor models. The PI-LSTM uses an LSTM layer to learn the relationship between the degradation trend determined by the CCA model and the online monitoring data of different cycles (i.e., voltage, current, and cell temperature). After the degradation pattern of a battery is estimated by the PI-LSTM model, another LSTM model is then used to predict the future degradation and remaining useful life (RUL) of the battery by learning the degradation trend estimated by the PI-LSTM model. Monitoring data of eleven Lithium-ion batteries under different operating conditions was used to demonstrate the proposed method. Experimental results have shown that the proposed method can accurately model the degradation behavior as well as predict the RUL of Lithium-ion batteries under different operating conditions.more » « less
-
Autonomous mobile robots (AMRs) are capable of carrying out operations continuously for 24/7, which enables them to optimize tasks, increase throughput, and meet demanding operational requirements. To ensure seamless and uninterrupted operations, an effective coordination of task allocation and charging schedules is crucial while considering the preservation of battery sustainability. Moreover, regular preventive main- tenance plays an important role in enhancing the robustness of AMRs against hardware failures and abnormalities during task execution. However, existing works do not consider the influence of properly scheduling AMR maintenance on both task downtime and battery lifespan. In this paper, we propose MTC, a maintenance-aware task and charging scheduler designed for fleets of AMR operating continuously in highly automated envi- ronments. MTC leverages Linear Programming (LP) to first help decide the best time to schedule maintenance for a given set of AMRs. Subsequently, the Kuhn-Munkres algorithm, a variant of the Hungarian algorithm, is used to finalize task assignments and carry out the charge scheduling to minimize the combined cost of task downtime and battery degradation. Experimental results demonstrate the effectiveness of MTC, reducing the combined total cost up to 3.45 times and providing up to 68% improvement in battery capacity degradation compared to the baselines.more » « less
-
In this paper, we develop parameter-robust numerical algorithms for Biot model and apply the algorithms in brain edema simulations. By introducing an intermediate variable, we derive a multiphysics reformulation of the Biot model. Based on the reformulation, the Biot model is viewed as a generalized Stokes subproblem combining with a reaction–diffusion subproblem. Solving the two subproblems together or separately leads to a coupled or a decoupled algorithm. We conduct extensive numerical experiments to show that the two algorithms are robust with respect to the key physical parameters. The algorithms are applied to study the brain swelling caused by abnormal accumulation of cerebrospinal fluid in injured areas. The effects of the key physical parameters on brain swelling are carefully investigated. It is observed that the permeability has the biggest influence on intracranial pressure (ICP) and tissue deformation; the Young’s modulus and the Poisson ratio do not affect the maximum value of ICP too much but have big influence on the tissue deformation and the developing speed of brain swelling.more » « less
-
Abstract Developing fast‐charging, high‐temperature, and sustainable batteries is critical for the large‐scale deployment of energy storage devices in electric vehicles, grid‐scale electrical energy storage, and high temperature regions. Here, a transition metal‐free all‐organic rechargeable potassium battery (RPB) based on abundant and sustainable organic electrode materials (OEMs) and potassium resources for fast‐charging and high‐temperature applications is demonstrated. N‐doped graphene and a 2.8 m potassium hexafluorophosphate (KPF6) in diethylene glycol dimethyl ether (DEGDME) electrolyte are employed to mitigate the dissolution of OEMs, enhance the electrode conductivity, accommodate large volume change, and form stable solid electrolyte interphase in the all‐organic RPB. At room temperature, the RPB delivers a high specific capacity of 188.1 mAh g−1at 50 mA g−1and superior cycle life of 6000 and 50000 cycles at 1 and 5 A g−1, respectively, demonstrating an ultra‐stable and fast‐charging all‐organic battery. The impressive performance at room temperature is extended to high temperatures, where the high‐mass‐loading (6.5 mg cm−2) all‐organic RPB exhibits high‐rate capability up to 2 A g−1and a long lifetime of 500 cycles at 70–100 °C, demonstrating a superb fast‐charging and high‐temperature battery. The cell configuration demonstrated in this work shows great promise for practical applications of sustainable batteries at extreme conditions.more » « less
