An official website of the United States government
Bacterial biofilms represent a basic form of multicellular organization that confers survival advantages to constituent cells. The sequential stages of cell ordering during biofilm development have been studied in the pathogen and model biofilm-formerVibrio cholerae. It is unknown how spatial trajectories of individual cells and the collective motions of many cells drive biofilm expansion. We developed dual-view light-sheet microscopy to investigate the dynamics of biofilm development from a founder cell to a mature three-dimensional community. Tracking of individual cells revealed two distinct fates: one set of biofilm cells expanded ballistically outward, while the other became trapped at the substrate. A collective fountain-like flow transported cells to the biofilm front, bypassing members trapped at the substrate and facilitating lateral biofilm expansion. This collective flow pattern was quantitatively captured by a continuum model of biofilm growth against substrate friction. Coordinated cell movement required the matrix protein RbmA, without which cells expanded erratically. Thus, tracking cell lineages and trajectories in space and time revealed how multicellular structures form from a single founder cell.
more »
« less
Spreading rates of bacterial colonies depend on substrate stiffness and permeability
Abstract The ability of bacteria to colonize and grow on different surfaces is an essential process for biofilm development. Here, we report the use of synthetic hydrogels with tunable stiffness and porosity to assess physical effects of the substrate on biofilm development. Using time-lapse microscopy to track the growth of expanding Serratia marcescens colonies, we find that biofilm colony growth can increase with increasing substrate stiffness, unlike what is found on traditional agar substrates. Using traction force microscopy-based techniques, we find that biofilms exert transient stresses correlated over length scales much larger than a single bacterium, and that the magnitude of these forces also increases with increasing substrate stiffness. Our results are consistent with a model of biofilm development in which the interplay between osmotic pressure arising from the biofilm and the poroelastic response of the underlying substrate controls biofilm growth and morphology.
more »
« less
- PAR ID:
- 10380502
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- PNAS Nexus
- Volume:
- 1
- Issue:
- 1
- ISSN:
- 2752-6542
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Biofilms can increase pathogenic contamination of drinking water, cause biofilm‐related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early‐stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early‐stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early‐stagePseudomonas putidabiofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early‐stage biofilm growth is suppressed under high flow conditions and that the local velocity for early‐stageP. putidabiofilms (growth time < 14 h) to develop is about 50 μm/s, which is similar toP. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early‐stage biofilms by increasing the area of the low‐flow region. Furthermore, we show that the critical average shear stress, above which early‐stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early‐stage biofilm development, characterized in this study, will facilitate future predictions and managements of early‐stageP. putidabiofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments.more » « less
-
AbstractMycelium is crucial in decomposing biomass and cycling nutrients in nature. While various environmental factors can influence mycelium growth, the role of substrate mechanics is not yet clear. In this study, we investigate the effect of substrate stiffness on mycelium growth. We prepared agar substrates of different concentrations to grow the mycelium, but kept other environmental and chemical conditions consistent. We made a time-lapse recording of the growing history with minimum interruption. We repeated our tests for different species. Our results generally support that mycelium grows faster on a stiffer substrate,Ganoderma lucidumgives the highest growth rate andPleurotus eryngiiis most sensitive to substrate stiffness. We combined experimental characterization and computational simulation to investigate the mechanism and discovered that mycelium concentrates on the surface of a rigid substrate, but penetrates the soft one. Our Monte Carlo simulations illustrate that such a penetration allows mycelium to grow in the three-dimensional space, but effectively slows down the surface occupation speed. Our study provides insights into fungal growth and reveals that the mycelium growth rate can be tuned through substrate stiffness, thus reducing the time for producing mycelium-based composites. Impact statementWe used agar substrates and tuned its stiffness to culture mycelium and compared tune its stiffness to culture mycelium and compare its growth in a well-controlled condition. Our results revealed that mycelium grows faster on stiffer substrates, thus fully occupying the petri dish surface more quickly. We repeated our study several times by testing four species,P. eryngii,G. lucidum,Trametes versicolor,and Flammulina velutipes,and the stiffest substrate always gives the highest mean growing rate than others. TheG. lucidumshows the highest spreading rate that is obtained on the stiffest substrate as 39.1 ± 2.0 mm2/h. We found that the mycelium on a soft substrate will grow into the substrate instead of spreading on the stiffer surface. Our Monte Carlo simulations further show that once the fibers grow into a three-dimensional substrate, its growth is slower than growing on a two-dimensional surface, providing a microscopic mechanism of the substrate stiffness effect. This study’s analysis of how substrate stiffness impacts mycelium growth is new, bridging a critical knowledge gap in understanding the relationship between substrate mechanics and fungal ecology. The knowledge from this study has a potential in accelerating sustainable manufacturing of mycelium-based composite by adjusting substrate mechanics. Graphical Abstractmore » « less
-
van_Kessel, Julia C (Ed.)ABSTRACT Bacterial motility plays a crucial role in biofilm development, yet the underlying mechanism remains not fully understood. Here, we demonstrate that the flagellum-driven motility ofPseudomonas aeruginosaenhances biofilm formation by altering the orientation of bacterial cells, an effect controlled by shear stress rather than shear rate. By tracking wild-typeP. aeruginosaand its non-motile mutants in a microfluidic channel, we demonstrate that while non-motile cells align with the flow, many motile cells can orient toward the channel sidewalls, enhancing cell surface attachment and increasing biofilm cell density by up to 10-fold. Experiments with varying fluid viscosities further demonstrate that bacterial swimming speed decreases with increasing fluid viscosity, and the cell orientation scales with the shear stress rather than shear rate. Our results provide a quantitative framework to predict the role of motility in the orientation and biofilm development under different flow conditions and viscosities.IMPORTANCEBiofilms are ubiquitous in rivers, water pipes, and medical devices, impacting the environment and human health. While bacterial motility plays a crucial role in biofilm development, a mechanistic understanding remains limited, hindering our ability to predict and control biofilms. Here, we reveal how the motility ofPseudomonas aeruginosa, a common pathogen, influences biofilm formation through systematically controlled microfluidic experiments with confocal and high-speed microscopy. We demonstrate that the orientation of bacterial cells is controlled by shear stress. While non-motile cells primarily align with the flow, many motile cells overcome the fluid shear forces and reorient toward the channel sidewalls, increasing biofilm cell density by up to 10-fold. Our findings provide insights into how bacterial transition from free-swimming to surface-attached states under varying flow conditions, emphasizing the role of cell orientation in biofilm establishment. These results enhance our understanding of bacterial behavior in flow environments, informing strategies for biofilm management and control.more » « less
-
Atherosclerosis-related cardiovascular diseases are a leading cause of mortality worldwide. Vascular smooth muscle cells (VSMCs) comprise the medial layer of the arterial wall and undergo phenotypic switching during atherosclerosis to a synthetic phenotype capable of proliferation and migration. The surrounding environment undergoes alterations in extracellular matrix (ECM) stiffness and composition in addition to an increase in addition to an increase in cholesterol content. Using an atherosclerotic murine model, we analyzed how the mechanics of VSMCs isolated from western diet fed apolipoprotein-E knockout (ApoE -/- ) and wild type (WT) mice were altered during atherosclerosis. Increased stiffness of ApoE -/- VSMCs correlated with a greater degree of stress fiber alignment as evidenced by atomic force microscopy (AFM)-generated force maps and stress fiber topography images. On type-1 collagen (COL1)-coated polyacrylamide (PA) gels of varying stiffness, WT VSMCs had higher adhesion forces to N-Cadherin (N-Cad) and COL1. ApoE -/- VSMC stiffness was significantly greater than WT cells with increased cell stiffness with increasing substrate stiffness for both ApoE -/- and WT VSMCs . In addition, ApoE -/- VSMCs showed an enhanced migration capability on COL1-coated substrates and a general decreasing trend in migration capacity with increasing substrate stiffness, correlating with the lower adhesion forces as compared to WT VSMCs. Altogether, these results demonstrate the potential contribution of the alteration in VSMC mechanics in the development of atherosclerosis.more » « less
