An official website of the United States government
Reported herein is a new reaction for glycosylation with thioglycosides in the presence of iron(III) chloride. Previously, FeCl3 was used for the activation of thioglycosides as a Lewis acid co-promoter paired with NIS. In the reported process, although 5.0 equiv of FeCl3 are needed to activate thioglycosides most efficiently, no additives were used, and the reactions with reactive glycosyl donors smoothly proceeded to completion in 1 h at 0 °C. This work showcases a new direction in developing glycosylation methods using greener and earth-abundant activators.
more »
« less
Transition‐Metal‐Mediated Glycosylation with Thioglycosides
Abstract Thioglycosides are among the most common glycosyl donors that find broad application in the synthesis of glycans and glycoconjugates. However, the requirement for toxic and/or large access of activators needed for common glycosylations with thioglycosides remains a notable drawback. Due to the increased awareness of the chemical waste impact on the environment, synthetic studies have been driven by the goal of finding non‐toxic reagents. The main focus of this review is to highlight recent methods for thioglycoside activation that rely on transition metal catalysis.
more »
« less
- PAR ID:
- 10372169
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Chemistry – A European Journal
- Volume:
- 28
- Issue:
- 14
- ISSN:
- 0947-6539
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The lyotropic properties of alkyl thioglycosides with varying sugar headgroup (lactose, cellobiose, maltose, galactose, or glucose) and alkyl chain length (octyl, decyl, or dodecyl chains) are investigated by surface tensiometry, visual observation, and fluorescence spectroscopy. The results substantiate that the glycosidic S‐linkage confers considerably different solution aggregation behavior on these surfactants relative to their O‐linked counterparts, where the properties of the latter are known. The materials properties of the aggregated structures from the alkyl thioglycosides vary considerably. Micelles are formed by octyl thiocellobioside and all alkyl thiomaltosides. Turbid aggregate solutions are formed by the alkyl thioglucosides and octyl thiogalactoside, whereas the longer chain alkyl thiogalactosides are minimally soluble. Fluorescence spectroscopy of these systems confirms their aggregation in lamellar‐like structures. The alkyl thiocellobiosides and alkyl thiolactosides form hydrogels from these low‐molecular weight materials at concentrations almost an order of magnitude lower than gels using other low‐molecular weight materials. Here, hydrogels form at concentrations <0.3 wt% with some forming hydrogels at concentrations as low as 0.03 wt% from alkyl thiocellobiosides and thiolactosides, with hydrogel properties differing significantly with this slight change in the sugar headgroup. Alkyl thiocellobiosides form a nanofiber network and alkyl thiolactosides form globular hydrogels. Overall, these results clearly document materials properties that can readily be controlled and designed depending on molecular structure.more » « less
-
Abstract While studying indolylthio glycosides, previously we determined their activation profile that required large excess of activators. This drawback was partially addressed in the present study of N‐alkylated SInR derivatives. The activation process was studied by NMR and the increased understanding of the mechanism led to a discovery of different activation pathways taking place with SIn versus SInR derivatives. Also investigated was orthogonality of the SInR leaving groups versus thioglycosides and selective activation of thioimidates over SInR glycosides.more » « less
-
Abstract Despite having favorable optoelectronic and thermomechanical properties, the wide application of semiconducting polymers still suffers from limitations, particularly with regards to their processing in solution which necessitates toxic chlorinated solvents due to their intrinsic low solubility in common organic solvents. This work presents a novel greener approach to the fabrication of organic electronics without the use of toxic chlorinated solvents. Low‐molecular‐weight non‐toxic branched polyethylene (BPE) is used as a solvent to process diketopyrrolopyrrole‐based semiconducting polymers, then the solvent‐induced phase separation (SIPS) technique is adopted to produce films of semiconducting polymers from solution for the fabrication of organic field‐effect transistors (OFETs). The films of semiconducting polymers prepared from BPE using SIPS show a more porous granular morphology with preferential edge‐on crystalline orientation compared to the semiconducting polymer film processed from chloroform. OFETs based on the semiconducting films processed from BPE show similar device characteristics to those prepared from chloroform without thermal annealing, confirming the efficiency and suitability of BPE to replace traditional chlorinated solvents for green organic electronics. This new greener processing approach for semiconducting polymers is potentially compatible with different printing techniques and is particularly promising for the preparation of porous semiconducting layers and the fabrication of OFET‐based electronics.more » « less
-
null (Ed.)Described herein is the first example of glycosidation of thioglycosides in the presence of palladium( ii ) bromide. While the activation with PdBr 2 alone was proven feasible, higher yields and cleaner reactions were achieved when these glycosylations were performed in the presence of propargyl bromide as an additive. Preliminary mechanistic studies suggest that propargyl bromide assists the reaction by creating an ionizing complex, which accelerates the leaving group departure. A variety of thioglycoside donors in reactions with different glycosyl acceptors were investigated to determine the initial scope of this new reaction. Selective and chemoselective activation of thioglycosides over other leaving groups has also been explored.more » « less
