[Mn(bpy)(CO) 3 Br] is recognized as a benchmark electrocatalyst for CO 2 reduction to CO, with the doubly reduced [Mn(bpy)(CO) 3 ] − proposed to be the active species in the catalytic mechanism. The reaction of this intermediate with CO 2 and two protons is expected to produce the tetracarbonyl cation, [Mn(bpy)(CO) 4 ] + , thereby closing the catalytic cycle. However, this species has not been experimentally observed. In this study, [Mn(bpy)(CO) 4 ][SbF 6 ] ( 1 ) was directly synthesized and found to be an efficient electrocatalyst for the reduction of CO 2 to CO in the presence of H 2 O. Complex 1 was characterized using X-ray crystallography as well as IR and UV-Vis spectroscopy. The redox activity of 1 was determined using cyclic voltammetry and compared with that of benchmark manganese complexes, e.g. , [Mn(bpy)(CO) 3 Br] ( 2 ) and [Mn(bpy)(CO) 3 (MeCN)][PF 6 ] ( 3 ). Infrared spectroscopic analyses indicated that CO dissociation occurs after a single-electron reduction of complex 1 , producing a [Mn(bpy)(CO) 3 (MeCN)] + species. Complex 1 was experimentally verified as both a precatalyst and an on-cycle intermediate in homogeneous Mn-based electrocatalytic CO 2 reduction.
more »
« less
Elucidating the mechanism of photochemical CO 2 reduction to CO using a cyanide-bridged di-manganese complex
The complex, [{[Mn(bpy)(CO) 3 ] 2 }(μ-CN)] + (Mn2CN+), has previously been shown to photochemically reduce CO 2 to CO. The detailed mechanism behind its reactivity was not elucidated. Herein, the photoevolution of this reaction is studied in acetonitrile (MeCN) using IR and UV-vis spectroscopy. Samples were excited into the Mn I → π* bpy metal-to-ligand charge transfer (MLCT) absorption band triggering CO loss, and rapid MeCN solvent ligation at the open coordination site. It is concluded that this process occurs selectively at the Mn axial ligation site that is trans to the C-end of the bridging cyanide. Upon further photolysis, the metal–metal bonded dimeric species, [(CO) 3 (bpy)Mn–Mn(bpy)(CO) 3 ] (Mn–Mn) is observed to form under anaerobic conditions. The presence of this dimeric species coincides with the observation of CO production. When oxygen is present, CO 2 photoreduction does not occur, which is attributed to the inability of Mn2CN+ to convert to the metal–metal bonded dimer. Photolysis experiments, where the Mn–Mn dimer is formed photochemically under argon first and then exposed to CO 2 , reveal that it is the radical species, [Mn(bpy)(CO) 3 ˙ ] ( Mn˙ ), that interacts with the CO 2 . Since the presence of Mn–Mn and light is required for CO production, [Mn(bpy)(CO) 3 ˙] is proposed to be a photochemical reagent for the transformation of CO 2 to CO.
more »
« less
- Award ID(s):
- 1800400
- NSF-PAR ID:
- 10382701
- Date Published:
- Journal Name:
- Dalton Transactions
- Volume:
- 51
- Issue:
- 45
- ISSN:
- 1477-9226
- Page Range / eLocation ID:
- 17203 to 17215
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Manganese( i ) tricarbonyl complexes such as [Mn(bpy)(CO) 3 L] (L = Br, or CN) are known to be electrocatalysts for CO 2 reduction to CO. However, due to their rapid photodegradation under UV and visible light, these monomeric manganese complexes have not been considered as photocatalysts for CO 2 reduction without the use of a photosensitizer. In this paper, we report a cyanide-bridged di-manganese complex, {[Mn(bpy)(CO) 3 ] 2 (μ-CN)}ClO 4 , which is both electrocatalytic and photochemically active for CO 2 reduction to CO. Compared to the [Mn(bpy)(CO) 3 CN] electrocatalyst, our CN-bridged binuclear complex is a more efficient electrocatalyst for CO 2 reduction using H 2 O as a proton source. In addition, we report a photochemical CO 2 reduction to CO using the dimanganese complex under 395 nm irradiation.more » « less
-
more » « less
Abstract Herein, we report the synthesis and characterization of two manganese tricarbonyl complexes, MnI(HL)(CO)3Br (
1 a‐Br ) and MnI(MeL)(CO)3Br (1 b‐Br ) (where HL=2‐(2’‐pyridyl)benzimidazole; MeL=1‐methyl‐2‐(2’‐pyridy)benzimidazole) and assayed their electrocatalytic properties for CO2reduction. A redox‐active pyridine benzimidazole ancillary ligand in complex1 a‐Br displayed unique hydrogen atom transfer ability to facilitate electrocatalytic CO2conversion at a markedly lower reduction potential than that observed for1 b‐Br . Notably, a one‐electron reduction of1 a‐Br yields a structurally characterized H‐bonded binuclear Mn(I) adduct (2 a’ ) rather than the typically observed Mn(0)‐Mn(0) dimer, suggesting a novel method for CO2activation. Combining advanced electrochemical, spectroscopic, and single crystal X‐ray diffraction techniques, we demonstrate the use of an H‐atom responsive ligand may reveal an alternative, low‐energy pathway for CO2activation by an earth‐abundant metal complex catalyst. -
more » « less
Abstract A series of molecular Mn catalysts featuring aniline groups in the second‐coordination sphere has been developed for electrochemical and photochemical CO2reduction. The arylamine moieties were installed at the 6 position of 2,2’‐bipyridine (bpy) to generate a family of isomers in which the primary amine is located at the
ortho‐ (1‐Mn ),meta‐ (2‐Mn ), orpara‐ site (3‐Mn ) of the aniline ring. The proximity of the second‐sphere functionality to the active site is a critical factor in determining catalytic performance. Catalyst1‐Mn , possessing the shortest distance between the amine and the active site, significantly outperformed the rest of the series and exhibited a 9‐fold improvement in turnover frequency relative to parent catalyst Mn(bpy)(CO)3Br (901 vs. 102 s−1, respectively) at 150 mV lower overpotential. The electrocatalysts operated with high faradaic efficiencies (≥70 %) for CO evolution using trifluoroethanol as a proton source. Notably, under photocatalytic conditions, a concentration‐dependent shift in product selectivity from CO (at high [catalyst]) to HCO2H (at low [catalyst]) was observed with turnover numbers up to 4760 for formic acid and high selectivities for reduced carbon products. -
Herein we report heteroleptic Co( ii ) diimine complexes [Co(H 2 bip) 2 Cl 2 ] ( 1 ), [Co(H 2 bip) 2 Br 2 ] ( 2 ), [Co(H 2 bip) 3 ]Br 2 ·1MeOH ( 3 ) and [Co(H 2 bip) 2 (Me 2 bpy)]Br 2 ·(MeCN) 0.5 ·(H 2 O) 0.25 ( 4 ) (H 2 bip = 2,2′-bi-1,4,5,6-tetrahydropyrimidine, bpy = 2,2′-dipyridyl, Me 2 bpy = 4,4′-Me-2,2′-dipyridyl), purposefully prepared to enable a systematic study of magnetic property changes arising from the increase of overall ligand field from σ/π-donor chlorido ( 1 ) to π-acceptor 4,4′Me-2,2′bpy ( 4 ). The presence of axial and rhombic anisotropy ( D and E ) of these compounds is sufficient to allow 1–4 to show field-induced slow relaxation of magnetization. Interestingly, we found as the effective ligand field is increased in the series, rhombicity ( E / D ) decreases, and the magnetic relaxation profile changes significantly, where relaxation of magnetization at a specific temperature becomes gradually faster. We performed mechanistic analyses of the temperature dependence of magnetic relaxation times considering Orbach relaxation processes, Raman-like relaxation and quantum tunnelling of magnetization (QTM). The effective energy barrier of the Orbach relaxation process ( U eff ) is largest in compound 1 (19.2 cm −1 ) and gradually decreases in the order 1 > 2 > 3 > 4 giving a minimum value in compound 4 (8.3 cm −1 ), where the Raman-like mechanism showed the possibility of different types of phonon activity below and above ∼2.5 K. As a precursor of 1 , the tetrahedral complex [Co(H 2 bip)Cl 2 ] ( 1a ) was also synthesized and structurally and magnetically characterized: this compound exhibits slow relaxation of magnetization under an applied dc field (1800 Oe) with a record slow relaxation time of 3.39 s at 1.8 K.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d2dt02506j
