Natural white silk cocoons exhibit strong broadband optical scattering by Anderson localization within the silk fibers, providing a low‐light environment to the pupae inside. This scattering effect is due to thousands of densely packed parallel fibrillar nanovoids running within each fiber along the fiber axis. Herein, to enhance sunlight rejection from white silk, conventional diffusive optical transport without Anderson localization is used. For optical diffusion, natural white silk is restructured by electrospinning to destroy the fibrillar nanovoids. Sunlight rejection power of the electrospun structures is controlled by the fiber diameters. Relative to a nonwoven raw silk fabric, a restructured silk film with a mean fiber diameter of a quarter micron substantially increases optical scattering strength in the visible spectrum and emissivity in the mid‐infrared atmospheric transparency window. The restructured silk fibrous film can reduce the average temperature of a substrate, on which the film is coated, by 7.5 °C relative to a nonwoven raw silk fabric during daytime under solar radiation. The results suggest that artificially processed polymeric fiber mats can achieve substantially stronger sunlight rejection than natural silk, by using optical diffusion without Anderson localization. These polymeric mats are useful as sunshades in various applications.
Scales of
- NSF-PAR ID:
- 10369301
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optical Materials Express
- Volume:
- 12
- Issue:
- 7
- ISSN:
- 2159-3930
- Page Range / eLocation ID:
- Article No. 2529
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
Inverse Design of Plasmonic Nanohole Arrays by Combing Spectra and Structural Color in Deep Learningmore » « less
Herein, deep learning (DL) is used to predict the structural parameters of Ag nanohole arrays (NAs) for spectrum‐driving and color‐driving plasmonic applications. A dataset of transmission spectra and structural parameters of NAs is generated using finite‐difference time‐domain (FDTD) calculations and is converted to vivid structural colors using the corresponding transmission spectrum. A bidirectional neural network is used to train the transmission spectrum and structural color together. The accuracy of predicting the structural parameters using a desired spectrum is tested and found to be up to 0.99, with a determination coefficient of reproducing the desired spectrum and color to be 0.97 and 0.96, respectively. These values are higher compared to those when only training for spectrum, but requiring less training time. This strategy is able to inverse design the NAs in less than 1 s to maximize surface‐enhanced Raman scattering (SERS) enhancement by matching transmission resonance and laser excitation wavelength, and accurately regenerate colored images in 7.5 s, allowing for nanoscale printing at a resolution of approximately 100 000 dots in−1. This work has important implications for the efficient design of nanostructures for various plasmonic applications, such as plasmonic sensors, optical filters, metal‐enhanced fluorescence, SERS, and super‐resolution displays.
-
more » « less
Abstract Subwavelength periodic confinement can collectively and selectively enhance local light intensity and enable control over the photoinduced phase transformations at the nanometer scale. Standard nanofabrication process can result in geometrical and compositional inhomogeneities in optical phase change materials, especially chalcogenides, as those materials exhibit poor chemical and thermal stability. Here the self‐assembled planar chalcogenide nanostructured array is demonstrated with resonance‐enhanced light emission to create an all‐dielectric optical metasurface, by taking advantage of the fluid properties associated with solution‐processed films. A patterned silicon membrane serves as a template for shaping the chalcogenide metasurface structure. Solution‐processed arsenic sulfide metasurface structures are self‐assembled in the suspended 250 nm silicon membrane templates. The periodic nanostructure dramatically manifests the local light–matter interaction such as absorption of incident photons, Raman emission, and photoluminescence. Also, the thermal distribution is modified by the boundaries and thus the photothermal crystallization process, leading to the formation of anisotropic nanoemitters within the field enhancement area. This hybrid structure shows wavelength‐selective anisotropic photoluminescence, which is a characteristic behavior of the collective response of the resonant‐guided modes in a periodic nanostructure. The resonance‐enhanced Purcell effect can manifest the quantum efficiency of localized light emission.
-
Abstract The anisotropy of hexagonal boron nitride (hBN) gives rise to hyperbolic phonon-polaritons (HPhPs), notable for their volumetric frequency-dependent propagation and strong confinement. For frustum (truncated nanocone) structures, theory predicts five, high-order HPhPs, sets, but only one set was observed previously with far-field reflectance and scattering-type scanning near-field optical microscopy. In contrast, the photothermal induced resonance (PTIR) technique has recently permitted sampling of the full HPhP dispersion and observing such elusive predicted modes; however, the mechanism underlying PTIR sensitivity to these weakly-scattering modes, while critical to their understanding, has not yet been clarified. Here, by comparing conventional contact- and newly developed tapping-mode PTIR, we show that the PTIR sensitivity to those weakly-scattering, high-Q (up to ≈280) modes is, contrary to a previous hypothesis, unrelated to the probe operation (contact or tapping) and is instead linked to PTIR ability to detect tip-launched dark, volumetrically-confined polaritons, rather than nanostructure-launched HPhPs modes observed by other techniques. Furthermore, we show that in contrast with plasmons and surface phonon-polaritons, whose Q -factors and optical cross-sections are typically degraded by the proximity of other nanostructures, the high- Q HPhP resonances are preserved even in high-density hBN frustum arrays, which is useful in sensing and quantum emission applications.more » « less
-
more » « less
Summary Structural color is poorly known in plants relative to animals. In fruits, only a handful of cases have been described, including in
Viburnum tinus where the blue color results from a disordered multilayered reflector made of lipid droplets. Here, we examine the broader evolutionary context of fruit structural color across the genusViburnum .We obtained fresh and herbarium fruit material from 30
Viburnum species spanning the phylogeny and used transmission electron microscopy, optical simulations, and ancestral state reconstruction to identify the presence/absence of photonic structures in each species, understand the mechanism producing structural color in newly identified species, relate the development of cell wall structure to reflectance inViburnum dentatum , and describe the evolution of cell wall architecture acrossViburnum .We identify at least two (possibly three) origins of blue fruit color in
Viburnum in species which produce large photonic structures made of lipid droplets embedded in the cell wall and which reflect blue light.Examining the full spectrum of mechanisms producing color in pl, including structural color as well as pigments, will yield further insights into the diversity, ecology, and evolution of fruit color.
