An official website of the United States government
Abstract Thermoplastic elastomers (TPEs) are nanostructured, melt‐processable, elastomeric block copolymers. When TPEs that form cylindrical or lamellar nanostructures are macroscopically oriented, their material properties can exhibit several orders of magnitude of anisotropy. Here it is demonstrated that the flows applied during the 3D printing of a cylinder‐forming TPE enable hierarchical control over material nanostructure and function. It is demonstrated that 3D printing allows for control over the extent of nanostructural and mechanical anisotropy and that thermal annealing of 3D printed structures leads to highly anisotropic properties (up to 85 × anisotropic tensile modulus). This approach is leveraged to print functional soft 3D architectures with tunable local and macroscopic mechanical responses. Further, these printed TPEs intrinsically achieve melt‐reprocessability over multiple cycles, reprogrammability, and robust self‐healing via a brief period of thermal annealing, enabling facile fabrication of highly tunable, robust, and recyclable soft architectures.
more »
« less
One‐Step Synthesis of Lignin‐Based Triblock Copolymers as High‐Temperature and UV‐Blocking Thermoplastic Elastomers
Abstract This work utilizes frustrated Lewis pairs consisting of tethered bis‐organophosphorus superbases and a bulky organoaluminum to furnish the highly efficient synthesis of well‐defined triblock copolymers via one‐step block copolymerization of lignin‐based syringyl methacrylate andn‐butyl acrylate, through di‐initiation and compounded sequence control. The resulting thermoplastic elastomers (TPEs) exhibit microphase separation and much superior mechanical properties (elongation at break up to 2091 %, tensile strength up to 11.5 MPa, and elastic recovery up to 95 % after 10 cycles) to those of methyl methacrylate‐based TPEs. More impressively, lignin‐based tri‐BCPs can maintain TPEs properties up to 180 °C, exhibit high transparency and nearly 100 % UV shield, suggesting potential applications in temperature‐resistant and optical devices.
more »
« less
- Award ID(s):
- 1904962
- PAR ID:
- 10362662
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie International Edition
- Volume:
- 61
- Issue:
- 8
- ISSN:
- 1433-7851
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Supersoft Norbornene‐Based Thermoplastic Elastomers with High Strength and Upper Service TemperatureAbstract With over 6 million tons produced annually, thermoplastic elastomers (TPEs) have become ubiquitous in modern society, due to their unique combination of elasticity, toughness, and reprocessability. Nevertheless, industrial TPEs display a tradeoff between softness and strength, along with low upper service temperatures, typically ≤100 °C. This limits their utility, such as in bio‐interfacial applications where supersoft deformation is required in tandem with strength, in addition to applications that require thermal stability (e.g., encapsulation of electronics, seals/joints for aeronautics, protective clothing for firefighting, and biomedical devices that can be subjected to steam sterilization). Thus, combining softness, strength, and high thermal resistance into a single versatile TPE has remained an unmet opportunity. Through de novo design and synthesis of novel norbornene‐basedABAtriblock copolymers, this gap is filled. Ring‐opening metathesis polymerization is employed to prepare TPEs with an unprecedented combination of properties, including skin‐like moduli (<100 kPa), strength competitive with commercial TPEs (>5 MPa), and upper service temperatures akin to high‐performance plastics (≈260 °C). Furthermore, the materials are elastic, tough, reprocessable, and shelf stable (≥2 months) without incorporation of plasticizer. Structure–property relationships identified herein inform development of next‐generation TPEs that are both biologically soft yet thermomechanically durable.more » « less
-
Abstract Lignin is an aromatic‐rich biomass polymer that is cheap, abundant, and sustainable. However, its application in the solid electrolyte field is rare due to challenges in well‐defined polymer synthesis. Herein, the synthesis of lignin‐graft‐poly(ethylene glycol) (PEG) and its conductivity test for a solid electrolyte application are demonstrated. The main steps of synthesis include functionalization of natural lignin's hydroxyl to alkene, followed by graft‐copolymerization of PEG thiol to the lignin via photoredox thiol‐ene reaction. Two lignin‐graft‐PEGs are prepared having 22 wt% lignin (lignin‐graft‐PEG 550) and 34 wt% lignin (lignin‐graft‐PEG 2000). Then, new polymer electrolytes for conductivity tests are prepared via addition of lithium bis‐trifluoromethanesulfonimide. The polymer graft electrolytes exhibit ionic conductivity up to 1.4 × 10−4 S cm−1 at 35 °C. The presence of lignin moderately impacts conductivity at elevated temperature compared to homopolymer PEG. Furthermore, the ionic conductivity of lignin‐graft‐PEG at ambient temperature is significantly higher than homopolymer PEG precedents.more » « less
-
Abstract Integrating multidisciplinary research in plant genetic engineering and renewable deep eutectic solvents (DESs) can facilitate a sustainable and economic biorefinery. Herein, we leveraged a plant genetic engineering approach to specifically incorporate C6C1monomers into the lignin structure. By expressing the bacterialubiCgene in sorghum,p‐hydroxybenzoic acid (PB)‐rich lignin was incorporated into the plant cell wall while this monomer was completely absent in the lignin of the wild‐type (WT) biomass. A DES was synthesized with choline chloride (ChCl) and PB and applied to the pretreatment of the PB‐rich mutant biomass for a sustainable biorefinery. The release of fermentable sugars was significantly enhanced (∼190 % increase) compared to untreated biomass by the DES pretreatment. In particular, the glucose released from the pretreated mutant biomass was up to 12 % higher than that from the pretreated WT biomass. Lignin was effectively removed from the biomass with the preservation of more than half of the β‐Ο‐4 linkages without condensed aromatic structures. Hydrogenolysis of the fractionated lignin was conducted to demonstrate the potential of phenolic compound production. In addition, a simple hydrothermal treatment could selectively extract PB from the same engineered lignin, showing a possible circular biorefinery. These results suggest that the combination of PB‐based DES and engineered PB‐rich biomass is a promising strategy to achieve a sustainable closed‐loop biorefinery.more » « less
-
Abstract Lignin is the most abundant natural source of aromatics but remains underutilized. Elemental sulfur is a plentiful by-product of fossil fuel refining. Herein we report a strategy for preparing a durable composite by the one-pot reaction of elemental sulfur and lignin oil comprising lower molecular weight lignin derivatives. A lignin oil-sulfur composite (LOS90) was prepared by reacting 10 wt. % lignin oil with 90 wt. % elemental sulfur. The composite could be remelted and reshaped over several cycles without loss of properties. Results from the study showed thatLOS90has properties competitive with or exceeding values for commercial ordinary Portland cement and brick formulations. For example,LOS90displayed impressive compressive strength (22.1 MPa) and flexural strength (5.7 MPa).LOS90is prepared entirely from waste materials with 98.5% atom economy of composite synthesis, a lowEfactor of 0.057, and lignin char as the only waste product of the process for its preparation. These results suggest the potential applications of lignin and waste sulfur in the continuous efforts to develop more recyclable and sustainable materials.more » « less
