skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Vacancy Energetics and Diffusivities in the Equiatomic Multielement Nb-Mo-Ta-W Alloy
In this work, we study vacancy energetics in the equiatomic Nb-Mo-Ta-W alloy, especially vacancy formation and migration energies, using molecular statics calculations based on a spectral neighbor analysis potential specifically developed for Nb-Mo-Ta-W. We consider vacancy properties in bulk environments as well as near edge dislocation cores, including the effect of short-range order (SRO) by preparing supercells through Metropolis Monte-Carlo relaxations and temperature on the calculation. The nudged elastic band (NEB) method is applied to study vacancy migration energies. Our results show that both vacancy formation energies and vacancy migration energies are statistically distributed with a wide spread, on the order of 1.0 eV in some cases, and display a noticeable dependence on SRO. We find that, in some cases, vacancies can form with very low energies at edge dislocation cores, from which we hypothesize the formation of stable ‘superjogs’ on edge dislocation lines. Moreover, the large spread in vacancy formation energies results in an asymmetric thermal sampling of the formation energy distribution towards lower values. This gives rise to effective vacancy formation energies that are noticeably lower than the distribution averages. We study the effect that this phenomenon has on the vacancy diffusivity in the alloy and discuss the implications of our findings on the structural features of Nb-Mo-Ta-W.  more » « less
Award ID(s):
1905822
PAR ID:
10362789
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Materials
Volume:
15
Issue:
15
ISSN:
1996-1944
Page Range / eLocation ID:
5468
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Nanoscale)
    The effects of short-range order (SRO) on defect behaviors in high entropy alloys with examples of vacancy migration and dislocation slip. SRO introduces excess energies that are not present in random alloys which impacts the defect metallurgy. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract High-entropy alloys (HEAs) provide new research avenues for alloy combinations in the periodic table, opening numerous possibilities in novel-alloy applications. However, their electrical characteristics have been relatively underexplored. The challenge in establishing an HEA electrical conductivity model lies in the changes in electronic characteristics caused by lattice distortion and complexity of nanostructures. Here we show a low-frequency electrical conductivity model for the Nb-Mo-Ta-W HEA system. The cocktail effect is found to explain trends in electrical-conductivity changes in HEAs, while the magnitude of the reduction is understood by the calculated plasma frequency, free electron density, and measured relaxation time by terahertz spectroscopy. As a result, the refractory HEA Nb15Mo35Ta15W35thin film exhibits both high hardness and excellent conductivity. This combination of Nb15Mo35Ta15W35makes it suitable for applications in atomic force microscopy probe coating, significantly improving their wear resistance and atomic-scale image resolution. 
    more » « less
  3. ; ; ; ; ; ; ; (, Metallurgical and Materials Transactions A)
    Creep strength in polycrystalline Ni-based superalloys is influenced by the formation of a rich variety of planar faults forming within the strengthening γ' phase. The lengthening and thickening rate of these faults – and therefore the creep rate – depends on an intriguing combination of dislocation interactions at the γ/γ' interface and diffusional processes of the alloying elements at the core of the fault tip. The effect of alloy composition on this process is not fully understood. In this work we use correlative high resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy to study the deformation faults in two different Ni-based superalloys with carefully designed ratios of disordering-to-ordering-promoting elements (Co-Cr against Nb-Ta-Ti). The results show that the additions of ordering-promoting elements reduce the diffusional processes required for the faults to lengthen and thicken thus reducing the creep rates found for the higher Nb-Ta-Ti alloy. These insights provide a path to follow in the design of improved grades of creep-resistant polycrystalline alloys beyond 700 °C. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Energy efficiency is motivating the search for new high-temperature (high-T) metals. Some new body-centered-cubic (BCC) random multicomponent “high-entropy alloys (HEAs)” based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional strengths at high temperatures but the physical origins of this outstanding behavior are not known. Here we show, using integrated in-situ neutron-diffraction (ND), high-resolution transmission electron microscopy (HRTEM), and recent theory, that the high strength and strength retention of a NbTaTiV alloy and a high-strength/low-density CrMoNbV alloy are attributable to edge dislocations. This finding is surprising because plastic flows in BCC elemental metals and dilute alloys are generally controlled by screw dislocations. We use the insight and theory to perform a computationally-guided search over 10 7 BCC HEAs and identify over 10 6 possible ultra-strong high-T alloy compositions for future exploration. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Advanced Electronic Materials)
    Abstract Memristors have emerged as transformative devices to enable neuromorphic and in‐memory computing, where success requires the identification and development of materials that can overcome challenges in retention and device variability. Here, high‐entropy oxide composed of Zr, Hf, Nb, Ta, Mo, and W oxides is first demonstrated as a switching material for valence change memory. This multielement oxide material provides uniform distribution and higher concentration of oxygen vacancies, limiting the stochastic behavior in resistive switching. (Zr, Hf, Nb, Ta, Mo, W) high‐entropy‐oxide‐based memristors manifest the “cocktail effect,” exhibiting comparable retention with HfO2‐ or Ta2O5‐based memristors while also demonstrating the gradual conductance modulation observed in WO3‐based memristors. The electrical characterization of these high‐entropy‐oxide‐based memristors demonstrates forming‐free operation, low device and cycle variability, gradual conductance modulation, 6‐bit operation, and long retention which are promising for neuromorphic applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email