skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: The Geochemistry of Englacial Brine From Taylor Glacier, Antarctica
Abstract Blood Falls is a hypersaline, iron‐rich discharge at the terminus of the Taylor Glacier in the McMurdo Dry Valleys, Antarctica. In November 2014, brine in a conduit within the glacier was penetrated and sampled using clean‐entry techniques and a thermoelectric melting probe called the IceMole. We analyzed the englacial brine sample for filterable iron (fFe), total Fe, major cations and anions, nutrients, organic carbon, and perchlorate. In addition, aliquots were analyzed for minor and trace elements and isotopes including δD and δ18O of water, δ34S and δ18O of sulfate,234U,238U, δ11B,87Sr/86Sr, and δ81Br. These measurements were made in order to (1) determine the source and geochemical evolution of the brine and (2) compare the chemistry of the brine to that of nearby hypersaline lake waters and previous supraglacially sampled collections of Blood Falls outflow that were interpreted asend‐memberbrines. The englacial brine had higher Clconcentrations than the Blood Falls end‐member outflow; however, other constituents were similar. The isotope data indicate that the water in the brine is derived from glacier melt. The H4SiO4concentrations and U and Sr isotope suggest a high degree of chemical weathering products. The brine has a low N:P ratio of ~7.2 with most of the dissolved inorganic nitrogen in the form of NH4+. Dissolved organic carbon concentrations are similar to end‐member outflow values. Our results provide strong evidence that the original source of solutes in the brine was ancient seawater, which has been modified with the addition of chemical weathering products.  more » « less
Award ID(s):
1637708
PAR ID:
10371536
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Biogeosciences
Volume:
124
Issue:
3
ISSN:
2169-8953
Page Range / eLocation ID:
p. 633-648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Basaltic watersheds such as those found in Iceland are thought to be important sites of CO2sequestration via silicate weathering. However, determining the magnitude of CO2uptake depends on accurately interpreting river chemistry. Here, we compile geochemical data from Iceland and use them to constrain weathering processes. Specifically, we use a newly developed inverse model to quantify solute supply from rain and hydrothermal fluids as well as allow for variable silicate end‐member compositions, solutes to be removed via secondary phase formation, and some Ca to be sourced from carbonate dissolution. While some of these processes have been considered previously, they have not been considered together allowing us to newly determine their relative contributions. We find that weathering in Iceland is incongruent in two ways. First, solute release from primary silicates is characterized by a higher proportion of Na than would be expected from bulk basalts, which may reflect preferential weathering or some contribution from rhyolites. This Na enrichment is further enhanced by preferential Mg and K uptake by secondary phases. No samples in our data set (n = 537) require carbonate dissolution even if isotopic data (δ26Mg,δ30Si,δ44Ca, and/or87Sr/86Sr) are included. While some carbonate weathering is allowable, silicate weathering likely dominates. The complexity we observe in Iceland underscores the need for inverse models to account for a wide range of processes and end‐members. Given that riverine fluxes from Iceland are more Na‐rich than expected for congruent basalt weathering, the characteristic timescale of CO2drawdown is likely affected. 
    more » « less
  2. Abstract The biogeochemistry of rapidly retreating Andean glaciers is poorly understood, and Ecuadorian glacier dissolved organic matter (DOM) composition is unknown. This study examined molecular composition and carbon isotopes of DOM from supraglacial and outflow streams (n = 5 and 14, respectively) across five ice capped volcanoes in Ecuador. Compositional metrics were paired with streamwater isotope analyses (δ18O) to assess if outflow DOM composition was associated with regional precipitation gradients and thus an atmospheric origin of glacier DOM. Ecuadorian glacier outflows exported ancient, biolabile dissolved organic carbon (DOC), and DOM contained a high relative abundance (RA) of aliphatic and peptide‐like compounds (≥27%RA). Outflows were consistently more depleted in Δ14C‐DOC (i.e., older) compared to supraglacial streams (mean −195.2 and −61.3‰ respectively), perhaps due to integration of spatially heterogenous and variably aged DOM pools across the supraglacial environment, or incorporation of aged subglacial OM as runoff was routed to the outflow. Across Ecuador, Δ14C‐DOC enrichment was associated with decreased aromaticity of DOM, due to increased contributions of organic matter (OM) from microbial processes or atmospheric deposition of recently fixed and subsequently degraded OM (e.g., biomass burning byproducts). There was a regional gradient between glacier outflow DOM composition and streamwater δ18O, suggesting covariation between regional precipitation gradients and the DOM exported from glacier outflows. Ultimately, this highlights that atmospheric deposition may exert a control on glacier outflow DOM composition, suggesting regional air circulation patterns and precipitation sources in part determine the origins and quality of OM exported from glacier environments. 
    more » « less
  3. Abstract Inorganic aragonite occurs in a wide spectrum of depositional environments and its precipitation is controlled by complex physio‐chemical factors. This study investigates diagenetic conditions that led to aragonite cement precipitation in Cenozoic glaciomarine deposits of McMurdo Sound, Antarctica. A total of 42 sandstones that host intergranular cement were collected from theCIROS‐1 core, located proximal to the terminus of Ferrar Glacier. Standard petrography, Raman spectroscopy and electron microprobe analysis reveal a prominent aragonite cement phase that occurs as a pore‐filling blocky fabric throughout the core. Oxygen isotope compositions (δ18O = −30·0 to −8·6‰ Vienna Pee‐Dee Belemnite) and clumped isotope temperatures (TΔ47 = 13·1 to 31·5°C) determined from the aragonite cements provide precise constraints on isotopic compositions (δ18Ow) of the parent fluid, which mostly range from −10·8 to −7·2‰ Vienna Standard Mean Ocean Water. The fluidδ18Owvalues are consistent with those of pore water, previously identified as cryogenic brine in the nearbyAND‐2A core. Petrographic and geochemical data suggest that aragonite cement in theCIROS‐1 core precipitated from a similar brine. The brine likely formed and infiltrated sediments in flooded glacial valleys along the western margin of McMurdo Sound during the middle Miocene Climatic Transition, and subsequently flowed basinward in the subsurface. Consequently, the brine forms as a longstanding subsurface fluid that has saturated Cenozoic sediments below southern McMurdo Sound since at least the middle Miocene. Aragonite cementation in theCIROS‐1 core is interpreted to reflect its proximal position to sites of brine formation and greater likelihood of experiencing brines with sustained high carbonate saturation states and Mg/Ca ratios. This unusual occurrence expands the range of known natural occurrences of aragonite cement. Given the potential for cryogenic brine formation in glaciomarine settings, blocky aragonite, as the end member of the spectrum of aragonite cement morphology, may be more widespread in glaciomarine sediments than currently thought. 
    more » « less
  4. Early diagenetic forward and reverse weathering reactions play a significant role in controlling alkalinity fluxes and silica, alkali metal and alkaline earth metal cycling in coastal systems. In Kongsfjorden, Svalbard, the inputs of autochthonous biogenic debris (diatomaceous silica) and allochthonous lithogenic material of varying reactivity (dominated by clays, especially illite and chlorite, and primary aluminosilicates, mostly plagioclase) drive complex balances of diagenetic silicate reactions in sediments. The rapid dissolution of reactive silica results in the release of dissolved silica (Sid) into pore‐waters and sustains elevated benthic Sidfluxes (−0.2 to −0.8 mmol m−2 d−1), which are on the upper end of values previously determined for Arctic environments. Increases with depth in pore‐water lithium (Li+), potassium, magnesium, and barium concentrations within the top centimeters provided evidence for forward weathering of clays quickly upon burial. Due to the prevalent occurrence of forward weathering, the benthic net Li+flux was associated with a light isotope signal. Decreases in pore‐water rubidium concentrations with depth at the near‐glacier station, elevated ratios of the authigenically altered silica to the biogenic silica pool at all sites, and small increases of pore‐water δ7Li values with depth showed that reverse weathering also takes place. Anoxic incubation of diatom frustule probes provided further evidence for the neoformation of cation‐rich clays. The superposition of reverse and forward weathering results in cryptic silica and cation cycling that muted net benthic fluxes. In deeper sediments, changes in pore‐water solute patterns indicated an interconnected occurrence of reverse and forward weathering, potentially driven by reactive silica‐limitation. 
    more » « less
  5. Abstract The stable isotope ratio of dissolved inorganic carbon (δ13C‐DIC) is a valuable tracer for investigating carbon cycling in aquatic environments. However, its potential remains underutilized due to limited data availability. Fewer than 15% of cruise samples are analyzed forδ13C‐DIC, as isotope analysis using isotope ratio mass spectrometry is labor‐intensive and restricted to onshore laboratories. We present over 3500δ13C‐DIC measurements from the 2023 Global Ocean Ship‐based Hydrographic Investigations Program A16N cruise in the North Atlantic. Notably, three‐quarters of these measurements were conducted onboard using a CO2extraction device coupled with cavity ring‐down spectroscopy, a more efficient and cost‐effective method. This extensive dataset providesδ13C‐DIC values with spatial resolution comparable to other ocean carbonate chemistry and biogeochemical parameters. This dataset supports improved quantification of anthropogenic CO2uptake and storage, and may facilitate the development of algorithms to estimateδ13C‐DIC in under sampled regions. 
    more » « less