An official website of the United States government
Abstract Much like passive materials, active systems can be affected by the presence of imperfections in their microscopic order, called defects, that influence macroscopic properties. This suggests the possibility to steer collective patterns by introducing and controlling defects in an active system. Here we show that a self-assembled, passive nematic is ideally suited to control the pattern formation process of an active fluid. To this end, we force microtubules to glide inside a passive nematic material made from actin filaments. The actin nematic features self-assembled half-integer defects that steer the active microtubules and lead to the formation of macroscopic polar patterns. Moreover, by confining the nematic in circular geometries, chiral loops form. We find that the exact positioning of nematic defects in the passive material deterministically controls the formation and the polarity of the active flow, opening the possibility of efficiently shaping an active material using passive defects.
more »
« less
Gravitropically Stabilized Self‐Assembly of Active Microcrystallites and Spinning Free Janus Particles
Abstract Active colloidal microcrystallites capable of generating flow patterns around or through their porous network are introduced, which in combination with “free microspheres,” create self‐assembled active clusters with multiple moving parts. Fluid flow draws microspheres within a microcrystallite's local environment toward—and aggregate at—the edge of the microcrystallite, where the previously translational movement transitions to continuous spinning. These experiments show that the spinning frequency decreases with an increase in diameter and that when the center of mass of a spinning particle is shifted off‐center—here Janus spheres—a time‐varying angular frequency is observed. Weight‐anisotropy also leads to a particularly intriguing phenomenon, which manifests as the spontaneous realignment of the rotational axis to a preferential direction; this effect is attributed to a gravitropic self‐correcting mechanism. Thus, the dynamics of the self‐assembled active structure remains stable over long time periods, despite being subjected to significant noise, for example, Brownian forces.
more »
« less
- Award ID(s):
- 1847670
- PAR ID:
- 10361473
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Particle & Particle Systems Characterization
- Volume:
- 39
- Issue:
- 1
- ISSN:
- 0934-0866
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Microsphere photolithography (MPL) is an alternative low-cost technique for the large-scale fabrication of periodic structures, such as metasurfaces. This technique utilizes the photonic nanojet generated in the photoresist (PR), by microspheres in near proximity, which are exposed to collimated ultraviolet (UV) flood illumination. In the basic approach, a microsphere array is self-assembled on, or transferred to, the substrate prior to exposure. After exposure, the microspheres are washed away in the development step. The process to recover and clean these microspheres for reuse is complicated. This paper investigates the use of reusable microsphere masks created by fixing the microspheres on a UV transparent support. This is then brought into contact with the photoresist with controlled pressure. There is a trade-off between the quality of the fabricated samples and the wear of the mask determined by the contact pressure. The system is demonstrated using a digital micromirror device (DMD)-based direct-write exposure system to fabricate infrared (IR) metasurfaces. These metasurfaces are characterized and compared to simulation models. Finally, a series of 50 hierarchically patterned IR metasurfaces was fabricated using a single reusable mask. These samples had a <3% coefficient of variance when viewed with a thermal camera. This work shows the potential of mask-based MPL and other contact microlens array-based photolithography techniques for low-cost large-scale fabrication.more » « less
-
Abstract The frequency dependence of electrokinetic particle trapping using large‐area (>mm2) conductive carbon nanofiber (CNF) mat electrodes is investigated. The fibers provide nanoscale geometric features for the generation of high electric field gradients, which is necessary for particle trapping via dielectrophoresis (DEP). A device was fabricated with an array of microfluidic wells for repeated experiments; each well included a CNF mat electrode opposing an aluminum electrode. Fluorescent microspheres (1 µm) were trapped at various electric field frequencies between 30 kHz and 1 MHz. Digital images of each well were analyzed to quantify particle trapping. DEP trapping by the CNF mats was greater at all tested frequencies than that of the control of no applied field, and the greatest trapping was observed at a frequency of 600 kHz, where electrothermal flow is more significantly weakened than DEP. Theoretical analysis and measured impedance spectra indicate that this result was due to a combination of the frequency dependence of DEP and capacitive behavior of the well‐based device.more » « less
-
Abstract Based on computational modeling, the interaction between catalyst-coated surfaces and flexible micro-to-mesoscale two-dimensional (2D) sheets in solution promotes the self-organization of individual sheets into complex three-dimensional (3D) dynamic forms, including intertwined, self-spinning structures, coupled oscillators and motile, shape-shifting layers. These findings can hasten the development of active, reconfigurable interfaces needed for human–machine interactions. Furthermore, one sheet that autonomously reconfigures into multiple 3D shapes is beneficial for manufacturing, reducing the need to fabricate a new structure for each separate application. More generally, because the flexible 2D sheets display greater degrees of freedom than the previously studied hard zero-dimensional and one-dimensional particles, these elastic layers can reveal new, dynamic behavior in chemically active systems. Graphical abstractmore » « less
-
Here, we use magnetically driven self-assembled achiral swimmers made of two to four superparamagnetic micro-particles to provide insight into how swimming kinematics develop in complex, shear-thinning fluids. Two model shear-thinning polymer fluids are explored, where measurements of swimming dynamics reveal contrasting propulsion kinematics in shear-thinning fluids vs a Newtonian fluid. When comparing the velocity of achiral swimmers in polymer fluids to their dynamics in water, we observe kinematics dependent on (1) no shear-thinning, (2) shear-thinning with negligible elasticity, and (3) shear-thinning with elasticity. At the step-out frequency, the fluidic environment's viscoelastic properties allow swimmers to propel faster than their Newtonian swimming speed, although their swimming gait remains similar. Micro-particle image velocimetry is also implemented to provide insight into how shear-thinning viscosity fluids with elasticity can modify the flow fields of the self-assembled magnetic swimmers. Our findings reveal that flow asymmetry can be created for symmetric swimmers through either the confinement effect or the Weissenberg effect. For pseudo-chiral swimmers in shear-thinning fluids, only three bead swimmers show swimming enhancement, while four bead swimmers always have a decreased step-out frequency velocity compared to their dynamics in water.more » « less
