An official website of the United States government
Abstract Non‐volatile resistive switching (NVRS) is a widely available effect in transitional metal oxides, colloquially known as memristors, and of broad interest for memory technology and neuromorphic computing. Until recently, NVRS was not known in other transitional metal dichalcogenides (TMDs), an important material class owing to their atomic thinness enabling the ultimate dimensional scaling. Here, various monolayer or few‐layer 2D materials are presented in the conventional vertical structure that exhibit NVRS, including TMDs (MX2, M=transitional metal, e.g., Mo, W, Re, Sn, or Pt; X=chalcogen, e.g., S, Se, or Te), TMD heterostructure (WS2/MoS2), and an atomically thin insulator (h‐BN). These results indicate the universality of the phenomenon in 2D non‐conductive materials, and feature low switching voltage, large ON/OFF ratio, and forming‐free characteristic. A dissociation–diffusion–adsorption model is proposed, attributing the enhanced conductance to metal atoms/ions adsorption into intrinsic vacancies, a conductive‐point mechanism supported by first‐principle calculations and scanning tunneling microscopy characterizations. The results motivate further research in the understanding and applications of defects in 2D materials.
more »
« less
Sulfurization Engineering of One‐Step Low‐Temperature MoS 2 and WS 2 Thin Films for Memristor Device Applications
Abstract 2D materials have been of considerable interest as new materials for device applications. Non‐volatile resistive switching applications of MoS2and WS2have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large‐area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one‐step sulfurization method to synthesize MoS2and WS2at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO2/Si substrates is achieved. Following this, MoS2and WS2memristors are fabricated that exhibit stable non‐volatile switching and a satisfactory large on/off current ratio (103–105) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. The demonstration of large‐scale MoS2and WS2memristors with a one‐step low‐temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.
more »
« less
- Award ID(s):
- 1720595
- PAR ID:
- 10362511
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Electronic Materials
- Volume:
- 8
- Issue:
- 2
- ISSN:
- 2199-160X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract 2D memristors have demonstrated attractive resistive switching characteristics recently but also suffer from the reliability issue, which limits practical applications. Previous efforts on 2D memristors have primarily focused on exploring new material systems, while damage from the metallization step remains a practical concern for the reliability of 2D memristors. Here, the impact of metallization conditions and the thickness of MoS2films on the reliability and other device metrics of MoS2‐based memristors is carefully studied. The statistical electrical measurements show that the reliability can be improved to 92% for yield and improved by ≈16× for average DC cycling endurance in the devices by reducing the top electrode (TE) deposition rate and increasing the thickness of MoS2films. Intriguing convergence of switching voltages and resistance ratio is revealed by the statistical analysis of experimental switching cycles. An “effective switching layer” model compatible with both monolayer and few‐layer MoS2, is proposed to understand the reliability improvement related to the optimization of fabrication configuration and the convergence of switching metrics. The Monte Carlo simulations help illustrate the underlying physics of endurance failure associated with cluster formation and provide additional insight into endurance improvement with device fabrication optimization.more » « less
-
Abstract Nanohybrids based on van der Waals (vdW) heterostructures of two dimensional (2D) atomic materials have recently emerged as a unique scheme for designing high‐performance quantum sensors. This work explores vdW nanohybrids for photodetection, which consist of graphene decorated with intermingled transition‐metal dichalcogenide (TMDC) nanodiscs (TMDC‐NDs) obtained using wafer‐size, layer‐by‐layer growth. The obtained TMDC‐NDs/graphene nanohybrids take advantage of strong quantum confinement in graphene for high charge mobility and hence high photoconductive gain, and localized surface plasmonic resonance (LSPR) enabled on the TMDC‐NDs for enhanced light absorption. Since the LSPR depends on the nanostructure's size and density, intermingled TMDC‐NDs of different kinds of TMDCs, such as WS2(W) and MoS2(M), have been found to allow small‐size, high‐concentration TMDC‐NDs to be achieved for high photoresponse. Remarkably, high photoresponsivity up to 31 A/W (550 nm wavelength and 20 µW cm−2light intensity) has been obtained on the WMW‐NDs/graphene nanohybrids photodetectors made using three consecutive coatings of WS2(1st and 3rd coating) and MoS2(2nd coating), which is considerably higher by a factor of ≈4 than that of the counterparts MoS2‐ND/graphene or WS2‐NDs/graphene devices. This result provides a facile approach to control the size and concentration of the TMDC‐NDs for high‐performance, low‐cost optoelectronic device applications.more » « less
-
Low temperature synthesis of high quality two-dimensional (2D) materials directly on flexible substrates remains a fundamental limitation towards scalable realization of robust flexible electronics possessing the unique physical properties of atomically thin structures. Herein, we describe room temperature sputtering of uniform, stoichiometric amorphous MoS 2 and subsequent large area (>6.25 cm 2 ) photonic crystallization of 5 nm 2H-MoS 2 films in air to enable direct, scalable fabrication of ultrathin 2D photodetectors on stretchable polydimethylsiloxane (PDMS) substrates. The lateral photodetector devices demonstrate an average responsivity of 2.52 μW A −1 and a minimum response time of 120 ms under 515.6 nm illumination. Additionally, the surface wrinkled, or buckled, PDMS substrate with conformal MoS 2 retained the photoconductive behavior at tensile strains as high as 5.72% and over 1000 stretching cycles. The results indicate that the photonic crystallization method provides a significant advancement in incorporating high quality semiconducting 2D materials applied directly on polymer substrates for wearable and flexible electronic systems.more » « less
-
Resistive switching devices are promising candidates for the next generation of nonvolatile memory and neuromorphic computing applications. Despite the advantages in retention and on/off ratio, filamentary-based memristors still suffer from challenges, particularly endurance (flash being a benchmark system showing 104to 106 cycles) and uniformity. Here, we use WO3as a complementary metal-oxide semiconductor–compatible switching oxide and demonstrate a proof-of-concept materials design approach to enhance endurance and device-to-device uniformity in WO3-based memristive devices while preserving other performance metrics. These devices show stable resistive switching behavior with >106 cycles, >105-second retention, >10 on/off ratio, and good device-to-device uniformity, without using current compliance. All these metrics are achieved using a one-step pulsed laser deposition process to create self-assembled nanocomposite thin films that have regular guided filaments of ≈100-nanometer pitch, preformed between WO3grains and interspersed smaller Ce2O3grains.more » « less
