An official website of the United States government
Mycelium-based materials have seen a surge in popularity in the manufacturing industry in recent years. This study aims to build a lab-scale experimental facility to investigate mycelium growth under a well-controlled temperature and humidity environment and explore how substrates of very different chemical and mechanical properties can affect the microscopic morphology of the mycelium fibers during growth. Here, we design and build a customized green tent with good thermal and humidity insulation for controlling the temperature and humidity and monitor the environmental data with an Arduino chip. We develop our procedure to grow mycelium from spores to fibrous networks. It is shown that a hydrogel substrate with soluble nutrition is more favorite for mycelium growth than a hardwood board and leads to higher growing speed. We take many microscopic images of the mycelium fibers on the hardwood board and the hydrogel substrate and found no significant difference in diameter (∼3 μm). This research provides a foundation to explore the mechanism of mycelium growth and explore the environmentally friendly and time-efficient method of its growth.
more »
« less
Stiff substrate increases mycelium growth rate on surface
AbstractMycelium is crucial in decomposing biomass and cycling nutrients in nature. While various environmental factors can influence mycelium growth, the role of substrate mechanics is not yet clear. In this study, we investigate the effect of substrate stiffness on mycelium growth. We prepared agar substrates of different concentrations to grow the mycelium, but kept other environmental and chemical conditions consistent. We made a time-lapse recording of the growing history with minimum interruption. We repeated our tests for different species. Our results generally support that mycelium grows faster on a stiffer substrate,Ganoderma lucidumgives the highest growth rate andPleurotus eryngiiis most sensitive to substrate stiffness. We combined experimental characterization and computational simulation to investigate the mechanism and discovered that mycelium concentrates on the surface of a rigid substrate, but penetrates the soft one. Our Monte Carlo simulations illustrate that such a penetration allows mycelium to grow in the three-dimensional space, but effectively slows down the surface occupation speed. Our study provides insights into fungal growth and reveals that the mycelium growth rate can be tuned through substrate stiffness, thus reducing the time for producing mycelium-based composites. Impact statementWe used agar substrates and tuned its stiffness to culture mycelium and compared tune its stiffness to culture mycelium and compare its growth in a well-controlled condition. Our results revealed that mycelium grows faster on stiffer substrates, thus fully occupying the petri dish surface more quickly. We repeated our study several times by testing four species,P. eryngii,G. lucidum,Trametes versicolor,and Flammulina velutipes,and the stiffest substrate always gives the highest mean growing rate than others. TheG. lucidumshows the highest spreading rate that is obtained on the stiffest substrate as 39.1 ± 2.0 mm2/h. We found that the mycelium on a soft substrate will grow into the substrate instead of spreading on the stiffer surface. Our Monte Carlo simulations further show that once the fibers grow into a three-dimensional substrate, its growth is slower than growing on a two-dimensional surface, providing a microscopic mechanism of the substrate stiffness effect. This study’s analysis of how substrate stiffness impacts mycelium growth is new, bridging a critical knowledge gap in understanding the relationship between substrate mechanics and fungal ecology. The knowledge from this study has a potential in accelerating sustainable manufacturing of mycelium-based composite by adjusting substrate mechanics. Graphical Abstract
more »
« less
- Award ID(s):
- 2145392
- PAR ID:
- 10533825
- Publisher / Repository:
- Cambridge University Press (CUP)
- Date Published:
- Journal Name:
- MRS Bulletin
- Volume:
- 49
- Issue:
- 12
- ISSN:
- 0883-7694
- Format(s):
- Medium: X Size: p. 1205-1216
- Size(s):
- p. 1205-1216
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The ability of bacteria to colonize and grow on different surfaces is an essential process for biofilm development. Here, we report the use of synthetic hydrogels with tunable stiffness and porosity to assess physical effects of the substrate on biofilm development. Using time-lapse microscopy to track the growth of expanding Serratia marcescens colonies, we find that biofilm colony growth can increase with increasing substrate stiffness, unlike what is found on traditional agar substrates. Using traction force microscopy-based techniques, we find that biofilms exert transient stresses correlated over length scales much larger than a single bacterium, and that the magnitude of these forces also increases with increasing substrate stiffness. Our results are consistent with a model of biofilm development in which the interplay between osmotic pressure arising from the biofilm and the poroelastic response of the underlying substrate controls biofilm growth and morphology.more » « less
-
Local substrate stiffness is one of the major mechanical inputs for tissue organization during its development and remodeling. It is widely recognized that adherent cells use transmembrane proteins (integrins) at focal adhesions to translate ECM mechanical cues into intracellular bioprocess. Here we show that epithelial cells respond to substrate stiffening primarily via actin cytoskeleton organization, that requires activation of mechanosensitive Piezo1 channels. Piezo1 Knockdown cells eliminated the actin stress fibers that formed on stiff substrates, while it had minimal effect on cell morphology and spreading area. Inhibition of Piezo1 channels with GsMTx4 also significantly reduced stiffness-induced F-actin reorganization, suggesting Piezo1 mediated cation current plays a role. Activation of Piezo1 channels with specific agonist (Yoda1) resulted in thickening of F-actin fibers and enlargement of FAs on stiffer substrates, whereas it did not affect the formation of nascent FAs that facilitate spreading on the soft substrates. These results demonstrate that Piezo1 functions as a force sensor that couples with actin cytoskeleton to distinguish the substrate stiffness and facilitate epithelial adaptive remodeling.more » « less
-
Abstract Mechanical cues from the extracellular matrix (ECM) regulate vascular endothelial cell (EC) morphology and function. Since naturally derived ECMs are viscoelastic, cells respond to viscoelastic matrices that exhibit stress relaxation, in which a cell‐applied force results in matrix remodeling. To decouple the effects of stress relaxation rate from substrate stiffness on EC behavior, we engineered elastin‐like protein (ELP) hydrogels in which dynamic covalent chemistry (DCC) was used to crosslink hydrazine‐modified ELP (ELP‐HYD) and aldehyde/benzaldehyde‐modified polyethylene glycol (PEG‐ALD/PEG‐BZA). The reversible DCC crosslinks in ELP‐PEG hydrogels create a matrix with independently tunable stiffness and stress relaxation rate. By formulating fast‐relaxing or slow‐relaxing hydrogels with a range of stiffness (500–3300 Pa), we examined the effect of these mechanical properties on EC spreading, proliferation, vascular sprouting, and vascularization. The results show that both stress relaxation rate and stiffness modulate endothelial spreading on two‐dimensional substrates, on which ECs exhibited greater cell spreading on fast‐relaxing hydrogels up through 3 days, compared with slow‐relaxing hydrogels at the same stiffness. In three‐dimensional hydrogels encapsulating ECs and fibroblasts in coculture, the fast‐relaxing, low‐stiffness hydrogels produced the widest vascular sprouts, a measure of vessel maturity. This finding was validated in a murine subcutaneous implantation model, in which the fast‐relaxing, low‐stiffness hydrogel produced significantly more vascularization compared with the slow‐relaxing, low‐stiffness hydrogel. Together, these results suggest that both stress relaxation rate and stiffness modulate endothelial behavior, and that the fast‐relaxing, low‐stiffness hydrogels supported the highest capillary density in vivo.more » « less
-
Abstract There is a tremendous interest in developing hydrogels as tunable in vitro cell culture platforms to study cell response to mechanical cues in a controlled manner. However, little is known about how common cell culture techniques, such as serial expansion on tissue culture plastic, affect subsequent cell behavior when cultured on hydrogels. In this work, a methacrylated hyaluronic acid hydrogel platform is leveraged to study stromal cell mechanotransduction. Hydrogels are first formed through thiol‐Michael addition to model normal soft tissue (e.g., lung) stiffness (E ≈ 1 kPa). Secondary cross‐linking via radical photopolymerization of unconsumed methacrylates allows matching of early‐ (E ≈ 6 kPa) and late‐stage fibrotic tissue (E ≈ 50 kPa). Early passage (P1) human bone marrow mesenchymal stromal cells (hMSCs) display increased spreading, myocardin‐related transcription factor‐A (MRTF‐A) nuclear localization, and focal adhesion size with increasing hydrogel stiffness. However, late passage (P5) hMSCs show reduced sensitivity to substrate mechanics with lower MRTF‐A nuclear translocation and smaller focal adhesions on stiffer hydrogels compared to early passage hMSCs. Similar trends are observed in an immortalized human lung fibroblast line. Overall, this work highlights the implications of standard cell culture practices on investigating cell response to mechanical signals using in vitro hydrogel models.more » « less
