One of the primary sources of micronutrients to the sea surface in remote ocean regions is the deposition of atmospheric dust. Geographic patterns in biogeochemical processes such as primary production and nitrogen fixation that require micronutrients like iron (Fe) are modulated in part by the spatial distribution of dust supply. Global models of dust deposition rates are poorly calibrated in the open ocean, owing to the difficulty of determining dust fluxes in sparsely sampled regions. We present new estimates of dust and Fe input rates from measurements of dissolved and particulate thorium isotopes230Th and232Th on the
North African dust is known to be deposited in the Gulf of Mexico, but its deposition rate and associated supply of lithogenic dissolved metals, such as the abiotic metal thorium or the micronutrient metal iron, have not been well‐quantified.232Th is an isotope with similar sources as iron and its input can be quantified using radiogenic230Th. By comparing dissolved232Th fluxes at three sites in the northern Gulf of Mexico with upwind sites in the North Atlantic, we place an upper bound on North African dust contributions to232Th and Fe in the Gulf of Mexico, which is about 30% of the total input. Precision on this bound is hindered by uncertainty in the relative rates of dust deposition in the North Atlantic and the northern Gulf of Mexico. Based on available radium data, shelf sources, including rivers, submarine groundwater discharge, and benthic sedimentary releases are likely as important if not more important than dust in the budget of lithogenic metals in the Gulf of Mexico. In other words, it is likely there is no one dominant source of Th and Fe in the Gulf of Mexico. Finally, our estimated Fe input in the northern Gulf of Mexico implies an Fe residence time of less than 6 months, similar to that in the North Atlantic despite significantly higher supply rates in the Gulf of Mexico.
more » « less- NSF-PAR ID:
- 10380596
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Oceans
- Volume:
- 127
- Issue:
- 4
- ISSN:
- 2169-9275
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract FS Sonne SO245 section (GEOTRACES process study GPpr09) in the South Pacific. We first discuss high‐resolution upper water column profiles of Th isotopes and the implications for the systematics of dust flux reconstructions from seawater Th measurements. We find dust fluxes in the center of the highly oligotrophic South Pacific Gyre that are the lowest of any mean annual dust input rates measured in the global oceans, but that are 1–2 orders of magnitude higher than those estimated by global dust models. We also determine dust‐borne Fe fluxes and reassess the importance of individual Fe sources to the surface South Pacific Gyre, finding that dust dissolution, not vertical or lateral diffusion, is the primary Fe source. Finally, we combine our estimates of Fe flux in dust with previously published cellular and enzymatic quotas to determine theoretical upper limits on annual average nitrogen fixation rates for a given Fe deposition rate. -
more » « less
Abstract Sinking particles strongly regulate the distribution of reactive chemical substances in the ocean, including particulate organic carbon and other elements (e.g., P, Cd, Mn, Cu, Co, Fe, Al, and232Th). Yet, the sinking fluxes of trace elements have not been well described in the global ocean. The U.S. GEOTRACES campaign in the North Atlantic (GA03) offers the first data set in which the sinking flux of carbon and trace elements can be derived using four different radionuclide pairs (238U:234Th;210Pb:210Po;228Ra:228Th; and234U:230Th) at stations co‐located with sediment trap fluxes for comparison. Particulate organic carbon, particulate P, and particulate Cd fluxes all decrease sharply with depth below the euphotic zone. Particulate Mn, Cu, and Co flux profiles display mixed behavior, some cases reflecting biotic remineralization, and other cases showing increased flux with depth. The latter may be related to either lateral input of lithogenic material or increased scavenging onto particles. Lastly, particulate Fe fluxes resemble fluxes of Al and232Th, which all have increasing flux with depth, indicating a dominance of lithogenic flux at depth by resuspended sediment transported laterally to the study site. In comparing flux estimates derived using different isotope pairs, differences result from different timescales of integration and particle size fractionation effects. The range in flux estimates produced by different methods provides a robust constraint on the true removal fluxes, taking into consideration the independent uncertainties associated with each method. These estimates will be valuable targets for biogeochemical modeling and may also offer insight into particle sinking processes.
-
more » « less
Abstract Observations of dissolved iron (dFe) in the subtropical North Atlantic revealed remarkable features: While the near‐surface dFe concentration is low despite receiving high dust deposition, the subsurface dFe concentration is high. We test several hypotheses that might explain this feature in an ocean biogeochemistry model with a refined Fe cycling scheme. These hypotheses invoke a stronger lithogenic scavenging rate, rapid biological uptake, and a weaker binding between Fe and a ubiquitous, refractory ligand. While the standard model overestimates the surface dFe concentration, a 10‐time stronger biological uptake run causes a slight reduction in the model surface dFe. A tenfold decrease in the binding strength of the refractory ligand, suggested by recent observations, starts reproducing the observed dFe pattern, with a potential impact for the global nutrient distribution. An extreme value for the lithogenic scavenging rate can also match the model dFe with observations, but this process is still poorly constrained.
-
more » « less
Abstract Re‐examination of previously published dissolved iron time‐series data from Ocean Station Papa in the central Gulf of Alaska (GoA) reveals 33%–70% increases in the dissolved iron inventories occurring between September and February of successive years, implying a source of Fe to this region during autumn or early winter. Because I can virtually rule out many possible iron sources at this time of year, I suggest Alaskan glacial dust is the likely iron source. Large plumes of such dust are known to be generated regularly in the autumn by anomalous offshore winds and channeled through mountain gaps, simultaneously from several locations spanning ∼1,000 km of the northern Gulf of Alaska coastline. Large dust flux events occur when below‐freezing, low‐humidity air temperatures persist for many days during the autumn. I suggest that existing state‐of‐the‐art global dust models fail to reproduce this Alaskan dust flux because the model spatial resolution is too coarse to resolve the high winds through the narrow mountain gaps that generate the dust. Future work that could help to confirm this Fe source to the central GoA includes time‐series profiles of iron concentrations, and ancillary information from sensor‐equipped profiling floats. If this mechanism of Fe supply to the central GoA were confirmed, it would imply this Alaskan dust is transported ≥1,100 km from the coast, more than twice as far as has been visually documented from satellite observations.
-
more » « less
Abstract Aluminum (Al) is delivered to surface ocean waters by aeolian dust, making it a promising tracer to constrain dust deposition rates and the atmospheric supply of trace metal micronutrients. Over recent years, dissolved Al has been mapped along the GEOTRACES transects, providing unparalleled coverage of the world ocean. However, inferring atmospheric input rates from these observations is complicated by a suite of additional processes that influence the Al distribution, including reversible particle scavenging, biological uptake by diatoms, hydrothermal sources, sediment resuspension. Here we employ a data‐assimilation model of the oceanic Al cycle that explicitly accounts for these processes, allowing the atmospheric signal to be extracted. We conduct an ensemble of model optimizations that test different dust deposition distributions and consider spatial variations in Al solubility, thereby inferring the atmospheric Al supply that is most consistent with GEOTRACES observations. We find that 37.2 ± 11.0 Gmol/yr of soluble Al is added to the global ocean, dominated in the Atlantic Ocean, and that Al fractional solubility varies strongly as a function of atmospheric dust concentration. Our model also suggests that 6.1 ± 2.4 Gmol Al/yr is injected from hydrothermal vents, and that vertical Al redistribution through the water column is dominated by abiotic reversible scavenging rather than uptake by diatoms. Our results have important implications for the oceanic iron (Fe) budget: based on the soluble Fe:Al ratio of dust, we infer that aeolian Fe inputs lie between 3.82 and 9.25 Gmol/yr globally, and fall short of the biological Fe demand in most ocean regions.
