skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Ambient Vibration Modal Analysis of Natural Rock Towers and Fins
Abstract The dynamic properties of freestanding rock towers are important inputs for seismic stability and vibration hazard assessments, however data describing the natural frequencies, mode shapes, and damping ratios of these landforms remain rare. We measured the ambient vibration of 14 sandstone and conglomerate rock towers and fins in Utah, United States, using broadband seismometers and nodal geophones. Fundamental frequencies vary between 0.8 and 15 Hz—inversely with tower height—and generally exhibit subhorizontal modal vectors oriented parallel to the minimum tower width. Modal damping ratios are low across all features, between 0.6% and 2.2%. We reproduced measured modal attributes in 3D numerical eigenfrequency models for 10 of the 14 landforms, showing that the fundamental mode of these features is full-height bending akin to a cantilever. Fin-like landforms commonly have a torsional second mode whereas tower-like features have a second full-height bending mode subperpendicular to the fundamental. In line with beam theory predictions, our data confirm that fundamental frequencies scale with the ratio of a tower’s width to its squared height. Compiled data from 18 other sites support our results, and taken together, provide guidance for estimating the modal properties of rock towers required for vibration risk assessment and paleoseismic shaking intensity analysis in different settings.  more » « less
Award ID(s):
1831283
PAR ID:
10378599
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Seismological Research Letters
Volume:
93
Issue:
3
ISSN:
0895-0695
Page Range / eLocation ID:
1777 to 1786
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Geophysical Research Letters)
    Abstract The dynamic properties of freestanding rock landforms are a function of fundamental material and mechanical parameters, facilitating noninvasive vibration‐based structural assessment. Characterization of resonant frequencies, mode shapes, and damping ratios, however, can be challenging at culturally sensitive geologic features, such as rock arches, where physical access is limited. Using sparse ambient vibration measurements, we describe three resonant modes between 1 and 40 Hz for 17 natural arches in Utah spanning a range of lengths from 3–88 m. Modal polarization data are evaluated to combine field observations with 3‐D numerical models. We find outcrop‐scale elastic moduli vary from 0.8 to 8.0 GPa, correlated with diagenetic processes and identify low damping at all sites. Correlation of dense‐array measurements from one arch validates predictions of simple bending modes and fixed boundary conditions. Our results establish use of sparse ambient resonance measurements for structural assessment and monitoring of arches and similar freestanding geologic features worldwide. 
    more » « less
  2. ; ; ; (, Bulletin of the Seismological Society of America)
    Abstract We acquired a unique ambient vibration dataset from Castleton Tower, a 120 m high bedrock monolith located near Moab, Utah, to resolve dynamic and material properties of the landform. We identified the first two resonant modes at 0.8 and 1.0 Hz, which consist of mutually perpendicular, linearly polarized horizontal ground motion at the top of the tower. Damping ratios for these modes were low at ∼1%. We successfully reproduced field data in 3D numerical eigenfrequency simulation implementing a Young’s modulus of 7 GPa, a value ∼30% lower than measured on core samples. Our analysis confirms that modal deformation at the first resonant frequencies closely resembles that of a cantilever beam. The outcome is that with basic estimates of geometry and material properties, the resonant frequencies of other freestanding rock monoliths can be estimated a priori. Such estimates are crucial to evaluate the response of rock towers to external vibration inputs. 
    more » « less
  3. ; ; ; ; ; (, The Seismic Record)
    Abstract Modal analysis of freestanding rock formations is crucial for evaluating their vibrational response to external stimuli, aiding accurate assessment of associated geohazards. Whereas conventional seismometers can be used to measure the translational components of normal modes, recent advances in rotational seismometer technology now allow direct measurement of the rotational components. We deployed a portable, three-component rotational seismometer for a short-duration experiment on a 36 m high sandstone tower located near Moab, Utah, in addition to conducting modal analysis using conventional seismic data and numerical modeling. Spectral analysis of rotation rate data resolved the first three natural frequencies of the tower (2.1, 3.1, and 5.9 Hz), and polarization analysis revealed the orientations of the rotation axes. Modal rotations were the strongest for the first two eigenmodes, which are mutually perpendicular, full-height bending modes with horizontal axes of rotation. The third mode is torsional with rotation about a subvertical axis. Measured natural frequencies and the orientations of displacements and rotation axes match our numerical models closely for these first three modes. In situ measurements of modal rotations are valuable at remote field sites with limited access, and contribute to an improved understanding of modal deformation, material properties, and landform response to vibration stimuli. 
    more » « less
  4. (, American Journal of Botany)
    Abstract PremiseThe structural and dynamic properties of columnar cacti are key inputs for stability analyses; however, no previous studies have been able to resolve these properties from full‐scale tests in situ. MethodsI present an approach using non‐destructive ambient vibration data to measure the resonance properties (modal frequencies and mode shapes) of single‐stem saguaro cacti and resolve key biomechanical properties. I tested the approach on 11 spears in the Tucson, Arizona region, United States. ResultsSaguaro fundamental frequencies ranged between 0.55 and 3.7 Hz with damping ratios of 1.5–2.1%. Additional higher‐order modes were identified below 10 Hz. Fundamental frequencies scaled linearly with the ratio of stem diameter to height‐squared, but deviated from analytical theory due to an observed increase in Young's modulus for taller plants. Calculated ratios between second‐ and first‐order bending frequencies also deviated from beam theory, indicating that stiffness decreases vertically for a given stem, especially for taller spears. These deviations both likely arise from the morphology of internal wooden ribs, which provide the main flexural rigidity. Numerical modeling at one site confirmed the cantilever approximation and height‐dependent stiffness, revealing an empirically derived Young's modulus that decreased exponentially from 107 Pa at the top of the stem to 108 Pa at its base. Twelve days of monitoring at another site showed that frequencies drift with diurnal cycles, suggesting softening of the outer tissue as temperatures warm during the day. ConclusionsThis non‐destructive approach for structural assessment provides valuable data for biomechanical characterization and stability and ecological analyses. 
    more » « less
  5. ; ; ; ; (, Earth Surface Dynamics)
    Abstract. Progressive fracturing contributes to structural degradation of natural rock arches and other freestanding rock landforms. However, methods to detect structural changes arising from fracturing are limited, particularly at sites with difficult access and high cultural value, where non-invasive approaches are essential. This study aims to determine how fractures affect the dynamic properties of rock arches, focusing on resonance modes as indicators of structural health conditions. We hypothesize that damage resulting from fracture propagation may influence specific resonance modes that can be identified through ambient vibration modal analysis. We characterized the dynamic properties (i.e., resonance frequencies, damping ratios, and mode shapes) of Hunter Canyon Arch, Utah (USA), using spectral and cross-correlation analyses of data generated from an array of nodal geophones. Results revealed properties of nine resonance modes with frequencies between 1 and 12 Hz. Experimental data were then compared to numerical models with homogeneous and heterogeneous compositions, the latter implementing weak mechanical zones in areas of mapped fractures. All numerical solutions replicated the first two resonance modes of the arch, indicating these modes are insensitive to structural complexity derived from fractures. Meanwhile, heterogenous models with discrete fracture zones succeeded in matching the frequency and shape of one additional higher mode, indicating this mode is sensitive to the presence of fractures and thus most likely to respond to structural change from fracture propagation. An evolutionary crack damage model was then applied to simulate fracture propagation, confirming that only this higher mode is sensitive to structural damage resulting from fracture growth. While examination of fundamental modes is common practice in structural health monitoring studies, our results suggest that analysis of higher-order resonance modes can be more informative for characterizing fracture-driven structural damage. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email