Rechargeable Li-CO2batteries have emerged as promising candidates for next generation batteries due to their low cost, high theoretical capacity, and ability to capture the greenhouse gas CO2. However, these batteries still face challenges such as slow reaction kinetic and short cycle performance due to the accumulation of discharge products. To address this issue, it is necessary to design and develop high efficiency electrocatalysts that can improve CO2reduction reaction. In this study, we report the use of NiMn2O4electrocatalysts combined with multiwall carbon nanotubes as a cathode material in the Li-CO2batteries. This combination proved effective in decomposing discharge products and enhancing cycle performance. The battery shows stable discharge–charge cycles for at least 30 cycles with a high limited capacity of 1000 mAh g−1at current density of 100 mA g−1. Furthermore, the battery with the NiMn2O4@CNT catalyst exhibits a reversible discharge capacity of 2636 mAh g−1. To gain a better understanding of the reaction mechanism of Li-CO2batteries, spectroscopies and microscopies were employed to identify the chemical composition of the discharge products. This work paves a pathway to increase cycle performance in metal-CO2batteries, which could have significant implications for energy storage and the reduction of greenhouse gas emissions. 
                        more » 
                        « less   
                    
                            
                            Electrochemical CO 2 Reduction in the Presence of Impurities: Influences and Mitigation Strategies
                        
                    
    
            Abstract The electrochemical conversion of waste CO2into useful fuels and chemical products is a promising approach to reduce CO2emissions; however, several challenges still remain to be addressed. Thus far, most CO2reduction studies use pure CO2as the gas reactant, but CO2emissions typically contain a number of gas impurities, such as nitrogen oxides, oxygen gas, and sulfur oxides. Gas impurities in CO2can pose a significant obstacle for efficient CO2electrolysis because they can influence the reaction and catalyst. This Minireview highlights early examples of CO2reduction studies using mixed‐gas feeds, explores strategies to sustain CO2reduction in the presence of gas impurities, and discusses their implications for future progress in this emerging field. 
        more » 
        « less   
        
    
                            - Award ID(s):
- 2028351
- PAR ID:
- 10380592
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie International Edition
- Volume:
- 61
- Issue:
- 52
- ISSN:
- 1433-7851
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
- 
            
- 
            Abstract Annual carbon dioxide (CO2) emissions from the U.S. power sector decreased 24% from 2000 to 2018, while carbon intensity (CO2per unit of electricity generated) declined by 34%. These reductions have been attributed in part to a shift from coal to natural gas, as gas‐fired plants emit roughly half the CO2emissions as coal plants. To date, no analysis has looked at the coal‐to‐gas shift from the perspective of commitment accounting—the cumulative future CO2emissions expected from power infrastructure. We estimate that between 2000 and 2018, committed emissions in the U.S. power sector decreased 12% (six GtCO2), from 49 to 43 GtCO2, assuming average generator lifetimes and capacity factors. Taking into consideration methane leakage during the life cycle of coal and gas plants, this decrease in committed emissions is further offset (e.g., assuming a 3% leakage rate, there is effectively no reduction at all). Thus, although annual emissions have fallen, cumulative future emissions will not be substantially lower unless existing coal and gas plants operate at significantly lower rates than they have historically. Moreover, our estimates of committed emissions for U.S. coal and gas plants finds steep reductions in plant use and/or early retirements are already needed for the country to meet its targets under the Paris climate agreement—even if no new fossil capacity is added.more » « less
- 
            Abstract An extensive set of primary and secondary pollutants was measured at a ground site in a remote location in the Yellow River Delta, China during the Ozone Photochemistry and Export from China Experiment (OPECE) from March to April 2018. The measurements include volatile organic compounds (VOCs), peroxyacyl nitrates (PANs), ozone (O3), particulate species, nitrogen oxides (NOx), and SO2. Observed VOC mixing ratios were comparable to those measured in heavily polluted cities in the U.S. and China. The VOC source signatures suggest a strong influence from Oil and Natural Gas (O&NG) emissions with potentially large contributions from Liquified Petroleum Gas (LPG) sources as well. Consistently elevated concentrations of O3, PAN, and its rarely measured homologs peroxybenzoylic nitric anhydride (PBzN) and peroxyacrylic nitric anhydride (APAN) at the OPECE site indicate complex photochemistry in a heterogeneous VOC environment. Diagnostic 0‐D box model simulations are used to investigate the budgets of ROx(OH + HO2 + RO2), and the rate and efficiency of O3production. Model sensitivity calculations indicate that O3production at OPECE site is VOC limited in spring. This suggests that reduction in VOCs should be a priority for reducing O3, where production and fugitive emissions from O&NG provide an attractive target. While initial reductions in NOxmight increase O3production, reduction of NOxalong with VOCs will be a necessary step to achieve long‐term ozone reduction.more » « less
- 
            Abstract Oil and gas production regions are significant sources of greenhouse gases and reactive pollutants such as nitrogen oxides (NOx) and volatile organic compounds. Research has also shown that methane (CH4) emissions reported to the Environmental Protection Agency's (EPA) Greenhouse Gas Reporting Program (GHGRP) are generally underestimated. The Arctic accounted for 5.5% of global oil and gas production in 2022 but is estimated to contain significant undiscovered resources. The emitted NOxand volatile organic compounds can impact the composition and chemistry of the Arctic atmosphere. The Prudhoe Bay Oil Field in Alaska is one of the 10 largest oil fields in the US and has been approved for significant development expansion. However, only one recent study has reported measurements of its greenhouse gas emissions. We estimate the emission rates for carbon dioxide (CO2), CH4, and NOxfrom the Prudhoe Bay Oil Field during the spring of 2022 using airborne mass balance methods and emission ratios. We also discuss emissions per energy produced and show an increase over time, with values higher than the national average for oil and gas producing regions, though within uncertainties. Our estimates are lower than the NOxemission estimate reported in the National Emissions Inventory (NEI), as seen in other oil and gas studies, but fall within the uncertainty range of the greenhouse gases reported in the GHGRP. This work provides a valuable snapshot of emissions before further expansion of extraction activities.more » « less
- 
            Abstract Converting CO2into industrially useful products is an appealing strategy for utilization of an abundant chemical resource. Electrochemical CO2reduction (eCO2R) offers a pathway to convert CO2into CO and ethylene, using renewable electricity. These products can be efficiently copolymerized by organometallic catalysts to generate polyketones. However, the conditions for these reactions are very different, presenting the challenge of coupling microenvironments typically encountered for the transformation of CO2into highly complex but desirable multicarbon products. Herein, we present a system to produce polyketone plastics entirely derived from CO2and water, where both the CO and C2H4intermediates are produced by eCO2R. In this system, a combination of Cu and Ag gas diffusion electrodes is used to generate a gas mixture with nearly equal concentrations of CO and C2H4, and a recirculatory CO2reduction loop is used to reach concentrations of above 11% each, leading to a current‐to‐polymer efficiency of up to 51% and CO2utilization of 14%.more » « less
 An official website of the United States government
An official website of the United States government 
				
			 
					 
					
