An official website of the United States government
Abstract The Transantarctic Mountains (TAMs), Antarctica, exhibit anomalous uplift and volcanism and have been associated with regions of thermally perturbed upper mantle that may or may not be connected to lower mantle processes. To determine if the anomalous upper mantle beneath the TAMs connects to the lower mantle, we interrogate the mantle transition zone (MTZ) structure under the TAMs and adjacent parts of East Antarctica using 12,500+ detections of P-to-S conversions from the 410 and 660 km discontinuities. Our results show distinct zones of thinner-than-global-average MTZ (∼205–225 km, ∼10%–18% thinner) beneath the central TAMs and southern Victoria Land, revealing throughgoing convective thermal anomalies (i.e., mantle plumes) that connect prominent upper and lower mantle low-velocity regions. This suggests that the thermally perturbed upper mantle beneath the TAMs and Ross Island may have a lower mantle origin, which could influence patterns of volcanism and TAMs uplift.
more »
« less
Topography of the 410 and 660 km Discontinuities Beneath the Cenozoic Okavango Rift Zone and Adjacent Precambrian Provinces
Abstract By taking advantage of the recent availability of a broadband seismic data set from Networks NR and BX covering the entire country of Botswana, we conduct a systematic receiver function investigation of the topography of the 410 and 660 km discontinuities beneath the incipient Okavango rift zone (ORZ) in northern Botswana and its adjacent Archean‐Proterozoic tectonic provinces in southern Africa. Similar to a previous mantle transition zone (MTZ) discontinuity study using data from a 1‐D profile traversing the ORZ, a normal MTZ thickness is observed in most parts of the study area. This is inconsistent with the existence of widespread positive thermal anomalies in the MTZ and further implies that active thermal upwelling from the lower mantle plays an insignificant role in the initiation of continental rifting. The results also suggest that cold temperature presumably associated with thick cratonic keels has indiscernible influence on the thermal structure of the MTZ. The expanded data set reveals several isolated areas of slight (~10 km or smaller) MTZ thinning. The largest of such areas has a NE‐SW elongated shape and is mostly caused by relative deepening of the 410 km discontinuity rather than shallowing of the 660 km discontinuity. These characteristics are different from those expected for a typical mantle plume. We speculate that the thinner‐than‐normal MTZ may be induced by minor thermal upwelling associated with late Mesozoic‐early Cenozoic lithospheric delamination, a recently proposed mechanism that might be responsible for the high elevation of southern Africa.
more »
« less
- Award ID(s):
- 1919789
- PAR ID:
- 10379787
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 125
- Issue:
- 9
- ISSN:
- 2169-9313
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Summary To provide constraints on a number of significant controversial issues related to the structure and dynamics of the Australian continent, we utilize P-to-S receiver functions (RFs) recorded by 182 stations to map the 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mantle transition zone (MTZ). The RFs are stacked in successive circular bins with a radius of 1o under a non-plane wavefront assumption. The d410 and d660 depths obtained using the 1-D IASP91 Earth model show a systematic apparent uplifting of about 15 km for both discontinuities in central and western Australia relative to eastern Australia, as the result of higher seismic wavespeeds in the upper mantle beneath the former area. After correcting the apparent depths using the Australian Seismological Reference Model, the d410 depths beneath the West Australia Craton are depressed by ∼10 km on average relative to the normal depth of 410 km, indicating a positive thermal anomaly of 100 K at the top of the MTZ which could represent a transition from a thinner than normal MTZ beneath the Indian ocean and the normal MTZ beneath central Australia. The abnormally thick MTZ beneath eastern Australia can be adequately explained by subducted cold slabs in the MTZ. A localized normal thickness of the MTZ beneath the Newer Volcanics Province provides supporting evidence of non-mantle-plume mechanism for intraplate volcanic activities in the Australian continent.more » « less
-
SUMMARY The Earth's mantle transition zone (MTZ) plays a key role in the thermal and compositional interactions between the upper and lower mantle. Seismic anisotropy provides useful information about mantle deformation and dynamics across the MTZ. However, seismic anisotropy in the MTZ is difficult to constrain from surface wave or shear wave splitting measurements. Here, we investigate the sensitivity to anisotropy of a body wave method, SS precursors, through 3-D synthetic modelling and apply it to real data. Our study shows that the SS precursors can distinguish the anisotropy originating from three depths: shallow upper mantle (80–220 km), deep upper mantle above 410 km, and MTZ (410–660 km). Synthetic resolution tests indicate that SS precursors can resolve $$\ge $$3 per cent azimuthal anisotropy where data have an average signal-to-noise ratio (SNR = 7) and sufficient azimuthal coverage. To investigate regional sensitivity, we apply the stacking and inversion methods to two densely sampled areas: the Japan subduction zone and a central Pacific region around the Hawaiian hotspot. We find evidence for significant VS anisotropy (15.3 ± 9.2 per cent) with a trench-perpendicular fast direction (93° ± 5°) in the MTZ near the Japan subduction zone. We attribute the azimuthal anisotropy to the grain-scale shape-preferred orientation of basaltic materials induced by the shear deformation within the subducting slab beneath NE China. In the central Pacific study region, there is a non-detection of MTZ anisotropy, although modelling suggests the data coverage should allow us to resolve at least 3 per cent anisotropy. Therefore, the Hawaiian mantle plume has not produced detectable azimuthal anisotropy in the MTZ.more » « less
-
SUMMARY The detailed structure near the 410-km discontinuity provides key constraints of the dynamic interactions between the upper mantle and the lower mantle through the mantle transition zone (MTZ) via mass and heat exchange. Meanwhile, the temperature of the subducting slab, which can be derived from its fast wave speed perturbation, is critical for understanding the mantle dynamics in subduction zones where the slab enters the MTZ. Multipathing, i.e. triplicated, body waves that bottom near the MTZ carry rich information of the 410-km discontinuity structure and can be used to constrain the discontinuity depth and radial variations of wave speeds across it. In this study, we systematically analysed the trade-off between model parameters in triplication studies using synthetic examples. Specifically, we illustrated the necessity of using array-normalized amplitude. Two 1-D depth profiles of the wave speed below the Tatar Strait of Russia in the Kuril subduction zone are obtained. We have observed triplications due to both the 410-km discontinuity and the slab upper surface. And, seismic structures for these two interfaces are simultaneously inverted. Our derived 410-km discontinuity depths for the northern and southern regions are at 420$$\pm $$15 and 425$$\pm $$15 km, respectively, with no observable uplift. The slab upper surface is inverted to be located about 50–70 km below the 410-km discontinuity. This location is between the depths of the 1 and 2 per cent P-wave speed perturbation contours of a regional 3-D full-waveform inversion (FWI) model, but we found twice the wave speed perturbation amplitude. A wave speed increase of 3.9–4.6 per cent within the slab, compared to 2.0–2.4 per cent from the 3-D FWI model, is necessary to fit the waveforms with the shortest period of 2 s, indicating that high-frequency waves are required to accurately resolve the detailed structures near the MTZ.more » « less
-
SUMMARY Despite progress in tomographic imaging of Earth's interior, a number of critical questions regarding the large-scale structure and dynamics of the mantle remain outstanding. One of those questions is the impact of phase-boundary undulations on global imaging of mantle heterogeneity and on geodynamic (i.e. convection-related) observables. To address this issue, we developed a joint seismic-geodynamic-mineral physical tomographic inversion procedure that incorporates lateral variations in the depths of the 410- and 660-km discontinuities. This inversion includes S-wave traveltimes, SS precursors that are sensitive to transition-zone topography, geodynamic observables/data (free-air gravity, dynamic surface topography, horizontal divergence of tectonic plates and excess core-mantle boundary ellipticity) and mineral physical constraints on thermal heterogeneity. Compared to joint tomography models that do not include data sensitivity to phase-boundary undulations in the transition zone, the inclusion of 410- and 660-km topography strongly influences the inference of volumetric anomalies in a depth interval that encompasses the transition zone and mid-mantle. It is notable that joint tomography inversions, which include constraints on transition-zone discontinuity topography by seismic and geodynamic data, yield more pronounced density anomalies associated with subduction zones and hotspots. We also find that the inclusion of 410- and 660-km topography may improve the fit to the geodynamic observables, depending on the weights applied to seismic and geodynamic data in the inversions. As a consequence, we find that the amplitude of non-thermal density anomalies required to explain the geodynamic data decreases in most of the mantle. These findings underline the sensitivity of the joint inversions to the inclusion of transition-zone complexity (e.g. phase-boundary topography) and the implications for the inferred non-thermal density anomalies in these depth regions. Finally, we underline that our inferences of 410- and 660-km topography avoid a commonly employed approximation that represents the contribution of volumetric heterogeneity to SS-wave precursor data. Our results suggest that this previously employed correction, based on a priori estimates of upper-mantle heterogeneity, might be a significant source of error in estimating the 410- and 660-km topography.more » « less
