skip to main content


Title: Using Structure Location Data to Map the Wildland–Urban Interface in Montana, USA
The increasing wildfire activity and rapid population growth in the wildland–urban interface (WUI) have made more Americans exposed to wildfire risk. WUI mapping plays a significant role in wildfire management. This study used the Microsoft building footprint (MBF) and the Montana address/structure framework datasets to map the WUI in Montana. A systematic comparison of the following three types of WUI was performed: the WUI maps derived from the Montana address/structure framework dataset (WUI-P), the WUI maps derived from the MBF dataset (WUI-S), and the Radeloff WUI map derived from census data (WUI-Z). The results show that WUI-S and WUI-P are greater than WUI-Z in the WUI area. Moreover, WUI-S has more WUI area than WUI-P due to the inclusion of all structures rather than just address points. Spatial analysis revealed clusters of high percentage WUI area in western Montana and low percentage WUI area in eastern Montana, which is likely related to a combination of factors including topography and population density. A web GIS application was also developed to facilitate the dissemination of the resulting WUI maps and allow visual comparison between the three WUI types. This study demonstrated that the MBF can be a useful resource for mapping the WUI and could be used in place of a national address point dataset.  more » « less
Award ID(s):
2138647
NSF-PAR ID:
10376286
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Fire
Volume:
5
Issue:
5
ISSN:
2571-6255
Page Range / eLocation ID:
129
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Due to the mixed distribution of buildings and vegetation, wildland-urban interface (WUI) areas are characterized by complex fuel distributions and geographical environments. The behavior of wildfires occurring in the WUI often leads to severe hazards and significant damage to man-made structures. Therefore, WUI areas warrant more attention during the wildfire season. Due to the ever-changing dynamic nature of California’s population and housing, the update frequency and resolution of WUI maps that are currently used can no longer meet the needs and challenges of wildfire management and resource allocation for suppression and mitigation efforts. Recent developments in remote sensing technology and data analysis algorithms pose new opportunities for improving WUI mapping methods. WUI areas in California were directly mapped using building footprints extracted from remote sensing data by Microsoft along with the fuel vegetation cover from the LANDFIRE dataset in this study. To accommodate the new type of datasets, we developed a threshold criteria for mapping WUI based on statistical analysis, as opposed to using more ad-hoc criteria as used in previous mapping approaches. This method removes the reliance on census data in WUI mapping, and does not require the calculation of housing density. Moreover, this approach designates the adjacent areas of each building with large and dense parcels of vegetation as WUI, which can not only refine the scope and resolution of the WUI areas to individual buildings, but also avoids zoning issues and uncertainties in housing density calculation. Besides, the new method has the capability of updating the WUI map in real-time according to the operational needs. Therefore, this method is suitable for local governments to map local WUI areas, as well as formulating detailed wildfire emergency plans, evacuation routes, and management measures. 
    more » « less
  2. Ensemble-based change detection can improve map accuracies by combining information from multiple datasets. There is a growing literature investigating ensemble inputs and applications for forest disturbance detection and mapping. However, few studies have evaluated ensemble methods other than Random Forest classifiers, which rely on uninterpretable “black box” algorithms with hundreds of parameters. Additionally, most ensemble-based disturbance maps do not utilize independently and systematically collected field-based forest inventory measurements. Here, we compared three approaches for combining change detection results generated from multi-spectral Landsat time series with forest inventory measurements to map forest harvest events at an annual time step. We found that seven-parameter degenerate decision tree ensembles performed at least as well as 500-tree Random Forest ensembles trained and tested on the same LandTrendr segmentation results and both supervised decision tree methods consistently outperformed the top-performing voting approach (majority). Comparisons with an existing national forest disturbance dataset indicated notable improvements in accuracy that demonstrate the value of developing locally calibrated, process-specific disturbance datasets like the harvest event maps developed in this study. Furthermore, by using multi-date forest inventory measurements, we are able to establish a lower bound of 30% basal area removal on detectable harvests, providing biophysical context for our harvest event maps. Our results suggest that simple interpretable decision trees applied to multi-spectral temporal segmentation outputs can be as effective as more complex machine learning approaches for characterizing forest harvest events ranging from partial clearing to clear cuts, with important implications for locally accurate mapping of forest harvests and other types of disturbances. 
    more » « less
  3. Abstract

    Past studies reported a drastic growth in the wildland–urban interface (WUI), the location where man‐made structures meet or overlap wildland vegetation. Fighting fire is difficult in the WUI due to the combination of wildland and structural fuels, and therefore, WUI areas are characterized by frequent damage and loss of structures from wildfires. Recent wildland fire policy has targeted fire prevention, evacuation planning, fuel treatment, and home hardening in WUI areas. Therefore, it is important to understand the occurrence of wildfire events relative to the location of the WUI. In this work, we have reported the occurrences of wildfires with respect to the WUI and quantified how much of the WUI is on complex topography in California, which intensifies fire behavior and complicates fire suppression. We have additionally analyzed the relative importance of WUI‐related parameters, such as housing density, vegetation density, and distance to wildfires, as well as topographic factors, such as slope, elevation, aspect, and surface roughness, on the occurrence of large and small wildfires and the burned area of large wildfires near the WUI. We found that a very small percentage of wildfire ignition points and large wildfire‐burned areas (>400 ha or 1000 acres) were located in the WUI areas. A small percentage of large wildfires were encountered in WUI (3%), and the WUI area accounted for only 4% of the area burned, which increased to 5% and 56%, respectively, outside WUI (5‐km buffer from WUI). Similarly, 66% of fires ignited outside WUI, whereas only 3.6% ignited within WUI. Results from this study have implications for fuel management and infrastructure hardening, as well as for fire suppression and community response.

     
    more » « less
  4. Abstract

    Wheat (Triticum aestivum) genetic maps are a key enabling tool for genetic studies. We used genotyping-by-sequencing-(GBS) derived markers to map recombinant inbred line (RIL) and doubled haploid (DH) populations from crosses of W7984 by Opata, and used the maps to explore features of recombination control. The RIL and DH populations, SynOpRIL and SynOpDH, were composed of 906 and 92 individuals, respectively. Two high-density genetic linkage framework maps were constructed of 2,842 and 2,961 cM, harboring 3,634 and 6,580 markers, respectively. Using imputation, we added 43,013 and 86,042 markers to the SynOpRIL and SynOpDH maps. We observed preferential recombination in telomeric regions and reduced recombination in pericentromeric regions. Recombination rates varied between subgenomes, with the D genomes of the two populations exhibiting the highest recombination rates of 0.26–0.27 cM/Mb. QTL mapping identified two additive and three epistatic loci associated with crossover number. Additionally, we used published POPSEQ data from SynOpDH to explore the structural variation in W7984 and Opata. We found that chromosome 5AS is missing from W7984. We also found 2,332 variations larger than 100 kb. Structural variants were more abundant in distal regions, and overlapped 9,196 genes. The two maps provide a resource for trait mapping and genomic-assisted breeding.

     
    more » « less
  5. Ice-rich permafrost in the circum-Arctic and sub-Arctic (hereafter pan-Arctic), such as late Pleistocene Yedoma, are especially prone to degradation due to climate change or human activity. When Yedoma deposits thaw, large amounts of frozen organic matter and biogeochemically relevant elements return into current biogeochemical cycles. This mobilization of elements has local and global implications: increased thaw in thermokarst or thermal erosion settings enhances greenhouse gas fluxes from permafrost regions. In addition, this ice-rich ground is of special concern for infrastructure stability as the terrain surface settles along with thawing. Finally, understanding the distribution of the Yedoma domain area provides a window into the Pleistocene past and allows reconstruction of Ice Age environmental conditions and past mammoth-steppe landscapes. Therefore, a detailed assessment of the current pan-Arctic Yedoma coverage is of importance to estimate its potential contribution to permafrost-climate feedbacks, assess infrastructure vulnerabilities, and understand past environmental and permafrost dynamics. Building on previous mapping efforts, the objective of this paper is to compile the first digital pan-Arctic Yedoma map and spatial database of Yedoma coverage. Therefore, we 1) synthesized, analyzed, and digitized geological and stratigraphical maps allowing identification of Yedoma occurrence at all available scales, and 2) compiled field data and expert knowledge for creating Yedoma map confidence classes. We used GIS-techniques to vectorize maps and harmonize site information based on expert knowledge. We included a range of attributes for Yedoma areas based on lithological and stratigraphic information from the source maps and assigned three different confidence levels of the presence of Yedoma (confirmed, likely, or uncertain). Using a spatial buffer of 20 km around mapped Yedoma occurrences, we derived an extent of the Yedoma domain. Our result is a vector-based map of the current pan-Arctic Yedoma domain that covers approximately 2,587,000 km 2 , whereas Yedoma deposits are found within 480,000 km 2 of this region. We estimate that 35% of the total Yedoma area today is located in the tundra zone, and 65% in the taiga zone. With this Yedoma mapping, we outlined the substantial spatial extent of late Pleistocene Yedoma deposits and created a unique pan-Arctic dataset including confidence estimates. 
    more » « less