An official website of the United States government
Traditionally, precipitates in a material are thought to serve as obstacles to dislocation glide and cause hardening of the material. This conventional wisdom, however, fails to explain recent discoveries of ultrahigh-strength and large-ductility materials with a high density of nanoscale precipitates, as obstacles to dislocation glide often lead to high stress concentration and even microcracks, a cause of progressive strain localization and the origin of the strength–ductility conflict. Here we reveal that nanoprecipitates provide a unique type of sustainable dislocation sources at sufficiently high stress, and that a dense dispersion of nanoprecipitates simultaneously serve as dislocation sources and obstacles, leading to a sustainable and self-hardening deformation mechanism for enhanced ductility and high strength. The condition to achieve sustainable dislocation nucleation from a nanoprecipitate is governed by the lattice mismatch between the precipitate and matrix, with stress comparable to the recently reported high strength in metals with large amount of nanoscale precipitates. It is also shown that the combination of Orowan’s precipitate hardening model and our critical condition for dislocation nucleation at a nanoprecipitate immediately provides a criterion to select precipitate size and spacing in material design. The findings reported here thus may help establish a foundation for strength–ductility optimization through densely dispersed nanoprecipitates in multiple-element alloy systems.
more »
« less
A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites
Abstract Nanograined metals have the merit of high strength, but usually suffer from low work hardening capacity and poor thermal stability, causing premature failure and limiting their practical utilities. Here we report a “nanodispersion-in-nanograins” strategy to simultaneously strengthen and stabilize nanocrystalline metals such as copper and nickel. Our strategy relies on a uniform dispersion of extremely fine sized carbon nanoparticles (2.6 ± 1.2 nm) inside nanograins. The intragranular dispersion of nanoparticles not only elevates the strength of already-strong nanograins by 35%, but also activates multiple hardening mechanisms via dislocation-nanoparticle interactions, leading to improved work hardening and large tensile ductility. In addition, these finely dispersed nanoparticles result in substantially enhanced thermal stability and electrical conductivity in metal nanocomposites. Our results demonstrate the concurrent improvement of several mutually exclusive properties in metals including strength-ductility, strength-thermal stability, and strength-electrical conductivity, and thus represent a promising route to engineering high-performance nanostructured materials.
more »
« less
- PAR ID:
- 10372036
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Additive friction stir deposition (AFSD) is a novel additive manufacturing technique that enables the fabrication of components in the solid state. Given the benefits of AFSD, understanding the behavior of various feedstock materials after undergoing the AFSD process is crucial for optimizing their performance in structural applications. This study aims to evaluate the effects of AFSD on an Al–Mg alloy, Al5086, comparing it to its initial H32 condition to assess the changes in mechanical properties, microstructure, corrosion resistance, microhardness, and electrical conductivity. Tensile testing showed a 23% reduction in yield strength for as-deposited samples, while ultimate tensile strength remained comparable to the feedstock. Ductility improved significantly, with elongation to failure increasing by 77%, attributed to grain refinement and dynamic recovery. Microhardness decreased by 16% in lower layers due to thermal exposure, but electrical conductivity remained stable, indicating minimal solute atom redistribution. The Nitric Acid Mass Loss Test (NAMLT) revealed a 245% increase in corrosion rate for the AFSD material, linked to the higher density of grain boundaries acting as pathways for corrosion. These findings highlight AFSD’s potential for improving ductility and formability. However, they underscore the need for optimization to reduce corrosion susceptibility and address mechanical strength trade-offs. Future work should focus on fine-tuning process parameters or implementing post-treatment methods to enhance corrosion and mechanical performance.more » « less
-
Abstract Multi‐elemental alloy (MEA) nanoparticles have recently received notable attention owing to their high activity and superior phase stability. Previous syntheses of MEA nanoparticles mainly used carbon as the support, owing to its high surface area, good electrical conductivity, and tunable defective sites. However, the interfacial stability issue, such as nanoparticle agglomeration, remains outstanding due to poor interfacial binding between MEA and carbon. Such a problem often causes performance decay when MEA nanoparticles are used as catalysts, hindering their practical applications. Herein, an interface engineering strategy is developed to synthesize MEA–oxide–carbon hierarchical catalysts, where the oxide on carbon helps disperse and stabilize the MEA nanoparticles toward superior thermal and electrochemical stability. Using several MEA compositions (PdRuRh, PtPdIrRuRh, and PdRuRhFeCoNi) and oxides (TiO2and Cr2O3) as model systems, it is shown that adding the oxide renders superior interfacial stability and therefore excellent catalytic performance. Excellent thermal stability is demonstrated under transmission electron microscopy with in situ heating up to 1023 K, as well as via long‐term cycling (>370 hours) of a Li–O2battery as a harsh electrochemical condition to challenge the catalyst stability. This work offers a new route toward constructing efficient and stable catalysts for various applications.more » « less
-
Quenching and partitioning (Q&P) processing of third-generation advanced high strength steels generates multiphase microstructures containing metastable retained austenite. Deformation-induced martensitic transformation of retained austenite improves strength and ductility by increasing instantaneous strain hardening rates. This paper explores the influence of martensitic transformation and strain hardening on tensile performance. Tensile tests were performed on steels with nominally similar compositions and microstructures (11.3 to 12.6 vol. pct retained austenite and 16.7 to 23.4 vol. pct ferrite) at 980 and 1180 MPa ultimate tensile strength levels. For each steel, tensile performance was generally consistent along different orientations in the sheet relative to the rolling direction, but a greater amount of austenite transformation occurred during uniform elongation along the rolling direction. Neither the amount of retained austenite prior to straining nor the total amount of retained austenite transformed during straining could be directly correlated to tensile performance. It is proposed that stability of retained austenite, rather than austenite volume fraction, greatly influences strain hardening rate, and thus controls strength and ductility. If true, this suggests that tailoring austenite stability is critical for optimizing the forming response and crash performance of quenched and partitioned grades.more » « less
-
Abstract Heat dissipation is a severe barrier for ever‐smaller and more functionalized electronics, necessitating the continuous development of accessible, cost‐effective, and highly efficient cooling solutions. Metals, such as silver and copper, with high thermal conductivity, can efficiently remove heat. However, ultralow infrared thermal emittance (<0.03) severely restricts their radiative heat dissipation capability. Here, a solution‐processed chemical oxidation reaction is demonstrated for transfiguring “infrared‐white” metals (high infrared thermal reflectance) to “infrared‐black” metametals (high infrared thermal emittance). Enabled by strong molecular vibrations of metal‐oxygen chemical bonds, this strategy via assembling nanostructured metal oxide thin films on metal surface yields infrared spectrum manipulation, high and omnidirectional thermal emittance (0.94 from 0 to 60°) with excellent thermomechanical stability. The thin film of metal oxides with relatively high thermal conductivity does not hinder heat dissipation. “Infrared‐black” meta‐aluminum shows a temperature drop of 21.3 °C corresponding to a cooling efficiency of 17.2% enhancement than the pristine aluminum alloy under a heating power of 2418 W m−2. This surface photon‐engineered strategy is compatible with other metals, such as copper and steel, and it broadens its implementation for accelerating heat dissipation.more » « less
