skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Interrogating the Effect of Assay Media on the Rate of Virus Inactivation of High‐Touch Copper Surfaces: A Materials Science Approach
Title: Interrogating the Effect of Assay Media on the Rate of Virus Inactivation of High‐Touch Copper Surfaces: A Materials Science Approach
Abstract

Contamination of high‐touch surfaces with infected droplets of bodily secretions is a known route of virus transmission. Copper surfaces have been reported to inactivate human coronaviruses after several minutes, via the release of Cu cations. Utilization of copper alloys for high‐touch surfaces can be a pivotal preemptive strategy for preventing the next pandemic. Understanding the true efficacy by which copper, and copper alloys, inactivate the virus under realistic conditions is essential for tuning intrinsic alloy features such as composition, grain orientation, and surface attributes, to optimize for antiviral function. However, virus inactivation measurements depend on the presence of an assay media (AM) solution as a carrier for the virus, and its effects on the surface properties of pure copper that regulate oxidative copper release are previously unknown. Herein, these properties and the influence of AM on the efficacy of virus inactivation occurring on the surface of pure copper are investigated. The process is uncovered by which a five‐fold decrease in virus half‐life is observed in simulated real‐life conditions, relative to exposure to traditional AM. The investigation highlights the notion that virus inactivation on copper surfaces may be significantly more effective than previously thought.

  more » « less
Award ID(s):
2040273
NSF-PAR ID:
10445940
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials Interfaces
Volume:
9
Issue:
17
ISSN:
2196-7350
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ( , Environmental Science & Technology)
    null (Ed.)
    UV254 disinfection strategies are commonly applied to inactivate pathogenic viruses in water, food, air, and on surfaces. There is a need for methods that rapidly predict the kinetics of virus inactivation by UV254, particularly for emerging and difficult-to-culture viruses. We conducted a systematic literature review of inactivation rate constants for a wide range of viruses. Using these data and virus characteristics, we developed and evaluated linear and nonlinear models for predicting inactivation rate constants. Multiple linear regressions performed best for predicting the inactivation kinetics of (+) ssRNA and dsDNA viruses, with cross-validated root mean squared relative prediction errors similar to those associated with experimental rate constants. We tested the models by predicting and measuring inactivation rate constants of a (+) ssRNA mouse coronavirus and a dsDNA marine bacteriophage; the predicted rate constants were within 7% and 71% of the experimental rate constants, respectively, indicating that the prediction was more accurate for the (+) ssRNA virus than the dsDNA virus. Finally, we applied our models to predict the UV254 rate constants of several viruses for which high-quality UV254 inactivation data are not available. Our models will be valuable for predicting inactivation kinetics of emerging or difficult-to-culture viruses. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al ( , Advanced Science)
    Abstract

    The outbreak of 2019 coronavirus disease (COVID‐19), caused by severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2), has resulted in a global pandemic. Despite intensive research, the current treatment options show limited curative efficacies. Here the authors report a strategy incorporating neutralizing antibodies conjugated to the surface of a photothermal nanoparticle (NP) to capture and inactivate SARS‐CoV‐2. The NP is comprised of a semiconducting polymer core and a biocompatible polyethylene glycol surface decorated with high‐affinity neutralizing antibodies. The multifunctional NP efficiently captures SARS‐CoV‐2 pseudovirions and completely blocks viral infection to host cells in vitro through the surface neutralizing antibodies. In addition to virus capture and blocking function, the NP also possesses photothermal function to generate heat following irradiation for inactivation of virus. Importantly, the NPs described herein significantly outperform neutralizing antibodies at treating authentic SARS‐CoV‐2 infection in vivo. This multifunctional NP provides a flexible platform that can be readily adapted to other SARS‐CoV‐2 antibodies and extended to novel therapeutic proteins, thus it is expected to provide a broad range of protection against original SARS‐CoV‐2 and its variants.

     
    more » « less
  3. ; ; ; ; ; ; ; ; ( , Scientific Reports)
    Abstract

    The biocidal properties of gecko skin and cicada wings have inspired the synthesis of synthetic surfaces decorated with high aspect ratio nanostructures that inactivate microorganisms. Here, we investigate the bactericidal activity of oriented zinc phthalocyanine (ZnPc) nanopillars grown using a simple pencil-drawn graphite templating technique. By varying the evaporation time, nanopillars initiated from graphite that was scribbled using a pencil onto silicon substrates were optimized to yield a high inactivation of the Gram-negative bacteria,Escherichia coli. We next adapted the procedure so that analogous nanopillars could be grown from pencil-drawn graphite scribbled onto stainless steel, flexible polyimide foil, and glass substrates. Time-dependent bacterial cytotoxicity studies indicate that the oriented nanopillars grown on all four substrates inactivated up to 97% of theE. coliquickly, in 15 min or less. These results suggest that organic nanostructures, which can be easily grown on a broad range of substrates hold potential as a new class of biocidal surfaces that kill microbes quickly and potentially, without spreading antibiotic-resistance genes.

     
    more » « less
  4. ; ; ; ; ( , npj Clean Water)
    Abstract

    Clean water free of bacteria is a precious resource in areas where no centralized water facilities are available. Conventional chlorine disinfection is limited by chemical transportation, storage, and the production of carcinogenic by-products. Here, a smartphone-powered disinfection system is developed for point-of-use (POU) bacterial inactivation. The integrated system uses the smartphone battery as a power source, and a customized on-the-go (OTG) hardware connected to the phone to realize the desired electrical output. Through a downloadable mobile application, the electrical output, either constant current (20–1000 µA) or voltage (0.7–2.1 V), can be configured easily through a user-friendly graphical interface on the screen. The disinfection device, a coaxial-electrode copper ionization cell (CECIC), inactivates bacteria by low levels of electrochemically generated copper with low energy consumption. The strategy of constant current control is applied in this study to solve the problem of uncontrollable copper release by previous constant voltage control. With the current control, a high inactivation efficiency ofE. coli(~6 logs) is achieved with a low level of effluent Cu (~200 µg L−1) in the water samples within a range of salt concentration (0.2–1 mmol L−1). The smartphone-based power workstation provides a versatile and accurate electrical output with a simple graphical user interface. The disinfection device is robust, highly efficient, and does not require complex equipment. As smartphones are pervasive in modern life, the smartphone-powered CECIC system could provide an alternative decentralized water disinfection approach like rural areas and outdoor activities.

     
    more » « less
  5. ; ; ( , Journal of mechanical behavior of biomedical materials)
    null (Ed.)
    Recent advances in the processing of wear-resistant calcium-phosphate reinforced CoCrMo composites for articulating surface applications has necessitated further investigation of performance in biological conditions relevant to patient applications. To this end, CoCrMo composites containing calcium phosphate in the form of hydroxyapatite (HA) were manufactured to study the influence of the reinforcing phase on the tribofilm formation in biologically-relevant conditions. The CoCrMo-HA composites were processed using a laser engineered net shaping (LENS™) additive manufacturing (AM) system with three distinctive compositions: CoCrMo-0%HA, CoCrMo-1%HA, and CoCrMo-3%HA. Extensive wear testing of the CoCrMo-HA composites was carried out in DMEM (cell media) and DMEM + Hyaluronic acid (found naturally in synovial fluid). Wear tests were performed at loads ranging from 5N to 20N, and wear media was measured post-test using ICP-MS techniques for the release of Co and Cr ions. During testing, all coefficients of friction remained in the 0.15-0.25 range, which was lower than the previously reported 0.50-0.75 range in DI water, indicating that the DMEM + hyaluronic acid media plays a significant role in reducing frictional contact. At loads higher than 15N, the HA-tribofilm exhibited a breakdown resulting in higher wear rates but still lower overall ion release in comparison to the CoCrMo control composition. Our results indicate that CoCrMo alloys with HA addition can significantly reduce wear rates and ion release even in the presence of naturally-occurring synovial-fluid friction-reducing constituents. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email