Searching for materials with room‐temperature electric‐field control of magnetism has interested researchers for many years with three‐dimensional perovskite BiFeO3‐based compounds as the main focus. Here we choose the layered hybrid improper ferroelectric Ruddlesden‐Popper oxides as a platform from which to realize electric field controllable magnetism, leveraging a recently identified strain tunable polar‐to‐nonpolar (P‐NP) transition. We first propose a design principle for selecting the required A and B cation chemistries that will ensure (001) A3B2O7films exhibit P‐NP transitions, which we substantiate with density functional calculations. By extending the guideline to B‐site ordered A3BB′O7oxides, we identify more compounds exhibiting P‐NP transitions marked by the disappearance of an in‐plane polarization that can be functionalized. We then demonstrate that weak ferromagnetism can be tuned by an electric field at the boundary of the P‐NP transition in B‐site ordered (001) A3BB′O7magnetic films, based on which we predict that cation ordered Ca3TcTiO7may be a viable candidate for room‐temperature electric‐field control of magnetism.
The layered perovskite Ca3Mn2O7(CMO) is a hybrid improper ferroelectric candidate proposed for room temperature multiferroicity, which also displays negative thermal expansion behavior due to a competition between coexisting polar and nonpolar phases. However, little is known about the atomic-scale structure of the polar/nonpolar phase coexistence or the underlying physics of its formation and transition. In this work, we report the direct observation of double bilayer polar nanoregions (db-PNRs) in Ca2.9Sr0.1Mn2O7using aberration-corrected scanning transmission electron microscopy (S/TEM). In-situ TEM heating experiments show that the db-PNRs can exist up to 650 °C. Electron energy loss spectroscopy (EELS) studies coupled with first-principles calculations demonstrate that the stabilization mechanism of the db-PNRs is directly related to an Mn oxidation state change (from 4+ to 2+), which is linked to the presence of Mn antisite defects. These findings open the door to manipulating phase coexistence and achieving exotic properties in hybrid improper ferroelectric.
more » « less- NSF-PAR ID:
- 10370295
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Next‐generation electronics and energy technologies can now be developed as a result of the design, discovery, and development of novel, environmental friendly lead (Pb)‐free ferroelectric materials with improved characteristics and performance. However, there have only been a few reports of such complex materials’ design with multi‐phase interfacial chemistry, which can facilitate enhanced properties and performance. In this context, herein, novel lead‐free piezoelectric materials (1‐
x )Ba0.95Ca0.05Ti0.95Zr0.05O3‐(x )Ba0.95Ca0.05Ti0.95Sn0.05O3, are reported, which are represented as (1‐x )BCZT‐(x )BCST, with demonstrated excellent properties and energy harvesting performance. The (1‐x )BCZT‐(x )BCST materials are synthesized by high‐temperature solid‐state ceramic reaction method by varyingx in the full range (x = 0.00–1.00). In‐depth exploration research is performed on the structural, dielectric, ferroelectric, and electro‐mechanical properties of (1‐x )BCZT‐(x )BCST ceramics. The formation of perovskite structure for all ceramics without the presence of any impurity phases is confirmed by X‐ray diffraction (XRD) analyses, which also reveals that the Ca2+, Zr4+, and Sn4+are well dispersed within the BaTiO3lattice. For all (1‐x )BCZT‐(x )BCST ceramics, thorough investigation of phase formation and phase‐stability using XRD, Rietveld refinement, Raman spectroscopy, high‐resolution transmission electron microscopy (HRTEM), and temperature‐dependent dielectric measurements provide conclusive evidence for the coexistence of orthorhombic + tetragonal (Amm2 +P4mm ) phases at room temperature. The steady transition ofAmm2 crystal symmetry toP4mm crystal symmetry with increasingx content is also demonstrated by Rietveld refinement data and related analyses. The phase transition temperatures, rhombohedral‐orthorhombic (TR‐O), orthorhombic‐ tetragonal (TO‐T), and tetragonal‐cubic (TC), gradually shift toward lower temperature with increasingx content. For (1‐x )BCZT‐(x )BCST ceramics, significantly improved dielectric and ferroelectric properties are observed, including relatively high dielectric constantε r≈ 1900–3300 (near room temperature),ε r≈ 8800–12 900 (near Curie temperature), dielectric loss, tanδ ≈ 0.01–0.02, remanent polarizationP r≈ 9.4–14 µC cm−2, coercive electric fieldE c≈ 2.5–3.6 kV cm−1. Further, high electric field‐induced strainS ≈ 0.12–0.175%, piezoelectric charge coefficientd 33≈ 296–360 pC N−1, converse piezoelectric coefficient ≈ 240–340 pm V−1, planar electromechanical coupling coefficientk p≈ 0.34–0.45, and electrostrictive coefficient (Q 33)avg≈ 0.026–0.038 m4C−2are attained. Output performance with respect to mechanical energy demonstrates that the (0.6)BCZT‐(0.4)BCST composition (x = 0.4) displays better efficiency for generating electrical energy and, thus, the synthesized lead‐free piezoelectric (1‐x )BCZT‐(x )BCST samples are suitable for energy harvesting applications. The results and analyses point to the outcome that the (1‐x )BCZT‐(x )BCST ceramics as a potentially strong contender within the family of Pb‐free piezoelectric materials for future electronics and energy harvesting device technologies. -
Abstract Knowledge about phase transitions in doped HfO2and ZrO2‐based films is crucial for developing future ferroelectric devices. These devices should perform in ambient temperature ranges with no degradation of device performance. Here, the phase transition from the polar orthorhombic to the nonpolar tetragonal phase in thin films is of significant interest. Detailed electrical and structural characterization is performed on 10 nm mixed HfxZr1‐xO2binary oxides with different ZrO2in HfO2and small changes in oxygen content. Both dopant and oxygen content directly impact the phase transition temperature between the polar and nonpolar phase. A first‐order phase transition with thermal hysteresis is observed from the nonpolar to the polar phase with a maximum in the dielectric constant. The observed phase transition temperatures confirm trends as obtained by DFT calculations. Based on the outcome of the measurements, the classification of the ferroelectric material is discussed.
-
Abstract Originally based on phenomenological observations, the Janovec–Kay–Dunn (JKD) scaling law has been historically used to describe the dependence of the ferroelectric coercive fields (
E c ) on a critical length scale of the material, wherein the film thickness (t ) is considered the length scale, andE c ∝t −2/3. Here, for the first time, a JKD‐type scaling behavior is reported in an antiferroelectric material, using the ultra‐thin films of prototypical flourite‐structure binary oxide, zirconia. In these films, a decrease in the ZrO2layer thickness from 20 nm to 5.4 nm leads to an increase in critical fields for both nonpolar‐to‐polar (E a ), and polar‐to‐nonpolar (E f ) transitions, accompanied by a decrease in the average crystallite size, and an increase in the tetragonal distortion of the non‐polarP 42/nmc ground state structure. Notably, the ‐2/3 power law as in the JKD law holds when average crystallite size (d ), measured from glancing‐incident X‐ray diffraction, is considered as the critical length scale—i .e .,E a ,E f ∝d −2/3. First principles calculations suggest that the increase of tetragonality in thinner films contributes to an increase of the energy barrier for the transition from the non‐polar tetragonal ground state to the field‐induced polar orthorhombic phase, and in turn, an increase inE a critical fields. These results suggest a de‐stabilization of the ferroelectric phase with a decreasing thickness in antiferroelectric ZrO2, which is contrary to the observations in its fluorite‐structure ferroelectric counterparts. With the recent interests in utilizing antiferroelectricity for advanced semiconductor applications, our fundamental exposition of the thickness dependence of functional responses therein can accelerate the development of miniaturized, antiferroelectric electronic memory elements for the complementary metal‐oxide‐semiconductor based high‐volume manufacturing platforms. -
Advances in creating polar structures in atomic‐layered hafnia‐zirconia (Hf
x Zr1−x O2) films not only augurs extensive growth in studying ferroelectric nanoelectronics and neuromorphic devices, but also spurs opportunities for exploring novel integrated nanoelectromechanical systems (NEMS). Design and implementation of Hfx Zr1−x O2NEMS transducers necessitates accurate knowledge of elastic and electromechanical properties. Up to now, all experimental approaches for extraction of morphological content, elastic, and electromechanical properties of Hfx Zr1−x O2are based on solidly mounted structures, highly stressed films, and electroded architectures. Unlike Hfx Zr1−x O2layers embedded in electronics, NEMS transducers require free‐standing structures with highly contrasted mechanical boundaries and stress profiles. Here, a nanoresonator‐based approach for simultaneous extraction of Young's modulus and residual stress in free‐standing ferroelectric Hf0.5Zr0.5O2films is presented. High quality factor resonance modes of nanomechanical resonators created in predominantly orthorhombic Hf0.5Zr0.5O2films are measured using nondestructive optical transduction. Further, the evolution of morphology during creation of free‐standing Hf0.5Zr0.5O2structures is closely mapped using X‐ray diffraction measurements, clearly showing transformation of ferroelectric orthorhombic to nonpolar monoclinic phase upon stress relaxation. The extracted Young's modulus of 320.0 ± 29.4 GPa and residual stress ofσ = 577.4 ± 24.1 MPa show the closest match with theoretical calculations for orthorhombic Hf0.5Zr0.5O2.