An official website of the United States government
Abstract The Indo‐Burma subduction zone is a highly oblique subduction system where the Indian plate is converging with the Eurasian plate. How strain is partitioned between the Indo‐Burma interface and upper plate Kabaw Fault, and whether the megathrust is a locked and active zone of convergence that can generate great earthquakes are ongoing debates. Here, we use data from a total of 68 Global Navigation Satellite System (GNSS) stations, including newly installed stations across the Kabaw Fault and compute an updated horizontal and vertical GNSS velocity field. We correct vertical rates for fluctuating seasonal signals by accounting for the elastic response of monsoon water on the crust. We model the geodetic data by inverting for 11,000 planar and non‐planar megathrust fault geometries and two geologically viable structural interpretations of the Kabaw Fault that we construct from field geological data, considering a basin‐scale wedge‐fault and a crustal‐scale reverse fault. We demonstrate that the Indo‐Burma megathrust is locked, converging at a rate ofmm/yr, and capable of hosting >8.2Mwmegathrust events. We also show that the Kabaw Fault is locked and accommodating strike‐slip motion at a rate ofmm/yr and converging at a rate ofmm/yr. Our interpretation of the geological, geophysical, and geodetic datasets indicates the Kabaw Fault is a crustal‐scale structure that actively absorbs a portion of the convergence previously ascribed to the Indo‐Burma megathrust. This reveals a previously unrecognized seismic hazard associated with the Kabaw Fault and slightly reduces the estimated hazard posed by megathrust earthquakes in the region.
more »
« less
Revealing Crustal Deformation and Strain Rate in Taiwan Using InSAR and GNSS
Abstract Interseismic deformation describes the gradual accumulation of crustal strain within the tectonic plate and along the plate boundaries before the sudden release as earthquakes. In this study, we use 5 years of high spatial and temporal geodetic measurements, including Global Navigation Satellite System and Interferometric Synthetic Aperture Radar to monitor 3‐dimension interseismic crustal deformation and horizontal strain rate in Taiwan. We find significant deformation (strain rate >8 10−6 yr−1) along the plate boundary between the Philippine Sea and the Eurasian Plates in east Taiwan. The high strain rate in the southern part of the Western Foothills is distributed along a few major fault systems, which reveals the geometry of the deformation front in west Taiwan. Our results help identify active faults in southwest and north Taiwan that were not identified before. These findings can be insightful in informing future seismic hazard models.
more »
« less
- Award ID(s):
- 2026099
- PAR ID:
- 10378115
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 49
- Issue:
- 21
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We present a flow law for dislocation‐dominated creep in wet quartz derived from compiled experimental and field‐based rheological data. By integrating the field‐based data, including independently calculated strain rates, deformation temperatures, pressures, and differential stresses, we add constraints for dislocation‐dominated creep at conditions unattainable in quartz deformation experiments. A Markov Chain Monte Carlo (MCMC) statistical analysis computes internally consistent parameters for the generalized flow law: = Aσne−(Q+VP)/RT. From this initial analysis, we identify differenteffectivestress exponents for quartz deformed at confining pressures above and below ∼700 MPa. To minimize the possible effect of confining pressure, compiled data are separated into “low‐pressure” (<560 MPa) and “high‐pressure” (700–1,600 MPa) groups and reanalyzed using the MCMC approach. The “low‐pressure” data set, which is most applicable at midcrustal to lower‐crustal confining pressures, yields the following parameters: log(A) = −9.30 ± 0.66 MPa−n−r s−1;n = 3.5 ± 0.2;r = 0.49 ± 0.13;Q = 118 ± 5 kJ mol−1; andV = 2.59 ± 2.45 cm3 mol−1. The “high‐pressure” data set produces a different set of parameters: log(A) = −7.90 ± 0.34 MPa−n−r s−1;n = 2.0 ± 0.1;r = 0.49 ± 0.13;Q = 77 ± 8 kJ mol−1; andV = 2.59 ± 2.45 cm3 mol−1. Predicted quartz rheology is compared to other flow laws for dislocation creep; the calibrations presented in this study predict faster strain rates under geological conditions by more than 1 order of magnitude. The change innat high confining pressure may result from an increase in the activity of grain size sensitive creep.more » « less
-
Abstract The 2021MW6.0 Yangbi, Yunnan strike‐slip earthquake occurred on an unmapped crustal fault near the Weixi‐Qiaoho‐Weishan Fault along the southeast margin of the Tibetan Plateau. Using near‐source broadband seismic data from ChinArray, we investigate the spatial and temporal rupture evolution of the mainshock using apparent moment‐rate functions (AMRFs) determined by the empirical Green's function (EGF) method. Assuming a 1D line source on the fault plane, the rupture propagated unilaterally southeastward (∼144°) over a rupture length of ∼8.0 km with an estimated rupture speed of 2.1 km/s to 2.4 km/s. A 2D coseismic slip distribution for an assumed maximum rupture propagation speed of 2.2 km/s indicates that the rupture propagated to the southeast ∼8.0 km along strike and ∼5.0 km downdip with a peak slip of ∼2.1 m before stopping near the largest foreshock, where three bifurcating subfaults intersect. Using the AMRFs, the radiated energy of the mainshock is estimated as ∼. The relatively low moment scaled radiated energyof 1.5 × 10−5and intense foreshock and aftershock activity might indicate reactivation of an immature fault. The earthquake sequence is mainly distributed along a northwest‐southeast trend, and aftershocks and foreshocks are distributed near the periphery of the mainshock large‐slip area, suggesting that the stress in the mainshock slip zone is significantly reduced to below the level for more than a few overlapping aftershock to occur.more » « less
-
Abstract Imaging tectonic creep along active faults is critical for measuring strain accumulation and ultimately understanding the physical processes that guide creep and the potential for seismicity. We image tectonic deformation along the central creeping section of the San Andreas Fault at the Dry Lake Valley paleoseismic site (36.468°N, 121.055°W) using three data sets with varying spatial and temporal scales: (1) an Interferometric Synthetic Aperture Radar (InSAR) velocity field with an ~100‐km footprint produced from Sentinel‐1 satellite imagery, (2) light detection and ranging (lidar) and structure‐from‐motion 3‐D topographic differencing that resolves a decade of deformation over a 1‐km aperture, and (3) surface fractures that formed over the 3‐ to 4‐m wide fault zone during a drought from late 2012 to 2014. The InSAR velocity map shows that shallow deformation is localized to the San Andreas Fault. We demonstrate a novel approach for differencing airborne lidar and structure‐from‐motion topography that facilitates resolving deformation along and adjacent to the San Andreas Fault. The 40‐m resolution topographic differencing resolves a 2.5 ± 0.2 cm/yr slip rate localized to the fault. The opening‐mode fractures accommodate cm/yr of fault slip. A 90% ± 30% of the 1‐km aperture deformation is accommodated over the several meter‐wide surface trace of the San Andreas Fault. The extension direction inferred from the opening‐mode fractures and topographic differencing is 40°–48° from the local trend of the San Andreas Fault. The localization of deformation likely reflects the well‐oriented and mature fault.more » « less
-
Abstract Measuring crustal strain and seismic moment accumulation, is crucial for understanding the growth and distribution of seismic hazards along major fault systems. Here, we develop a methodology to integrate 4.5 years (2015–2019.5) of Sentinel‐1 Interferometric Synthetic Aperture Radar (InSAR) and continuous Global Navigation Satellite System (GNSS) time series to achieve 6 to 12‐day sampling of surface displacements at ∼500 m spatial resolution over the entire San Andreas fault system. Numerous interesting deformation signals are identified with this product (video link:https://www.youtube.com/watch?v=SxNLQKmHWpY). We decompose the line‐of‐sight InSAR displacements into three dimensions by combining the deformation azimuth from a GNSS‐derived interseismic fault model. We then construct strain rate maps using a smoothing interpolator with constraints from elasticity. The resulting deformation field reveals a wide array of crustal deformation processes including, on‐ and off‐fault secular and transient tectonic deformation, creep rates on all the major faults, and vertical signals associated with hydrological processes. The strain rate maps show significant off‐fault components that were not captured by GNSS‐only models. These results are important in assessing the seismic hazard in the region.more » « less
