An official website of the United States government
Abstract Horizontal distribution of the vertically integrated barotropic‐to‐baroclinic energy conversion has been widely studied to examine the generation of internal tides at steep topography. The vertical structure of the energy conversion that provides insights into the associated dynamics, however, is masked by the often used depth‐integrated approach. Here, we reveal the vertical profile of barotropic‐to‐baroclinic energy conversion by employing an idealized ocean model in a slope‐shelf context forced byM2barotropic tidal flow. The model shows two vertically separated hotspots of energy conversion, one near the sloping bottom and the other at the thermocline, resulting from the stronger vertical velocity and enhancement of the density perturbation, respectively. Isolation of the hotspots demonstrates that baroclinic energy generated in the bottom layer radiates toward onshore and offshore primarily in the form of internal wave beams, whereas that generated at the thermocline propagates away in the form of internal wave modes. Although energy converted at the thermocline contributes to only a small portion of the total energy conversion, it plays an important role in onshore baroclinic energy radiation and can be significantly affected by the internal wave activity at the bottom layer. With a fixed bottom topography, the percentage of baroclinic energy generated at the thermocline is linearly related to a body force exerted by the barotropic tidal flow over topography that can be estimated analytically. This provides a convenient way to estimate the overall barotropic‐to‐baroclinic energy conversion over a continental slope in the real ocean by measuring the energy conversion in the thermocline only.
more »
« less
The Importance of Remote Forcing for Regional Modeling of Internal Waves
Abstract Regional ocean general circulation models are generally forced at the boundaries by mesoscale ocean dynamics and barotropic tides. In this work we provide evidence that remotely forced internal waves can be a significant source of energy for the dynamics. We compare global and regional model solutions within the California Current System. Both models have similar inputs, forcings, and identical grids and numerics. The global model has a steric height power spectrum consistent with mooring observations at superinertial frequencies, while the regional model spectrum is weaker. The regional model also has less sea surface height variance at high wavenumber than the global model. The vertical velocity variance is significantly larger in the global model, except in the sheltered Southern California Bight. While the regional model has roughly equal high‐pass baroclinic and barotropic kinetic energy levels, the global model high‐pass baroclinic kinetic energy is 28% (0.39 PJ) greater than the barotropic energy. An internal wave energy flux analysis reveals that the regional model domain boundaries act as a sink of 183 MW, while in the global model the analysis domain boundaries act as a source of 539 MW. This 722 MW difference can account for the relative increase of 0.39 PJ high‐pass baroclinic energy in the global model, assuming a baroclinic kinetic energy dissipation time in the domain of approximately 6.3 days. The results here imply that most regional ocean models will need to account for internal wave boundary fluxes in order to reproduce the observed internal wave continuum spectrum.
more »
« less
- PAR ID:
- 10375481
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Oceans
- Volume:
- 125
- Issue:
- 2
- ISSN:
- 2169-9275
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In this study, we investigate the transition of semidiurnal Kelvin waves into Hybrid Kelvin-Edge (HKE) waves and associated generation of internal tides at widening shelves using theory, a realistic global baroclinic ocean model simulation, and quasi-realistic regional barotropic model simulations. Using the global model simulation, we identify several areas where a tidal HKE wave transition co-exists with internal wave generation. Of all areas considered, the Celtic Sea/Bay of Biscay shelf has the widest shelf and the strongest internal tide generation. We find that the global simulation agrees better with the theoretical Kelvin modes on the narrow than with the hybrid edge modes on the wide shelves. To help us understand the effect of complex, realistic bathymetry on the HKE wave transition, we perform quasi-realistic 1/25◦ barotropic simulations of the Celtic Sea/Bay of Biscay shelf areas. In these simulations, we gradually change the realistic bathymetry to a more idealized bathymetry. The idealized simulations show that the complex bathymetry steers the barotropic energy flux and causes standing wave patterns, which mask the HKE wave transition. Based on this analysis, we conclude that the HKE wave transition in the Celtic Sea/Bay of Biscay and other shelf areas in the global ocean is most likely masked by the effects of complex bathymetry and that offshelf baroclinic fluxes cannot be exclusively attributed to the HKE wave transition.more » « less
-
Abstract The decay of the low‐mode internal tide due to the superharmonic energy cascade is investigated in a realistically forced global Hybrid Coordinate Ocean Model simulation with 1/25° (4 km) horizontal grid spacing. Time‐mean and depth‐integrated supertidal kinetic energy is found to be largest near low‐latitude internal tide generation sites, such as the Bay of Bengal, Amazon Shelf, and Mascarene Ridge. The supertidal kinetic energy can make up to 50% of the total internal tide kinetic energy several hundred kilometers from the generation sites. As opposed to the tidal flux divergence, the supertidal flux divergence does not correlate with the barotropic to baroclinic energy conversion. Instead, the time‐mean and depth‐integrated supertidal flux divergence correlates with the nonlinear kinetic energy transfers from (sub)tidal to supertidal frequency bands as estimated with a novel coarse‐graining approach. The regular spaced banding patterns of the surface‐intensified nonlinear energy transfers are attributed to semidiurnal mode 1 and mode 2 internal waves that interfere constructively at the surface. This causes patches where both surface tidal kinetic energy and nonlinear energy transfers are elevated. The simulated internal tide off the Amazon Shelf steepens significantly near these patches, generating solitary‐like waves in good agreement with Synthetic Aperture Radar imagery. Globally, we find that regions of high supertidal energy flux also show a high correlation with observed instances of internal solitary waves.more » « less
-
Abstract The submesoscale energy budget is complex and remains understood only in region-by-region analyses. Based on a series of nested numerical simulations, this study investigated the submesoscale energy budget and flux in the upper ocean of the Kuroshio Extension, including some innovations for examining submesoscale energy budgets in general. The highest-resolution simulation on a ~500 m grid resolves a variety of submesoscale instabilities allowing an energetic analysis in the submesoscale range. The frequency–wavenumber spectra of vertical vorticity variance (i.e., enstrophy) and horizontal divergence variance were used to identify the scales of submesoscale flows as distinct from those of inertia-gravity waves but dominating horizontal divergence variance. Next, the energy transfers between the background scales and the submesoscale were examined. The submesoscale kinetic and potential energy (SMKE and SMPE) were mainly contained in the mixed layer and energized through both barotropic (shear production) and baroclinic (buoyancy production) routes. Averaged over the upper 50 m of ROMS2, the baroclinic transfers amounted to approximately 75% of the sources for the SMKE (3.42 × 10 −9 W/kg) versus the remaining 25% (1.12 × 10 −9 W/kg) via barotropic downscale KE transfers. The KE field was greatly strengthened by energy sources through the boundary—this flux is larger than the mesoscale-to-submesoscale transfers in this region. Spectral energy production, importantly, reveals upscale KE transfers at larger submesoscales and downscale KE transfers at smaller submesoscales (i.e., a transition from inverse to forward KE cascade). This study seeks to extend our understanding of the energy cycle to the submesoscale and highlight the forward KE cascade induced by upper-ocean submesoscale activities in the research domain.more » « less
-
Abstract This study showcases a global, heterogeneously coupled total water level system wherein salinity and temperature outputs from a coarser‐resolution (12 km) ocean general circulation model are used to calculate density‐driven terms within a global, higher‐resolution (2.5 km) depth‐averaged total water level model. We demonstrate that the inclusion of baroclinic forcing in the barotropic model requires modification of the internal wave drag term to prevent excess degradation of tidal results compared to the barotropic model. By scaling the internal tide dissipation by an easy to calculate dissipation ratio, the resulting heterogeneously coupled model has complex root mean square errors (RMSE) of 2.27 cm in the deep ocean and 12.16 cm in shallow waters for the tidal constituent. While this represents a 10%–20% deterioration as compared to the barotropic model, the improvements in total water level prediction more than offset this degradation. Global median RMSE compared to observations of total water levels, 30‐day sea levels, and non‐tidal residuals improve by 1.86 (18.5%), 2.55 (42.5%), and 0.36 (5.3%) cm respectively. The drastic improvement in model performance highlights the importance of including density‐driven effects within global hydrodynamic models and will help to improve the results of both hindcasts and forecasts in modeling extreme and nuisance flooding. With only an 11% increase in model run time compared to the fully barotropic total water level model, this approach paves the way for high resolution coastal water level and flood models to be used alongside climate models, improving operational forecasting of total water levels.more » « less
