An official website of the United States government
Cyclic voltammetry and controlled-potential (bulk) electrolysis have been employed to investigate the direct electrochemical reduction of acetochlor (1) at carbon and silver cathodes in dimethylformamide. Voltammograms of1exhibit a single irreversible cathodic peak at both cathode materials. Catalytic properties of silver towards carbon–halogen bond cleavage are evidenced by a positive shift in the reduction of acetochlor as compared to the more inert glassy carbon electrode. Voltammograms in the presence of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), and comparisons of calculated relative interaction energies between acetochlor, possible intermediates, and deschloroacetochlor in the presence of different proton donors, suggest strong hydrogen-bonding interactions between HFIP and a carbanion intermediate. Addition of HFIP to electrolysis conditions promotes complete reduction at both cathode materials, with formation of deschloroacetochlor in high yields. In deuterium labelling studies, the use of DMF-d7led to no evidence for deuterium atom incorporation. However, when HFIP-OD or D2O were employed as a proton source, substantial amounts of deuterated deschloroacetochlor were observed. A mechanism for the reduction of acetochlor is proposed, in which radical intermediates do not play a significant role in reduction, rather a carbanion intermediate pathway is followed.
more »
« less
Mechanistic Studies of the Electrocatalytic Carbon–Bromine Cleavage and the Hydrogen Atom Incorporation from 1,1,1,3,3,3-Hexaflouroisopropanol
Electrochemical dehalogenation of polyhalogenated compounds is an inefficient process as the working electrode is passivated by the deposition of short-chain polymers that form during the early stages of electrolysis. Herein, we report the use of 1, 1, 1, 3, 3, 3-hexaflouroisopropanol (HFIP) as an efficient reagent to control C–H formation over the radical association. Debromination of 1,6-dibromohexane was examined in the presence of Ni(II) salen and HFIP as the electrocatalyst and hydrogen atom source, respectively. Electrolysis of 10 mM 1,6-dibromohexane and 2 mM Ni(II) salen in the absence of HFIP yields 50% unreacted 1,6-dibromohexane and ∼40% unaccounted for starting material, whereas electrolysis with 50 mM HFIP affords 65%n-hexane. The mechanism of hydrogen atom incorporation was examined via deuterium incorporation coupled with high-resolution mass spectrometry, and density functional theory (DFT) calculations. Deuterium incorporation analysis revealed that the hydrogen atom originated from the secondary carbon of HFIP. DFT calculations showed that the deprotonation of hydroxyl moiety of HFIP, prior to the hydrogen atom transfer, is a key step for C–H formation. The scope of electrochemical dehalogenation was examined by electrolysis of 10 halogenated compounds. Our results indicate that through the use of HFIP, the formation of short-chain polymers is no longer observed, and monomer formation is the dominant product.
more »
« less
- Award ID(s):
- 2002158
- PAR ID:
- 10380488
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 169
- Issue:
- 11
- ISSN:
- 0013-4651
- Page Range / eLocation ID:
- Article No. 115502
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)In order to explore how specific atom-to-atom replacements change the electrostatic potentials on 1,3,4-chalcogenadiazole derivatives, and to deliberately alter the balance between intermolecular interactions, four target molecules were synthesized and characterized. DFT calculations indicated that the atom-to-atom substitution of Br with I, and S with Se enhanced the σ-hole potentials, thus increasing the structure directing ability of halogen bonds and chalcogen bonds as compared to intermolecular hydrogen bonding. The delicate balance between these intermolecular forces was further underlined by the formation of two polymorphs of 5-(4-iodophenyl)-1,3,4-thiadiazol-2-amine; Form I displayed all three interactions while Form II only showed hydrogen and chalcogen bonding. The results emphasize that the deliberate alterations of the electrostatic potential on polarizable atoms can cause specific and deliberate changes to the main synthons and subsequent assemblies in the structures of this family of compounds.more » « less
-
Flaherty, David W (Ed.)Urea is a common waste in agriculture runoff and has also been proposed as a promising oxidizable molecule in urea electrolysis for hydrogen production from wastewater. However, the overpotential of the electrochemical urea oxidation reaction (UOR) is high due to the complicated six-electron transfer process on most metal catalysts. The competition with oxygen evolution reaction (OER) further limits catalyst options for UOR. The most promising and studied catalysts for UOR are Ni-based catalysts. Here we study the reactivity of the basal β-NiOOH(001) surface for UOR and study the effects of metal doping (Mn, Fe, Co, and Cu) on the phase transformation from β-Ni(OH)2 to β-NiOOH, UOR, and OER pathways using density functional theory (DFT) calculations. The introduction of Mn and Fe dopants facilitates the formation of catalytically active β-NiOOH phase, and also favors the adsorption of urea compared to the undoped β-NiOOH surface, thereby significantly benefitting the overall UOR. Moreover, comparison of the effect of dopants on UOR and OER provides fundamental understanding of the competition between UOR and OER and how the dopants influence the reaction selectivity and competition. This work sheds light on the structure-property relationship of Ni-catalysts in urea oxidation and provides design principles for functional Ni-based materials, which will help accelerate the development of efficient UOR catalysts.more » « less
-
null (Ed.)Bimetallic bis-urea functionalized salen-aluminum catalysts have been developed for cyclic carbonate synthesis from epoxides and CO2. The urea moiety provides a bimetallic scaffold through hydrogen bonding, which expedites the cyclic carbonate formation reaction under mild reaction conditions. The turnover frequency (TOF) of the bis-urea salen Al catalyst is three times higher than that of a μ-oxo-bridged catalyst, and 13 times higher than that of a monomeric salen aluminum catalyst. The bimetallic reaction pathway is suggested based on urea additive studies and kinetic studies. Additionally, the X-ray crystal structure of a bis-urea salen Ni complex supports the self-assembly of the bis-urea salen metal complex through hydrogen bonding.more » « less
-
Increasing fossil fuel demands and growing concerns of global climate change have stimulated interest in the development of electrocatalysts to produce H 2 as an alternative zero-emission fuel from the electrolysis of water via hydrogen evolution reaction (HER). Precious or non-precious catalysts are typically loaded on high surface area carbon materials, and these supports play a critical role in both thermodynamics and kinetics of the HER. In this paper, we evaluate the electrocatalytic activity of a molecular hydrogen evolving catalyst, diacetyl-bis(4-methyl)-3-thiosemicarbazone Ni( ii ) (Ni-ATSM), on three different carbon surfaces: glassy carbon, carbon paste and pencil graphite. The overpotential for each modified electrode was benchmarked at a current density of −10 mA cm −2 . Carbon paste electrodes showed highest overpotentials (495 mV) compared to the other electrode surfaces. Polished pencil and glassy carbon modified electrodes performed similarly ( η = 395 mV for GCE and η = 400 mV for pencil). Pencil electrodes etched in acetone overnight prior to Ni-ATSM deposition produced lowest overpotentials ( η = 354 mV). Etching results in an increase in electroactive surface area and substantial decrease in the charge transfer resistance of the graphitic interface from 275 Ω to 50 Ω, verified using electrochemical impedance spectroscopy (EIS). Our studies demonstrate pencil graphite may serve as versatile, disposable, cost effective, and reproducible electrode surface for the evaluation of heterogeneous HER catalysts. Moreover, pencils can be easily cut with table saw to generate new surface for easy characterization of the surface such as electrochemistry, imaging and spectroscopy.more » « less
